Generated by All in One SEO Pro v5.0.1.1, this is an llms-full.txt file, used by LLMs to index the site. # ATI Outdoors Firearm Parts & Accessories ## Posts ### [Blog](https://www.atioutdoors.com/blog/) **Published:** August 26, 2021 **Author:** John Chvala --- ### [Glock vs 1911: Which Is Better in 2026? Full Comparison Guide](https://www.atioutdoors.com/glock-vs-1911-which-is-better-in-2026-full-comparison-guide/) **Published:** June 30, 2026 **Author:** msarver **Content:** **Glock vs 1911: Which Handgun is Better? The Ultimate Debate** In the firearms community, few questions spark as much passion as the **Glock vs 1911** debate. For decades, shooters have argued over which platform reigns supreme: the modern, polymer-framed striker-fired Glock or the classic, all-steel single-action 1911. Whether you’re searching for the “best handgun for concealed carry,” “Glock versus 1911 reliability,” or simply “Glock vs 1911 which is better,” this comparison cuts through the noise. Both pistols have proven themselves in military service, law enforcement, competition, and self-defense. Yet they represent two completely different philosophies—one built for simplicity and volume, the other for precision and tradition. In this 2026 guide, we break down every key factor so you can decide which legendary handgun fits your needs. **A Brief History: Two Icons Born in Different Eras** The **1911** was designed by John M. Browning and adopted by the U.S. military in 1911. Chambered primarily in .45 ACP, it earned its stripes through two World Wars and remains a favorite among purists. Its steel frame, short-recoil operation, and crisp single-action trigger defined American fighting pistols for generations. Fast-forward to 1982: Austrian engineer Gaston Glock introduced the Glock 17—a lightweight polymer pistol with a safe-action trigger and high-capacity double-stack magazine. Originally chambered in 9mm, it quickly won over police departments and militaries worldwide thanks to its reliability, low maintenance, and ease of use. Today, the **Glock vs 1911** showdown often pits models like the Glock 19 or 17 against a full-size 1911 Government model. **Design and Construction: Polymer vs Steel** At their core, these handguns couldn’t be more different. A traditional **1911** features an all-steel frame and slide, a locked-breech short-recoil system, and an external hammer. It’s heavier (typically 38–42 oz unloaded) but feels solid and balanced. Most 1911s are single-stack, holding 7–8+1 rounds of .45 ACP. The **Glock** uses a polymer frame with a steel slide and striker-fired system. At just 22–25 oz unloaded for a Glock 19, it’s dramatically lighter and more comfortable for all-day carry. Double-stack magazines deliver 15–17+1 rounds in 9mm (or 13+1 in .45 ACP on models like the Glock 21). **Winner on materials**: Glock for everyday practicality; 1911 for that premium, heirloom feel. **Reliability and Durability: Glock vs 1911 in the Real World** Both pistols are battle-proven, but their reliability reputations differ. Glocks have a near-mythical tolerance for dirt, sand, and neglect. Military testing often shows them running thousands of rounds between failures with minimal cleaning. The polymer frame resists corrosion, and the simple internal design means fewer parts to fail. High-end 1911s from manufacturers like Wilson Combat or Dan Wesson can match or exceed Glock reliability—but they require more attention. Tighter tolerances mean more frequent cleaning and occasional tuning. Drop a cheap 1911 in the mud and you may regret it; a Glock will likely shrug it off. **Glock vs 1911 reliability verdict**: Glock wins for “set it and forget it” users. A quality 1911 rewards owners who maintain it properly. **Trigger, Accuracy, and Shooting Experience** This is where opinions split hardest. The **1911** offers one of the best factory triggers in the business—crisp, light (often 4–5 lbs), and short-reset. The grip angle and narrow single-stack frame make it point naturally for many shooters. With proper sights and tuning, 1911s excel at precision shooting out to 25–50 yards. Glock triggers are famously “mushy” and heavier (5–6 lbs) with a longer reset. However, aftermarket options like Glock connectors or stippling kits can dramatically improve them. The wider grip and higher capacity can make follow-up shots slightly slower for some, though the polymer frame soaks up recoil well in 9mm. **Accuracy edge**: 1911 for out-of-the-box precision and feel. Many competitive shooters still prefer it in single-stack divisions. **Capacity, Concealed Carry, and Ergonomics** If you’re shopping for a **concealed carry handgun**, capacity and weight matter. A Glock 19 slips easily into an inside-the-waistband holster and gives you nearly double the rounds of a standard 1911. Its lighter weight reduces fatigue during long days of carry. The 1911’s heavier steel frame can print more and become uncomfortable for all-day EDC, though modern lightweight 1911s (alloy frames or Commander-size) close the gap. Its manual thumb safety requires training but allows “cocked-and-locked” carry with a round chambered. Glocks rely on internal safeties and the trigger safety—no external levers to manipulate under stress. **Glock vs 1911 for concealed carry**: Glock dominates modern EDC. Many experts recommend it for beginners and professionals alike. **Maintenance, Cost, and Customization** Glocks are legendary for simplicity. Field-strip one in seconds with no tools. Replacement parts are cheap and plentiful. A new Glock 19 Gen5 starts around $500–$600. 1911s demand more love. They often need fitting, spring tuning, and occasional gunsmithing. A quality 1911 can cost $800–$2,000+, though budget options exist. The upside? The 1911 platform is infinitely customizable—triggers, grips, sights, and barrels turn it into a personal masterpiece. **Value verdict**: Glock for budget-conscious shooters who want reliability without fuss. 1911 for enthusiasts who enjoy the journey of ownership. **Pros and Cons at a Glance** **Glock Pros** - Higher capacity (15–17+1 typical) - Lightweight and corrosion-resistant - Extremely reliable with minimal maintenance - Affordable and easy to shoot for beginners - Optics-ready models dominate the market **Glock Cons** - Trigger can feel spongy - Polymer frame feels less premium to some - Snappier recoil in lighter models **1911 Pros** - World-class single-action trigger - Classic ergonomics and natural point of aim - Legendary stopping power in .45 ACP - Highly customizable - Timeless aesthetics and heritage **1911 Cons** - Lower capacity (7–8+1 standard) - Heavier for all-day carry - Requires more maintenance and training - Higher price for quality examples **So… Which Handgun Is Better? Glock vs 1911 Verdict** There is no universal “better” pistol—only the better tool for *you*. Choose a **Glock** if you prioritize: - Concealed carry or duty use - Maximum rounds on tap - Simplicity and low maintenance - Modern optics and accessories Choose a **1911** if you want: - A crisp trigger that makes every shot feel effortless - Classic single-stack ergonomics - A pistol you’ll enjoy maintaining and customizing - That unmistakable “old-school cool” factor Many experienced shooters own both. They keep a Glock 19 for everyday carry and a custom 1911 for range days or competition. In 2026, both platforms continue to evolve—Glock with Gen5/6 models and MOS optics cuts, 1911s with rail-equipped Commanders and alloy frames. **Final Thoughts: The Debate Will Never End** The **Glock vs 1911** argument is as old as the guns themselves—and that’s exactly why it’s fun. Both have saved lives, won matches, and earned loyal followings for good reason. Ultimately, the best handgun is the one you train with, shoot comfortably, and can deploy confidently when it counts. Rent both at your local range. Put 200 rounds through each. Feel the difference in your hands. **Categories:** Handguns --- ### [SKS Rifle Instruction Manual | SKS0700 Shooting & Maintenance Guide](https://www.atioutdoors.com/elementor-124374/) **Published:** June 30, 2026 **Author:** John Chvala **Content:** The **SKS0700 SKS Rifle Instruction Manual** provides safety, shooting, maintenance, disassembly, cleaning, and parts reference information for 7.62x39mm SKS rifles. SKS0700 # SKS ![SKS 7.62x39mm rifle](https://www.atioutdoors.com/wp-content/uploads/2026/06/Rifle-Cover.webp)7.62x39mm Rifles **Instruction Manual** For Shooting & Maintenance ## Table of Contents - [Warnings and Disclaimers](#warnings) - [History of the SKS](#history) - [Safety Guidelines](#safety-guidelines) - [Operative Cautions](#operative-cautions) - [Specifications](#specifications) - [Main Parts and Accessories](#main-parts) - [Loading the SKS](#loading) - [Unloading the SKS](#unloading) - [Disassembly/Assembly](#disassembly) - [Cleaning Procedures](#cleaning) - [Removing Trigger Mechanism/Magazine](#trigger-magazine) - [Removing Receiver Barrel Assembly from Stock](#receiver-stock) - [Sight Adjustment](#sight-adjustment) - [Mounting the Bayonet](#mounting-bayonet) - [Parts Legend](#parts-legend) - [Exploded View of Gun](#exploded-view) ## Important: Warnings and Disclaimers ### Warning Careless use of any firearm can be dangerous. The warnings and instructions in this manual should be read thoroughly so that you might fully understand how to properly use your SKS rifle. Accidental discharge can occur from careless handling and could cause serious injury, death, or damage to property. SKS rifles should be cleaned thoroughly prior to use. ### Danger - Ammunition Warning Use only 7.62x39mm Soviet ammunition in your SKS rifle. Never attempt to use ammunition of any other caliber in your gun. Use only newly manufactured ammunition that is of high quality and in good condition. Never use remanufactured or hand-loaded/reloaded ammunition, or ammunition that is faulty, incorrect, or nonstandard, as both the manufacturer and the importer of this firearm specifically disclaim responsibility for any damage or injury whatsoever occurring in connection with, or as the result of, the use of such ammunition with this firearm. ![7.62x39mm ammunition](https://www.atioutdoors.com/wp-content/uploads/2026/06/Bullets.webp) 7.62x39mm ammunition ## History of the SKS The concept of the assault rifle began with the Soviets in the early 1900s. Later, during World War I, Vladimir Federov introduced the Federov 1916 Automatic Rifle, which fired a 6.5x50.5SR Japanese cartridge. At this time this cartridge was thought to be the best for use in rapid-firing rifles. These guns were used toward the end of the 1914-18 war and the Russo-Finnish War of 1939-40. During World War II, the Russians' need for the Avtomat increased, and they adopted use of a 7.62x39mm cartridge. The weapon created by S. G. Simonov to fire this cartridge was the SKS-45, Samozaryadni Karabin Simonova, a self-loading carbine, which was a scaled-down version of the 14.5x111.8mm PTRS anti-tank rifle. The SKS-45 was easy to field strip and maintain and was quite popular. At this same time, M. T. Kalashnikov was working on designing a series of small arms, which would also use the 7.62x39mm cartridge. He was successful, and developed one of the best known military weapons of our time, the AK-47, Avtomat Kalashnikova, in 1947. The AK-47 was the prototype for many subsequent versions, and the Chinese manufactured SKS Type 56 rifle is a direct derivative of Kalashnikov's design. At the conclusion of World War II, the People's Republic of China inherited many of these Soviet weapons from the Japanese. The Japanese had seized them in Manchuria. During the Chinese Civil War, the PRC began making this equipment, and by war's end were well on their way to standardizing production of these Soviet-type small arms. In recent years, the People's Republic of China has been producing the 7.62x39mm Type 68, the 7.62x39mm Type 67, the 7.62x25mm Type 64, and the SKS Type 56 with the distinguishing folding bayonet. The SKS Type 56 was encountered frequently during the Vietnam War. As a military weapon, the SKS rifle is only used by frontier forces; however, it remains ever popular with the American sportsman as a hunting weapon, and as always with collectors and firearms enthusiasts. ## Safety Guidelines for Proper Operation of Firearms 1. Always treat a firearm as if it were loaded. Accidents happen when it is alleged that the weapon is unloaded. 2. Keep the muzzle of the firearm pointed toward a safe direction at all times. Never point a weapon at anything you do not intend to destroy. 3. Never rely exclusively on your gun's safety mechanism. It is only an aid to safe gun handling, but it is a device which could fail or be inadvertently disengaged. 4. Check to see that the barrel is free of obstruction before firing. Remove all grease, oil, or other debris to prevent the barrel from rupturing upon firing. Check the bore, the chamber, and magazine assembly. 5. Be absolutely certain of your target and the backstop. Make sure your backstop is sound, and to prevent ricochet, never shoot at hard objects or water. 6. Always wear shooting glasses and ear protection while shooting. 7. Understand the operating principle of the firearm and become familiar with its handling characteristics before attempting to use it. 8. Be certain you are using the correct ammunition. Use only high-quality military or commercial ammunition. Do not use reloaded or hand-loaded cartridges. 9. Keep the firearm unloaded when it is not in use. Store ammunition separately from the gun. Do not transport a loaded weapon. 10. In case of failure to fire, always keep the muzzle pointed in a safe direction and hold the firearm in this position for 30 seconds. After 30 seconds, remove the magazine, open the action, and retrieve the cartridge. ## Operative Cautions for Firing SKS Rifles or Any Semi-Automatic Weapon ### Test Your Gun 1. Load two rounds of ammunition into the magazine. 2. While in a stable firing position, point the muzzle downward. 3. Pull the charging handle or slide back, and let it fly forward to chamber the first round. 4. If your weapon fires, stop firing and unload weapon. This is called a slam fire. 5. If there is no slam fire, aim the weapon and pull the trigger. 6. If both rounds fire with one pull of the trigger, stop firing. This is called doubling. 7. Either situation is dangerous, and the gun should not be fired. Take the weapon to a gunsmith or place of purchase. ### Cautions 1. Do not allow rifle to be heated or sunburnt. 2. Frequently lubricate your weapon. 3. Frequently clean your weapon, particularly the gas system and bore. Always cover with a light coat of gun oil after cleaning. 4. When storing, always keep the hammer in its released position. **Thoroughly clean your SKS rifle prior to use!** ## Specifications ModelSKS Type-56 Caliber7.62mm Weight8.4 lbs. approx. Length40.20 inches Barrel20.5 inches, 4 groove, R.H. twist Muzzle Velocity2,410 f.p.s. Magazine10-round fixed box Aiming Range0.621 mile / 1 kilometer ## Main Parts and Accessories ### The SKS Rifle Consists of 11 Main Parts 1. Recoil spring assembly 2. Receiver cover 3. Receiver 4. Bolt 5. Gas tube/handguard assembly 6. Bayonet 7. Stock 8. Trigger group 9. Magazine 10. Barrel 11. Cleaning rod ### The Basic SKS Accessories 1. Cleaning rod head 2. Drift 3. Brush 4. Oil can 5. Accessory case 6. Muzzle cap 7. Gas port cleaning tool 8. Clip It will be helpful to refer to the parts described and shown on these two pages when following the instructions in this manual. Pages 18-19 list all available parts. ## Loading the SKS **Always remain conscious of muzzle position.** 1. Flip the safety to the ON position. See Figure 3. 2. Pull charging handle on bolt carrier back until the action locks open. 3. Load with either single rounds or stripper clips. See Figure 4. 4. Again, remain conscious of muzzle position. 5. Pull charging handle back and let the bolt carrier fly forward to chamber the first round. 6. Your rifle is now loaded. ![SKS loading instructions, Figures 3 and 4](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-3-4.webp)Figures 3 & 4### Instructions for Firing **Always remain conscious of muzzle position.** 1. Aim rifle down range. 2. Release the safety. 3. Place finger inside trigger guard on the trigger. 4. Pull the trigger back. ## Unloading the SKS ### After Firing **Always remain conscious of muzzle position.** When the gun is fired, gas pressure is extracted from the spent cartridges, and they are ejected. New rounds are then automatically fed until all the rounds are gone, or the shooter stops firing. When finished firing, lock back the bolt and always engage the safety before unloading unused cartridges. ### Instructions for Unloading **Always remain conscious of muzzle position.** 1. If bolt was locked back, rifle should be unloaded. 2. Visually inspect the magazine and chamber to confirm that gun is empty. 3. If unsure whether empty, immediately place the safety in the ON position. 4. Release the magazine cover by pulling back the magazine cover latch. See Figure 5. 5. Any unexpended rounds will now be freed from the magazine. 6. Now, lock the magazine cover back in place. 7. Next, pull back the charging handle to the rear and extract and eject the live round in the chamber. The bolt stop will automatically lock the bolt carrier back. See Figure 6. 8. Again, visually inspect the weapon. ![SKS unloading instructions, Figures 5 and 6](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-5-6.webp)Figures 5 & 6 ## SKS Disassembly/Assembly Make a safe examination of the rifle to be certain it is not loaded before stripping. Open the magazine cover, draw back bolt and look into magazine and chamber to be certain they are empty. ### Instructions for Disassembly/Assembly 1. Take out all accessories. With a finger, press in the cover of the accessory chamber on the butt plate and take the case for accessories out of the stock. See Figure 7. Open the case and take out the accessories. 2. To remove the cleaning rod: swing the bayonet outward from the muzzle of the rifle and remove the cleaning rod. Then, fold the bayonet back down to a march position. 3. To remove receiver cover and recoil spring assembly: hold the small of the stock with your left hand, pressing with your thumb on the rear of the receiver cover. See Figure 8. Rotate with the right hand the receiver cover retaining pin arm upward to its vertical position and pull the pin out to the right as far as possible. See Figure 9. Allow receiver cover to move backward 1/2 inch and remove by sliding to rear. See Figure 10. Remove the recoil spring from the rear of the bolt carrier. See Figure 11. Be certain to reinstall recoil spring with C-clip end forward. 4. To remove the bolt: pull the bolt back as far as it will go and remove the entire assembly. See Figure 12. When reinstalling bolt, be certain magazine cover is not latched. 5. To remove Gas Tube/Handguard Assembly: use a pin punch to pry the lever located on right of rear sight base into the position where the camming surface located at the front is completely vertical. See Figure 13. CAUTION: Further movement will allow operating rod and spring to escape. 6. Now remove the Gas Tube/Handguard Assembly. Raise the handguard assembly and rock it slowly from side to side until it can be pulled away from the gas block. See Figure 14. 7. The gas piston can now be pulled out of the gas tube/handguard assembly. **Note:** The seven steps listed are sufficient to field-strip the rifle for cleaning and regular maintenance. **Assembly requires only that you perform the above steps in reverse order.** ![SKS accessory case removal, Figure 7](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-7.webp)Figure 7 ![SKS receiver cover and recoil spring removal, Figures 8 through 11](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figures-8-9-10-11.webp)Figures 8, 9, 10, & 11 ![SKS bolt removal, Figure 12](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-12.webp)Figure 12 ![SKS gas tube and handguard removal, Figures 13 and 14](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-13-14.webp)Figures 13 & 14 ## Cleaning the SKS Make a safe examination of the rifle to be certain it is not loaded before cleaning. To clean, begin with the rifle field-stripped. See disassembly instructions beginning on page 10. ### Instructions for Cleaning the Rifle 1. Attach the bore brush to the cleaning rod. 2. Saturate the bore brush with gun solvent and push through the length of the barrel. See Figure 15. If using corrosive primer, this step is very important to remove the corrosive residue from the barrel of your rifle. 3. Make at least 10 passes through the barrel from the muzzle end. The cap of the accessory tube can be used to protect the crown of the muzzle from damage during cleaning. Use a cleaning jag or slotted tip and push a clean dry patch through the bore. Now pass a clean patch soaked with solvent through the bore. Alternate this procedure with wet and dry patches until the patches come out clean. 4. Dry the bore with a clean dry patch, and then apply a thin coat of oil to the bore with a final oil-soaked patch. 5. While cleaning the bore, you should also give the chamber area a thorough brushing as well. Use the same technique with the patches, alternating wet and dry until the chamber is clean. Do not leave oil residue in the chamber. 6. Clean the bolt, bolt carrier, piston, recoil spring and receiver. A toothbrush can be used effectively for cleaning these parts. Wipe them dry, and then coat the bearing surfaces of the bolt and bolt carrier with a thin coat of grease. Do not pour oil into the receiver indiscriminately. 7. Clean the gas port and gas block area. See Figure 16. Remove the gas piston from the handguard and gas cylinder assembly, and clean thoroughly with solvent. Remove all carbon fouling with a clean rag, then apply a light coat of oil. Gas port cleaning tool is normally not included in basic cleaning kits, but is available from SKS parts dealers. **Before firing, check the bore for obstructions.** ![SKS bore cleaning, Figure 15](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-15.webp)Figure 15 ![SKS gas port and gas block cleaning, Figure 16](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-16.webp)Figure 16 **To reassemble, reverse the takedown process.** ## Removing Trigger Mechanism/Magazine **Prior to start, be certain rifle is not loaded.** 1. Place the safety in the ON position. 2. Release box magazine cover. 3. Use a pin punch to strike the trigger mechanism retaining button at rear of trigger bow. See Figure 17. 4. Once released, the trigger assembly can be pulled back from the stock assembly. 5. With the trigger mechanism removed, and the bolt locked in the open position, the magazine can be taken out of the stock by simultaneously pulling the magazine down and to the rear. See Figure 18. When reinstalling magazine, be certain front of magazine is engaged in lug on receiver. ![SKS trigger mechanism and magazine removal, Figures 17 and 18](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-17-18.webp)Figures 17 & 18**Note:** Foreign material in trigger group is a major cause of SKS doubling or slam firing. Trigger group should be cleaned and lubricated regularly. **At this time, receiver/barrel/stock assembly may be removed.** ## Removing Receiver Barrel Assembly from Stock **Prior to start, remove trigger mechanism/magazine. See instructions on page 15.** 1. Extend bayonet. 2. Lay gun on padded table upside down. 3. With right hand hold rear of receiver assembly tightly against table with screwdriver or punch. With left hand, lift up firmly on stock separating the two pieces. See Figure 19. ![Figure 19 - Remove receiver barrel assembly from stock](https://www.atioutdoors.com/wp-content/uploads/2026/06/Figure-19.webp)Figure 19**Note:** Crossbolt removal is not required or recommended. **Assembly requires only that you perform the above steps in reverse order.** ## Sight Adjustment ### Elevation Using a front sight elevation tool, insert the forked end of the tool into the top of the front sight hood. Engage the tool into the flats of the front sight post. Turn the tool counterclockwise to lower the bullet's point of impact on target. To raise the point of impact, turn the tool clockwise. ### Windage Using a small mallet and brass punch, or an aftermarket windage adjustment tool, windage can be adjusted by drifting the front sight seat in the direction desired. From the perspective of a sight picture, move the front sight seat in the opposite direction you want your point of impact to shift. For example, to move the group on the target to the left, drift the front sight seat to the right. The rear sight is an open notch type which is adjustable for elevation from 100 meters to 1000 meters, or 110 yards to 1100 yards. There is also an all-purpose battle setting on the sight ladder, set for 300 meters, or 330 yards. This is attained by moving the elevation slide to the rear of the ladder as far as it will go. ## Mounting the Bayonet Begin by sliding the bayonet handle and the bayonet spring over the tang of the spike bayonet. Push downward on the handle until the slot for attaching the bayonet screw is exposed. Hold the bayonet carefully in this position with the muzzle ring facing the muzzle of the rifle and insert the bayonet pin into its proper slot in the bayonet lug. Tighten the bayonet pin with a screwdriver of proper size. ## Parts Legend 1. Piston 2. Handguard and gas cylinder 3. Piston extension 4. Piston return spring 5. Front sight 6. Front sight seat 7. Handguard catch 8. Bayonet screw 9. Bayonet assembly 10. Hold open latch pin 11. Hold open latch spring 12. Hold open latch 13. Receiver and barrel assembly 14. Takedown latch 15. Trigger guard latch 16. Latch pin 17. Rear housing 18. Bolt carrier 19. Bolt 20. Firing pin retainer 21. Firing pin 22. Extractor spring 23. Extractor 24. Recoil spring 25. Spring retainer 26. Large spring guide 27. Small spring guide 28. Stock assembly 29. Trigger guard spring 30. Magazine 31. Magazine follower 32. Follower spring 33. Hinge pin 34. Magazine cover 35. Cover latch 36. Latch spring and sear spring 37. Sear 38. Latch stop pin 39. Trigger guard 40. Disconnector hinge 41. Trigger pin 42. Safety catch 43. Safety catch spring 44. Trigger 45. Safety catch pin 46. Trigger bar 47. Trigger bar pin 48. Trigger spring 49. Disconnector 50. Rebound disconnector 51. Hammer 52. Hammer strut pin 53. Hammer strut 54. Hammer spring 55. Cleaning rod ## Exploded View of Gun ![Exploded view of SKS rifle parts](https://www.atioutdoors.com/wp-content/uploads/2026/06/SKS-Exploded-view.webp) Exploded view of gun SKS0700 - 7.62x39mm Rifles Instruction Manual for Shooting & Maintenance. **Categories:** SKS --- ### [Reliable Firearm Accessories for Hunting and Shooting | ATI Outdoors](https://www.atioutdoors.com/reliable-firearm-accessories-for-hunting-and-shooting-ati-outdoors/) **Published:** March 26, 2026 **Author:** John Chvala **Content:** # **Built for the Field: Why Reliability Matters in Firearm Accessories** When you’re out in the field—whether it’s before sunrise in a deer stand or at the range dialing in your setup—**reliability in your firearm accessories** is everything. At ATI Outdoors, we design and manufacture **durable firearm accessories**, including rifle stocks, magazines, and tactical upgrades, built to perform in real-world conditions—not just controlled environments. ## **Why Reliability Is Critical for Hunting and Shooting** Hunting and shooting environments are unpredictable. Weather shifts, terrain changes, and equipment takes a beating. In these moments, your gear must perform without hesitation. Reliable **shooting accessories and gun parts** ensure: - Consistent accuracy - Improved handling and control - Reduced risk of failure in critical moments - Confidence in every shot When your equipment fails, opportunities are lost. That’s why reliability isn’t optional—it’s essential. ## **Engineered for Performance and Durability** ATI Outdoors products are built with advanced materials and precision engineering to deliver long-lasting performance. Our **firearm upgrades and accessories** focus on: - Lightweight, high-strength polymer construction - Ergonomic design for better grip and control - Easy installation and adjustability - Compatibility across popular platforms Whether you’re upgrading your AR platform or improving your hunting rifle, our products are designed to enhance both performance and reliability. ## **Field-Tested Firearm Accessories You Can Trust** Lab testing is important—but real-world testing is what truly matters. ATI Outdoors products are tested in harsh environments to ensure they hold up under: - Heavy recoil - Extreme weather conditions - Dirt, mud, and moisture exposure - High round counts This commitment ensures our **rifle stocks, magazines, and shooting accessories** perform when you need them most. ## **Build Confidence Into Every Shot** Reliable gear changes how you perform. When your setup is solid and predictable, you can focus entirely on your target. With ATI Outdoors, you get: - Dependable performance - Consistent results - Gear you can trust in the field or at the range That confidence is built into every product we make. ## **Upgrade Your Firearm with ATI Outdoors** As the demands of shooters and hunters evolve, ATI Outdoors continues to innovate—delivering **high-quality firearm accessories** that meet modern performance standards. If you’re looking for **durable, reliable gun parts and upgrades**, ATI Outdoors has you covered. --- ### **Explore ATI Outdoors Products Today** Upgrade your setup with dependable **rifle stocks, magazines, and firearm accessories** designed for real-world performance. **Categories:** ATI Intel --- ### [Upgrade Savage Stevens 320 Shotgun with ATI T3 GEN2 Tactical Stock | Recoil Reduction & Adjustability](https://www.atioutdoors.com/upgrade-savage-stevens-320-shotgun-with-ati-t3-gen2-tactical-stock-recoil-reduction-adjustability/) **Published:** March 27, 2026 **Author:** msarver **Content:** # Upgrade Your Savage Stevens 320 Shotgun: The ATI T3 GEN2 Stock That Changes Everything The Savage Stevens 320 shotgun has earned a loyal following among hunters, home defenders, and tactical shooters alike. Affordable, reliable, and chambered in 12 gauge, the Stevens 320 delivers solid pump-action performance right out of the box. But if you want to unlock the full potential of this versatile firearm, upgrading your stock is one of the best moves you can make—and the ATI T3 GEN2 Shotgun Stock (SKU: C.1.10.2007) stands above the rest. ## Why the Savage Stevens 320 Deserves a Better Stock The Stevens 320 ships with a standard hardwood or synthetic stock that gets the job done for basic applications. However, shooters looking for improved ergonomics, adjustability, and tactical versatility quickly discover the factory stock’s limitations. It offers no length-of-pull adjustment, no pistol grip for rapid follow-up shots, and no recoil management beyond a thin rubber pad. Whether you’re running 3-inch shells for home defense or hunting heavy loads in the field, felt recoil can become fatiguing during extended range sessions. That’s where ATI Outdoors comes in. ATI has been manufacturing premium American-made firearm accessories for decades, and their T3 GEN2 stock is purpose-engineered to transform your Stevens 320 into a far more capable, comfortable platform. ## Introducing the ATI T3 GEN2 Shotgun Stock (SKU: C.1.10.2007) The ATI T3 GEN2 Shotgun Stock is one of the most popular Savage Stevens 320 accessories on the market—and for good reason. Carrying a Limited Lifetime Warranty, this Made-in-the-USA stock is packed with features that enhance every aspect of your shooting experience. It’s available in Black, Flat Dark Earth, Destroyer Gray, and Urban Combat color options to match your personal style or operational needs. ## Key Features of the ATI T3 GEN2 Stock ### TactLite GEN2 6-Position Adjustable Mil-Spec Stock The T3 GEN2 features a six-position adjustable collapsible design that allows you to dial in your ideal length of pull—ranging from 13-1/8 inches to 16-5/8 inches. The proprietary TracLOCK GEN2 System eliminates horizontal and vertical play in the stock, providing a rock-solid lock-up without secondary locking mechanisms or snag-prone hardware. Whether you’re wearing a heavy hunting jacket in the field or a chest rig for home defense, you can set this stock for a perfect cheek weld every time. ### X Series Recoil Reducing Pistol Grip The integrated X Series pistol grip features a built-in recoil-absorbing backstrap and an ergonomic slim-line design with sure-grip texture for maximum control. The pistol grip geometry allows for faster trigger manipulation and more natural control under stress—a critical upgrade for any Stevens 320 used in defensive applications. ### X2 Recoil Reducing Butt-Pad One of the standout upgrades in this stock is the X2 Recoil Reducing Butt-Pad—a 1-1/4-inch thick pad engineered to absorb recoil impact before it reaches your shoulder. ATI designed this pad to work across any load size, from light target loads to heavy magnum slugs, so you can shoot longer without fatigue or pain. The pad is also unaffected by extreme temperatures and chemical exposure, meaning it won’t degrade in harsh field conditions. ### Adjustable & Removable Cheekrest The T3 GEN2 includes an elongated adjustable cheekrest that provides up to half an inch of vertical adjustment, accommodating shooters of all heights and builds. This is particularly valuable if you plan to mount optics on your Stevens 320, as a consistent cheek weld is essential for accurate target acquisition. ### Dual QD Sling Attachment & Tactical Sling Slots Ready for serious work, the T3 GEN2 features dual-sided QD (quick-detach) sling attachment points plus dual slots for tactical sling attachment—giving you multiple carry configurations for any mission or hunt. No more aftermarket sling adapters needed. ### DuPont® Extreme Reinforced Polymer Construction The entire stock assembly is built from DuPont® extreme reinforced polymer, making it scratchproof and weatherproof while remaining lightweight. This is not cheap injection-molded plastic—it’s the same class of material used in premium duty-grade firearms accessories. ## Compatibility Notes for the Savage Stevens 320 The T3 GEN2 (C.1.10.2007) fits most Savage Stevens 320 12-gauge models produced before 2016 using the included universal mount system—no specialized tools required. If your Stevens 320 was manufactured in 2017 or later (identifiable by a thicker trigger guard), you will need to purchase the separate T3 Shotgun Stock Adapter for Savage 320 (2017–current), also available at atioutdoors.com. All mounting hardware for supported models is included in the box. The T3 GEN2 also fits a wide range of other popular shotguns including Mossberg 500/590/835, Remington 870, Winchester SXP, Maverick 88, TriStar Raptor, Charles Daly 301, and FNH USA P-12—making it an exceptional value if you own multiple platforms. ## What Shooters Are Saying With over 326 verified customer reviews and a rating of 4.85 out of 5 stars on atioutdoors.com, the T3 GEN2 speaks for itself. Reviewers consistently praise the ease of installation, the quality of the fit and finish, the effectiveness of the recoil pad, and the versatility of the adjustable length of pull. One verified buyer noted it was easy to install and felt great, even on a model not officially listed among the supported firearms—a testament to the universal mount system ATI engineered into this design. ## Upgrade Your Stevens 320 Today If you own a Savage Stevens 320 shotgun and want to maximize its performance, the ATI T3 GEN2 Shotgun Stock (C.1.10.2007) is the upgrade you’ve been looking for. With a six-position adjustable stock, aggressive recoil management, a tactical pistol grip, QD sling attachments, and rugged American-made polymer construction—all backed by a Limited Lifetime Warranty—this is the most complete stock upgrade available for the Stevens 320 platform at any price point. **Categories:** Additional Shotguns --- ### [M1 Carbine Guide 2026: History, Variants, Manufacturers & CMP Buying Tips](https://www.atioutdoors.com/m1-carbine-guide-2026-history-variants-manufacturers-cmp-buying-tips/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Origins of a Legend: Why the M1 Carbine Was Built** In 1940, the U.S. Army identified a critical need. Support troops—including paratroopers, medics, and engineers—found the standard-issue M1 Garand too heavy and cumbersome for their specialized roles. Conversely, the M1911 pistol lacked the range and stopping power required for sudden front-line engagements. The solution was a lightweight, semi-automatic carbine. Winchester eventually won the design contract, producing a firearm that weighed just over 5 pounds. Unlike its big brother, the Garand, which used 8-round en bloc clips, the M1 Carbine utilized 15-round detachable box magazines, offering a significant firepower advantage in close-quarters combat. **Technical Specifications** For those interested in the mechanics, the M1 Carbine is a masterpiece of mid-century engineering: - **Caliber:** .30 Carbine (7.62×33mm) - **Action:** Gas-operated, rotating bolt - **Muzzle Velocity:** ~1,990 feet per second - **Effective Range:** 300 yards - **Weight:** 5.2 lbs (unloaded) - **Length:** 35.6 inches **Key Variations: M1, M1A1, and the Selective-Fire M2** Not all carbines are created equal. If you are browsing the 2026 surplus market, you will likely encounter these primary variants: 1. **The Standard M1** The most common version, featuring a solid wood stock. Early models (1942–1943) often feature “high wood” stocks and “L-type” flip sights, which are highly prized by collectors today. 2. **The M1A1 Paratrooper** Recognizable by its folding metal wire stock and leather cheek pad, the M1A1 was manufactured exclusively by the Inland Division of General Motors. Genuine M1A1s are among the most expensive pieces in the military surplus world. 3. **The M2 Carbine** Introduced late in the war (1944), the M2 added a selective-fire switch, allowing for full-automatic fire at a rate of 650–750 rounds per minute. *Note: In the U.S., these are strictly regulated under the NFA.* **Top M1 Carbine Manufacturers to Watch For** During WWII, the U.S. government contracted ten primary manufacturers to keep up with the war effort. Knowing your manufacturer is key to determining value: - **Inland (General Motors):** Produced over 2.6 million units. - **Winchester:** The original designer; highly sought after for brand prestige. - **Rock-Ola:** Originally a jukebox manufacturer; their carbines are rare and command a premium. - **IBM:** Yes, the computer giant produced over 300,000 carbines! - **Quality Hardware:** Known for using various subcontracted parts. **Collecting and Shooting in 2026** The market for M1 Carbine surplus has changed significantly over the last decade. As of 2026, finding a “shopper” grade carbine for under $1,000 is becoming increasingly rare. **The CMP Resurgence** The Civilian Marksmanship Program (CMP) remains a primary source for authentic rifles. In a surprising 2025-2026 update, the CMP began offering “expert grade” restorations, reclaiming receivers from ceremonial “drill” rifles and rebuilding them with new barrels and stocks. This has provided a more affordable entry point for shooters who want a reliable range tool rather than a “safe queen.” **Shooting Performance** Is the M1 Carbine accurate? While it won’t outshoot a modern precision rifle, a well-maintained M1 is capable of 1.5 to 3 MOA accuracy at 100 yards. The low recoil makes it an excellent choice for new shooters or those who enjoy “vintage service rifle” matches. **Pro Tip:** If you’re buying a shooter, look for a “Type 3” barrel band (which includes a bayonet lug) and an adjustable rear sight. These late-war or post-war upgrades offer much better practical accuracy than the early “flip” sights. **Conclusion: A Timeless Piece of History** The M1 Carbine remains a favorite because it is fun to shoot, easy to carry, and carries the weight of history in every walnut stock. Whether you are hunting for an all-original Winchester M1 or a new CMP restoration, this rifle is a cornerstone of any serious collection. **Article Sources:** **Historical & Technical References** - **Pritzker Military Museum & Library: Used for the 1940 Ordnance Corps development timeline and the specific design requirements (the “5-pound” rule).** - **RJ Militaria (“The M1 Carbine – A Brief History”): Provided the context on German “Blitzkrieg” tactics necessitating a light rifle for support troops.** - **Weaponsystems.net: Sourced the technical mechanical specs, including the muzzle velocity ($1,990$ fps) and gas-operated rotating bolt details.** - **M1 Collectors Club: Provided the comprehensive list of 10 primary manufacturers and the specific serial number blocks used to identify authentic WWII production.** **Collector & Market Data (2025–2026)** - **Civilian Marksmanship Program (CMP) Official Site: Verified the July 2025 launch of the “Buy Now” feature and the distinction between “Reclaimed” (restored drill rifles) and “Non-Reclaimed” surplus.** - **Guns Magazine (“M1, M1A1 & M2 Carbines”): Sourced the details on “counterfeit” M1A1 paratrooper stocks and the post-war “Type 3” arsenal upgrades (bayonet lugs and adjustable sights).** - **“We Buy Guns” Valuations: Provided the 2026 price ranges, showing the rise of “Standard” Inlands to the $800–$1,200 range and rare Rock-Ola or Irwin-Pedersen models exceeding $3,000–$10,000.** **Multimedia & Visual Guides** - **Militaria-Deal (“WW2 M1 Carbine Guide”): Used for identifying specific receiver markings and the “Un-Quality” (Union Switch & Signal for Quality Hardware) manufacturing anomalies.** - **YouTube (“Guns You Can’t Live Without”): Referenced for the 2026 “surplus market” outlook regarding ammunition availability and shooter-grade vs. collector-grade value trends.** **Categories:** Additional Weapons --- ### [ATI MOI0300 Mosin Nagant Monte Carlo Stock Upgrade – Black & Woodland Brown](https://www.atioutdoors.com/ati-moi0300-mosin-nagant-monte-carlo-stock-upgrade-black-woodland-brown/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Ultimate Mosin Nagant Upgrade: Modernizing a Legend with the ATI MOI0300 Stock** The Mosin Nagant is more than just a rifle; it is a piece of living history. Originally adopted by the Russian Empire in 1891, this bolt-action powerhouse has survived two World Wars, countless regional conflicts, and over 130 years of service. For many modern shooters, the Mosin Nagant represents an entry point into high-caliber shooting—a rugged, reliable “warhorse” chambered in the formidable 7.62x54mmR. However, while the original wooden stocks carry an undeniable historical charm, they aren’t always the most practical for today’s hunters or target shooters. From “sticky” bolt issues caused by century-old cosmoline to the punishing recoil of a metal buttplate, the traditional setup can be a literal pain to shoot. If you want to transform your vintage surplus rifle into a sleek, functional, and comfortable sporting tool, the ATI Outdoors MOI0300 Monte Carlo Stock is the gold standard for upgrades. **Why the Mosin Nagant Still Dominates in 2026** Despite the proliferation of modern semi-automatic rifles and high-precision chassis systems, the Mosin Nagant remains a staple in the American shooting community. Its longevity is built on three pillars: 1. **Affordability:** Even as surplus prices rise, the Mosin remains one of the most accessible ways to own a high-powered bolt rifle. 2. **Reliability:** Designed to function in the freezing Siberian winter and the mud of the Eastern Front, the Mosin’s action is virtually indestructible. 3. **Versatility:** With the right ammunition, the 7.62x54mmR is a fantastic round for big game hunting, comparable in ballistics to the .30-06 Springfield. To truly unlock that versatility, many owners are choosing to “sporterize” their rifles—replacing the heavy, linear wooden stocks with something built for the 21st century. **Meet the ATI Outdoors MOI0300: The Professional’s Choice** The ATI Outdoors MOI0300 Monte Carlo Stock is specifically engineered to bridge the gap between 19th-century engineering and modern ergonomic standards. This isn’t just a replacement part; it’s a total performance overhaul for your 91/30, M38, or M44 carbine. 1. **Engineered for Durability** The MOI0300 is constructed from DuPont® Extreme Temperature Glass-Reinforced Polymer. Unlike original wood, which can swell in the rain or crack in the heat, this synthetic material is “mar-proof” and weatherproof. Whether you are trekking through a damp forest or shooting in desert heat, the stock remains stable and accurate. 2. **Recoil Reduction and Comfort** Anyone who has spent an afternoon at the range with a stock Mosin knows the “bite” of the original steel buttplate. The ATI Monte Carlo Stock features a thick rubber recoil buttpad that absorbs a significant portion of the felt punch. Combined with the ergonomic raised cheekrest, you’ll find it much easier to maintain a consistent sight picture and stay on target for follow-up shots. 3. **Superior Handling** The stock includes a checkered forearm and grip, providing a secure hold even when wearing gloves or in wet conditions. It also comes equipped with two sling swivel studs, allowing you to attach modern slings or a bipod for steadier long-range shots—something that is difficult to achieve with the original “dog collar” sling mounts. **Aesthetics That Match Your Environment: Color Choices** Performance is paramount, but style matters too. The ATI MOI0300 is available in two distinct finishes to suit your specific needs: - **Matte Black:** The classic choice for a tactical, modern look. The black finish provides a sleek, “all-business” aesthetic that looks great at the range and stays low-profile in the field. - **Woodland Brown:** For those who want to maintain a more traditional “hunting rifle” vibe while enjoying synthetic benefits, Woodland Brown is the perfect middle ground. It blends seamlessly into forest environments, making it a top pick for deer or hog hunters. **A True Drop-In Installation** One of the biggest hurdles for rifle enthusiasts is the fear of permanent modification or complex gunsmithing. The ATI MOI0300 is designed as an easy drop-in installation. For the vast majority of Russian 91/30s and carbines, you can swap the stocks in minutes with basic tools. **Pro Tip:** While most Mosins fit perfectly, some older or Finnish variants may require minor sanding of the polymer for a snug fit due to the slight variations in manufacturing over the last century. **Is It Worth Upgrading Your “Warhorse”?** Purists may argue that a Mosin Nagant should remain in its original configuration. However, with millions of these rifles in circulation, the “standard” 91/30 is the perfect candidate for a project. By installing the ATI MOI0300, you aren’t just changing the look; you are extending the life of the firearm. You’re turning a clunky, heavy infantry rifle into a lightweight, weather-resistant, and shoulder-friendly hunting companion. **Summary of Features:** - **Model:** ATI MOI0300 - **Fitment:** Most 91/30, M38, M44, and T53 variants. - **Material:** Glass-filled nylon (indestructible and weatherproof). - **Color Options:** **Black** and **Woodland Brown**. - **Extras:** Rubber recoil pad, raised cheekrest, and swivel studs. - **Origin:** Proudly Made in the USA. **Take Your Mosin to the Next Level** The Mosin Nagant has already proven it can stand the test of time. Now, it’s time to give it the modern ergonomics it deserves. Whether you are building a budget-friendly deer rifle or a rugged survival tool, the ATI Outdoors MOI0300 Monte Carlo Stock is the most cost-effective and impactful upgrade you can make. **Categories:** Mosin --- ### [Who Is ATI Outdoors? Firearm Stocks & Accessories Explained](https://www.atioutdoors.com/who-is-ati-outdoors-reliable-firearm-stocks-accessories-explained/) **Published:** March 26, 2026 **Author:** John Chvala **Content:** ## **Who Is ATI Outdoors? A Legacy of Innovation in Firearm Accessories** When it comes to upgrading your firearm, reliability, performance, and value matter. That’s where **ATI Outdoors** stands apart. Known for producing high-quality firearm accessories, ATI Outdoors has built a reputation as a trusted name among hunters, sport shooters, and tactical enthusiasts alike. But who exactly is ATI Outdoors—and what makes the brand a go-to choice for firearm upgrades? ## **A Brief Overview of ATI Outdoors** ATI Outdoors, also known as Advanced Technology International, is a U.S.-based manufacturer specializing in **firearm stocks and tactical accessories**. With decades of experience in the industry, the company has focused on delivering innovative solutions that enhance both the functionality and performance of firearms. Headquartered in the United States, ATI Outdoors combines **engineering expertise with real-world application**, creating products designed not just for appearance, but for durability and reliability in demanding conditions. ## **A Focus on Innovation and Design** From the beginning, ATI Outdoors has prioritized innovation. The company was among the early adopters of **advanced polymer technology** in firearm accessories—helping reduce weight while maintaining strength and durability. This commitment to forward-thinking design continues today through: - Adjustable and customizable stock systems - Recoil-reducing technologies - Ergonomic grip designs - Platform-specific upgrades for popular firearms For example, ATI’s **AR-15 stock systems** are engineered for adaptability and performance, offering shooters improved control and customization options. 👉 https://atioutdoors.com/product-category/ar-15-stocks/ Similarly, ATI’s **shotgun stocks and forends** are designed to enhance comfort and reduce felt recoil in demanding conditions. 👉 https://atioutdoors.com/product-category/shotgun-stocks/ Each product is developed with the end user in mind—whether that’s a hunter in rugged terrain or a competitive shooter on the range. ## **Built for Real-World Performance** What sets ATI Outdoors apart is its dedication to real-world performance. It’s not enough for a product to function well in controlled environments—it needs to perform in the field. ATI products are designed to withstand: - Extreme weather conditions - Heavy recoil and repeated use - Rough handling and transport - Dirt, mud, and moisture exposure Products like the **Strikeforce stock lineup** are a prime example of this durability, built to perform under pressure while maintaining comfort and control. 👉 https://atioutdoors.com/?s=strikeforce This focus ensures that shooters and hunters can rely on their gear when it matters most. ## **Serving a Wide Range of Firearm Platforms** ATI Outdoors supports a broad range of firearm platforms, making it easier for users to upgrade their equipment without compatibility concerns. Popular product categories include: - **Rifle stocks** for AR platforms, shotguns, and bolt-action rifles - **Tactical accessories** that improve control, comfort, and usability Explore ATI’s full range of **firearm accessories and upgrades** here: 👉 https://atioutdoors.com/shop/ By offering solutions across multiple platforms, ATI Outdoors provides flexibility for users looking to customize their firearms to meet specific needs. ## **Balancing Performance and Value** One of ATI Outdoors’ defining strengths is its ability to deliver **high-performance firearm accessories at an accessible price point**. While many premium upgrades can be costly, ATI focuses on providing value without compromising on quality. Whether you’re upgrading with a **durable rifle stock** or enhancing ergonomics with tactical components, ATI ensures you get dependable performance without overspending. ## **A Brand Trusted by Shooters and Hunters** Over the years, ATI Outdoors has built a loyal customer base. Its products are widely used across the United States by individuals who demand dependable performance from their equipment. The brand’s reputation is rooted in: - Consistent product quality - Practical, user-focused design - Ongoing innovation - Commitment to customer satisfaction ## **Looking Ahead: The Future of ATI Outdoors** As the firearm industry continues to evolve, ATI Outdoors remains focused on innovation and adaptability. New materials, new technologies, and changing user expectations all play a role in shaping the future of firearm accessories. ATI continues to invest in: - Product development and engineering - Expanded compatibility across platforms - Improved ergonomics and user experience - Advanced manufacturing processes The goal remains the same: to provide shooters and hunters with gear they can trust. ## **Why ATI Outdoors Matters** In a market filled with options, ATI Outdoors stands out by staying true to its core principles—**reliability, innovation, and value**. Whether you’re upgrading your rifle stock or enhancing your firearm’s overall performance, ATI Outdoors offers solutions built for real-world use. --- ### **Upgrade with Confidence** If you’re looking for dependable **firearm accessories and rifle stocks**, ATI Outdoors delivers products designed to perform when it counts. 👉 Browse all ATI Outdoors products: https://atioutdoors.com/shop/ Because when your gear is reliable, your focus stays where it belongs—on the shot ahead. **Categories:** ATI Intel --- ### [M1 Garand Guide 2026: History, Specs, Buying & the Famous Ping](https://www.atioutdoors.com/m1-garand-guide-2026-history-specs-buying-the-famous-ping/) **Published:** March 27, 2026 **Author:** msarver **Content:** The M1 Garand stands as one of the most iconic firearms in American military history. Often called “the greatest battle implement ever devised” by General George S. Patton, this semi-automatic rifle transformed infantry combat during World War II and the Korean War. For collectors, shooters, and history enthusiasts, the M1 Garand remains a legendary piece of engineering that delivers power, reliability, and a distinctive character unmatched by modern alternatives. Whether you’re searching for “M1 Garand history,” “M1 Garand specs,” or wondering “how to buy an M1 Garand” in 2026, this comprehensive guide covers everything you need to know about this .30-06 powerhouse. **The History of the M1 Garand: From Design to Dominance** Canadian-American designer John C. Garand developed the M1 rifle in the 1920s and early 1930s at Springfield Armory. After extensive testing and a caliber debate (initially considering .276 Pedersen before settling on the proven .30-06 Springfield cartridge), the U.S. Army adopted the rifle in 1936 as the first standard-issue semi-automatic service rifle for any major military. Production ramped up dramatically ahead of and during World War II. Springfield Armory and Winchester Repeating Arms were the primary manufacturers during the war, producing millions of rifles. Post-war, International Harvester and Harrington & Richardson joined production between 1953 and 1956 to replenish stocks for the Korean War. In total, over 5.4 million M1 Garands were manufactured in the United States between 1937 and 1957. The rifle gave American soldiers a massive firepower advantage over enemies armed with bolt-action rifles like the German Karabiner 98k, Japanese Arisaka, or Italian Carcano. While opponents manually cycled each round, GIs could deliver 40-50 rounds per minute with accurate, rapid semi-automatic fire. This edge proved decisive in theaters from North Africa and Europe to the Pacific islands like Guadalcanal, Iwo Jima, and Okinawa. In the Korean War (1950-1953), the M1 Garand again served as the primary infantry rifle. It performed reliably in harsh conditions, though extreme cold sometimes caused issues with lubricants, leading to refined maintenance procedures. Sniper variants, such as the M1C and M1D, provided precision fire support with mounted scopes. The M1 remained in U.S. service until 1958, when it was replaced by the M14. Many surplus rifles later found their way to allied nations or civilian markets through programs like the Civilian Marksmanship Program (CMP). **M1 Garand Specifications and Design Features** The M1 Garand is a gas-operated, rotating-bolt, semi-automatic rifle chambered in the powerful .30-06 Springfield cartridge. Here are the key specs: - **Caliber**: .30-06 Springfield - **Action**: Gas-operated, rotating bolt - **Barrel Length**: 24 inches - **Overall Length**: Approximately 43 inches - **Weight**: 9.5 to 11.6 pounds (depending on configuration and accessories) - **Magazine**: 8-round en bloc clip (internal, non-detachable) - **Effective Range**: 500 yards (457 meters) for area targets; highly accurate to 300-400 yards in skilled hands - **Sights**: Adjustable rear aperture sight with protective wings on the front post - **Rate of Fire**: 40–50 rounds per minute (practical) The rifle uses an en bloc clip that holds eight rounds. When the last round fires, the clip ejects upward with a signature metallic “ping” sound as the bolt slams forward—an iconic audio cue forever associated with the Garand. The gas system taps gas from the barrel to cycle the action, providing smooth operation once properly maintained. One common question is “M1 Garand vs M1A” or “M1 Garand vs AR-15.” The Garand offers superior stopping power and ballistics compared to the 5.56mm AR-15, with the .30-06 delivering significant energy at longer ranges. The M1A (civilian M14 variant) shares DNA with the Garand but features a detachable 20-round box magazine and is generally easier to mount optics on. However, many enthusiasts prefer the Garand’s balance, historical authenticity, and that unmistakable “ping.” **The Famous “Ping” Myth: Fact or Fiction?** No discussion of the M1 Garand is complete without addressing the “ping” myth. Popular culture suggests the ejected en bloc clip’s metallic sound alerted enemies that a soldier was out of ammunition, making them vulnerable during reload. In reality, this is largely a myth. Battlefields are chaotic with gunfire, explosions, shouts, and movement. The ping is relatively quiet compared to the roar of combat, and soldiers rarely fought in isolation. Reloading with a new clip takes only seconds for a trained shooter. There is no documented historical evidence of American soldiers being killed specifically because of the clip ejection sound. It’s a fun legend, but experts and veterans largely debunk it as overstated. **Accuracy, Performance, and Shooting the M1 Garand** The **M1 Garand** earns praise for its inherent accuracy. With match-grade ammunition and a well-maintained rifle, shooters routinely achieve 2-4 MOA groups at 100 yards—impressive for a battle rifle designed in the 1930s. The adjustable sights allow precise zeroing, and the rifle’s weight helps tame recoil from the potent .30-06 round. Modern commercial .30-06 ammo or surplus military ball works well, though many recommend avoiding extremely light or heavy loads to ensure reliable gas system function. “Garand thumb” (pinching your thumb while loading clips) is a rite of passage for new shooters—load from the top carefully! For competition, the Garand shines in high-power rifle matches like those at Camp Perry. Its balance and sights make it a joy for prone or offhand shooting. **Variants and Collectibility** Key M1 Garand variants include: - **Standard Infantry Model**: The most common. - **M1C and M1D Sniper Rifles**: Equipped with scope mounts and cheek pads for designated marksmen. - **Gas Trap (early/pre-war) models**: Rare early versions with different gas systems, highly prized by collectors. - Manufacturer-specific rifles from Springfield, Winchester, International Harvester (IHC), and Harrington & Richardson (H&R). Collecting focuses on original parts, matching serial numbers, inspector cartouches, and condition. “All-correct” WWII examples command premium prices. Post-war rebuilds with mixed parts offer affordable entry points for shooters. **How to Buy and Maintain an M1 Garand in 2026** The Civilian Marksmanship Program (CMP) remains one of the best sources for authentic, graded M1 Garands (Service Grade, Field Grade, etc.). They often sell rifles built from surplus and new commercial components, with new production options emerging. Private sales, auctions, and gun shops offer additional opportunities, but always verify legality in your state. **Maintenance tips**: - Field-strip easily for cleaning—remove the trigger group, gas cylinder, and operating rod. - Keep the gas system and oprod clean and lightly lubricated. - Check headspace and barrel condition (throat erosion and muzzle wear gauges are useful). - Use proper .30-06 ammo to avoid over-gassing or cycling issues. With basic care, these rifles can last generations. **Why the M1 Garand Endures Today** More than 80 years after its adoption, the M1 Garand continues to captivate. It symbolizes American industrial might and the shift from bolt-action to semi-automatic warfare. For many, owning one connects them to the Greatest Generation’s sacrifice and ingenuity. Whether you’re a history buff reliving WWII battles, a competitive shooter chasing matches, or a collector preserving a piece of heritage, the M1 Garand delivers unmatched satisfaction. Its rugged reliability, powerful cartridge, and that unforgettable ping make it a bucket-list firearm for any enthusiast. Ready to experience the legend? Research CMP offerings or local options, take a safe firearms handling course if you’re new to the platform, and join communities like the Garand Collectors Association or online forums for tips. The M1 Garand isn’t just a rifle—it’s living history you can hold and shoot. **Sources:** **Production, History, and Manufacturers** - **National Park Service (Springfield Armory): Detailed U.S. M1 Garand Rifle Production serial numbers and timelines.** - **Scott Duff (M1 Garand expert): Comprehensive data on who made M1 Garands and total production figures (over 5.4 million rifles).** - **Wikipedia M1 Garand entry: Overview of design, adoption (1936), service history (WWII and Korean War), specifications, and variants.** - **American Rifleman articles on rebuilds, history, and markings.** **Specifications and Design** - **Civilian Marksmanship Program (CMP) official pages: Current M1 Garand sales, grading criteria, manufacturers (Springfield, Winchester, H&R, IHC), and new commercial production updates.** - **Wikipedia and technical references: Caliber (.30-06 Springfield), action (gas-operated, rotating bolt), dimensions (24″ barrel, ~43″ overall, 9.5–11.6 lbs), 8-round en bloc clip, sights, and effective range.** **The “Ping” Myth** - **Armament Research Services (Jonathan Ferguson): In-depth analysis debunking the idea that the en bloc clip ejection sound endangered soldiers, citing battlefield noise and lack of evidence.** - **American Rifleman and The Armory Life: Discussions of the myth, veteran perspectives, and why it is largely overstated or implausible.** - **Various expert videos and articles (e.g., Forgotten Weapons, Bloke on the Range) confirming no documented cases of casualties directly resulting from the ping.** **Variants (Including Sniper and Gas Trap)** - **Wikipedia: Details on M1C and M1D sniper variants, production numbers, and scope mounts.** - **American Rifleman and Forgotten Weapons: Coverage of early “gas trap” models (pre-gas port design), their rarity, and conversion history.** **Accuracy and Shooting Performance** - **Pew Pew Tactical M1 Garand review: Real-world accuracy testing (typically 2–4 MOA with good ammo), recoil management, and comparison notes.** - **Forum discussions and articles (e.g., Sniper’s Hide, Guns.com): Typical groups of 2–4 MOA at 100 yards for well-maintained rifles, military accuracy standards, and competition use.** **Buying and Maintenance (2026 Context)** - **Civilian Marksmanship Program (CMP) website: Eligibility, grading (Service Grade, Field Grade, etc.), sales process, and information on surplus vs. new commercial M1 Garands.** - **General maintenance knowledge drawn from standard field-stripping procedures, gas system care, and ammo recommendations consistent with CMP and collector guidance.** **Categories:** Additional Weapons --- ### [Mosin-Nagant: History, Variants & Buying Guide (M91/30, M44, Finnish M39)](https://www.atioutdoors.com/mosin-nagant-history-variants-buying-guide-m91-30-m44-finnish-m39/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Mosin-Nagant: A Century of Bolt-Action Dominance** For over 130 years, the Mosin-Nagant has occupied a unique space in the world of firearms. It is a rifle defined by its rugged simplicity, a staggering production history, and an uncanny ability to stay relevant long after its peers have been retired to museums. Whether you are a history buff, a budget-conscious target shooter, or a collector of military surplus, the “Mosin” is a rite of passage. In this guide, we’ll explore the history, variants, and enduring legacy of one of the most produced bolt-action rifles in human history. **The Birth of a Legend: 1891 to the Great War** The story of the Mosin rifle begins in the late 19th century. Following a bruising defeat in the Russo-Ottoman War, the Russian Empire realized its single-shot Berdan rifles were obsolete. They needed a repeating firearm that could withstand the brutal conditions of the Russian winter and the lack of technical training among its conscripted peasantry. The resulting design was a compromise between two inventors: Sergei Ivanovich Mosin, a Russian captain, and Léon Nagant, a Belgian designer. Adopted in 1891, the rifle featured a five-round internal magazine and was chambered in the now-legendary 7.62x54mmR—a rimmed cartridge that remains in active military service to this day. **Key Variants: Which Mosin is Which?** While there are dozens of minor variations, most collectors focus on a few primary models: - **M1891:** The original long rifle. These are increasingly rare and recognizable by their extreme length and sling swivel “slots” rather than modern mounts. - **M91/30:** The most common variant. Produced in the tens of millions, this was the standard-issue rifle for the Red Army during World War II. It features a shorter barrel than the M1891 and hooded front sights. - **M38 Carbine:** A shorter, handier version designed for rear-echelon troops and engineers. It does not have a bayonet lug. - **M44 Carbine:** Similar to the M38 but features a side-folding integral bayonet. These are known for their significant recoil and impressive “fireball” when shot. - **Finnish M27, M28, and M39:** During the Winter War and Continuation War, Finland captured Russian Mosins and rebuilt them with superior barrels, triggers, and stocks. The **Finnish M39** is widely considered the finest Mosin-Nagant ever made. **Why the Mosin-Nagant Remains Popular** Why does a rifle designed in the 1890s still have a massive following in 2026? It boils down to three factors: **Reliability, Affordability, and Ballistics.** 1. **“Russian Tough” Reliability** The Mosin was designed for a soldier who might have never seen a machine before. The bolt consists of only seven parts. It can be stripped, cleaned, and reassembled in minutes without specialized tools. It functions in sub-zero temperatures and through thick mud—environments that would jam more delicate actions. 2. **The Power of the 7.62x54mmR** Ballistically, the 7.62x54mmR is comparable to the .30-06 Springfield or the .308 Winchester. It is more than capable of taking down large game or hitting targets at 500+ yards. While surplus “spam cans” of ammunition have increased in price over the last decade, it remains one of the most cost-effective full-power rifle cartridges on the market. 3. **A Piece of Living History** When you hold a 1943-stamped Tula or Izhevsk M91/30, you aren’t just holding a tool; you’re holding a relic of the Battle of Stalingrad. For many, the Mosin is an entry point into historical collecting. **Sniper Variations and the “Enemy at the Gates” Effect** The Mosin-Nagant gained cinematic fame through the exploits of snipers like **Vasily Zaytsev**. The PU Sniper variant, equipped with a 3.5x magnification scope, was a formidable tool in the hands of Soviet marksmen and markswomen. Today, authentic PU snipers are highly sought after by collectors. However, buyers should be wary of “ex-snipers” (rifles that were once snipers but had their scopes removed) or modern reproductions sold as originals. **Performance: What to Expect at the Range** If you’re planning to take a Mosin to the range, manage your expectations. These were mass-produced battle rifles, not precision instruments. - **Accuracy:** A standard M91/30 typically shoots between 2 and 4 MOA (Minutes of Angle). Finnish variants can often achieve 1 to 1.5 MOA with quality ammunition. - **Recoil:** The Mosin is known for its “kick.” The steel buttplate offers no cushioning, so a slip-on rubber recoil pad is a popular aftermarket addition for long range sessions. - **“Sticky Bolt”:** A common issue where the bolt becomes difficult to open after firing. This is usually caused by dried cosmoline (a packing grease) left in the chamber. A thorough scrubbing with a brass brush and solvent usually fixes the problem. **Maintenance and Care** If you purchase a surplus Mosin, it will likely arrive coated in **cosmoline**. This brown, wax-like substance preserves the metal but must be removed before firing. Mineral spirits or heat are the most effective ways to clean the rifle. **Crucial Note:** Much of the surplus 7.62x54mmR ammunition uses **corrosive primers**. If you shoot surplus ammo, you must clean your barrel immediately after your range trip (usually with water or a specialized solvent) to prevent rust from eating away at the rifling. **Final Thoughts** The Mosin-Nagant is the “people’s rifle.” It isn’t the most refined bolt-action, nor is it the most ergonomic. But it is honest. It represents a pivot point in world history and offers a shooting experience that is visceral, loud, and undeniably fun. Whether you want to preserve it in its original military configuration or use it as a rugged “truck gun,” the Mosin-Nagant remains a titan of the firearms world. **Categories:** Mosin --- ### [Taurus Judge Review: .45 Colt & .410 Revolver for Self-Defense & Outdoors + ATI X2 Grip Upgrade](https://www.atioutdoors.com/taurus-judge-review-45-colt-410-revolver-for-self-defense-outdoors-ati-x2-grip-upgrade/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Taurus Judge Handgun: The Ultimate Versatile Revolver for Self-Defense and Outdoor Adventures** In the world of firearms, few handguns capture attention like the Taurus Judge handgun. This innovative revolver stands out for its ability to fire both .45 Colt rounds and .410 shotshells from the same cylinder—no swaps required. Whether you’re a home-defense enthusiast, an outdoor adventurer battling snakes in the field, or a range shooter seeking something truly unique, the Taurus Judge revolver delivers unmatched versatility in a compact package. Since its debut in 2006, it has earned a loyal following among shooters who want stopping power without sacrificing flexibility. If you’re searching for a “Taurus Judge review,” “Taurus Judge .45 Colt / .410 revolver,” or the “best multi-caliber handgun,” you’re in the right place. In this comprehensive guide, we’ll break down its history, key specifications, real-world performance, pros and cons, and practical upgrades—including the game-changing ATI Outdoors Product PN: A.4.10.1015 grip. **A Brief History of the Taurus Judge Revolver** Taurus introduced the Judge in response to a growing need for a versatile sidearm. The name “Judge” originated from a Miami judge who carried a similar custom revolver to handle courtroom threats and snakes in Florida’s Everglades. Taurus took the concept mainstream, chambering it for .45 Colt and 2½-inch .410 shotshells. The rifled barrel ensures it’s legally classified as a handgun, not a short-barreled shotgun, making it accessible to anyone who can legally own a firearm. Over the years, Taurus expanded the lineup. Standard models feature 3-inch barrels, while the Public Defender offers a more concealable 2½-inch option. The Raging Judge adds .454 Casull capability for even more power. Newer Executive Grade and T.O.R.O. (Taurus Optics Ready Option) variants include upgraded triggers, premium finishes, and red-dot compatibility. Today, the Taurus Judge handgun remains one of Taurus’s best-selling revolvers, proving its staying power in a competitive market. **Key Features and Specifications of the Taurus Judge Handgun** Most Taurus Judge revolvers are built on a medium-frame steel or alloy chassis with a double-action/single-action (DA/SA) trigger. Here’s what you can expect from a typical 3-inch model: - **Caliber**: .45 Colt and .410 bore (2½-inch or 3-inch chambers in select models) - **Capacity**: 5 rounds - **Barrel Length**: 3 inches (common) or up to 6½ inches on longer variants - **Overall Length**: Approximately 9.5 inches - **Weight**: 29–37 ounces unloaded, depending on finish and chamber length - **Sights**: Fiber-optic front and fixed rear notch (Executive models offer brass-bead upgrades) - **Grips**: Factory Ribber or rubber with finger grooves - **Finish Options**: Matte black oxide, stainless steel, or camo patterns The elongated cylinder is the standout feature—it accommodates both pistol rounds for precision and shotgun shells for devastating close-range spread. With .410 shotshells loaded with buckshot or slugs, the Judge excels at 7–15 yards, while .45 Colt delivers reliable power out to 25+ yards. Modern variants like the Judge Home Defender add a longer 13-inch barrel and blast shields for supported shooting, while the T.O.R.O. models come optics-ready straight from the factory. **Real-World Performance: Why Shooters Love the Taurus Judge** On the range, the Taurus Judge revolver feels like a hybrid of pistol and shotgun. Load it with .45 Colt for target practice or defensive carry—expect manageable recoil and good accuracy for a revolver. Switch to .410 shotshells (especially 3-inch loads in compatible models) and you get a devastating pattern at self-defense distances. Many owners call it the ultimate “snake gun” or truck gun for rural areas. Recoil is noticeable with full-power .410 loads, but the revolver’s weight helps tame it. The DA trigger pull is long but smooth on newer models, while the SA let-off is crisp. Shooters praise its reliability in dirty conditions—typical of a well-made revolver. **Pros and Cons of the Taurus Judge Handgun** **Pros**: - Unparalleled ammo versatility - Excellent close-range stopping power - Simple, reliable revolver mechanics - Legal in all 50 states as a standard handgun - Fun factor—great for plinking or showing off at the range **Cons**: - Heavy and bulky for everyday concealed carry - Limited 5-round capacity - Noticeable recoil with shotshells - DA trigger can feel heavy for some users - Shotshell patterns open quickly beyond 10–15 yards Despite the drawbacks, the Taurus Judge excels where most handguns fall short: delivering shotgun-like performance in a revolver format. **Upgrading Your Taurus Judge: The ATI Outdoors X2 Grip Option** Factory grips work fine for casual shooting, but serious users quickly seek better ergonomics and recoil control. Enter the perfect upgrade: ATI Outdoors Product PN: A.4.10.1015—the X2 Taurus Large Frame Grip (also known as the Scorpion Grip). This affordable aftermarket grip is purpose-built for large-frame Taurus revolvers, including the Judge (note: it does not fit poly-frame or Public Defender models). Key benefits include: - Sure Grip texture that stays secure wet or dry - Built-in X Series backstrap that cushions the web of your thumb and eliminates recoil “punch” - 1911-inspired rear tang and curved base for consistent hand placement and reduced muzzle flip - Finger elevation contour that naturally guides your trigger finger - Single-screw installation—takes minutes Users report the grip transforms the Judge into a completely different firearm. Recoil is noticeably softer, muzzle rise drops dramatically, and control improves even with hot .410 loads. Large-handed shooters love the fuller grip profile without sacrificing concealability. With a 4.64/5-star rating across dozens of reviews, the ATI X2 grip is one of the highest-rated Judge upgrades available. If you own a Taurus Judge handgun, swapping in the ATI Outdoors PN: A.4.10.1015 is one of the smartest, most cost-effective modifications you can make. **Who Should Buy a Taurus Judge Revolver?** The Judge shines for home defense, vehicle carry, farm or ranch use, and anyone who wants one gun that handles multiple threats. It’s not ideal for competitive target shooting or long-range work, but for practical, real-world scenarios, few handguns match its flexibility. **Final Thoughts on the Taurus Judge Handgun** The Taurus Judge revolver continues to prove why versatility wins. Its ability to chamber both .45 Colt and .410 shotshells in a reliable DA/SA package makes it a true standout in the handgun world. Whether you’re defending your home, protecting livestock, or simply enjoying a unique range session, the Judge delivers. Ready to take yours to the next level? Pair it with the ATI Outdoors Product PN: A.4.10.1015 X2 Large Frame Grip and experience the difference recoil reduction and superior ergonomics can make. Check your local dealer for the latest Taurus Judge models and accessories today. **Categories:** Handguns --- ### [Mauser 98: Complete Guide to History, Design & Legacy of the Gewehr 98](https://www.atioutdoors.com/mauser-98-complete-guide-to-history-design-legacy-of-the-gewehr-98/) **Published:** March 27, 2026 **Author:** msarver **Content:** # Mauser 98: The Complete Guide to History, Design, and Legacy Few firearms in history have left a mark as enduring as the Mauser 98. Introduced at the turn of the 20th century, the Mauser Model 98 — commonly known as the Gewehr 98 or simply the 98 Mauser — became the gold standard of bolt-action rifle design. From the trenches of World War I to the hunting fields of the modern era, the Mauser 98 action has proven itself reliable, accurate, and remarkably influential. Whether you’re a firearms historian, a collector, or a hunter looking for a classic platform, understanding the Mauser 98 is essential. ## What Is the Mauser 98? The Mauser 98, officially designated the Gewehr 98, is a bolt-action rifle developed by Mauser, the legendary German arms manufacturer. It was officially adopted by the German Imperial Army in 1898, giving the rifle its enduring name. Chambered originally in 7.92x57mm Mauser (also known as 8mm Mauser), the rifle introduced a controlled-round-feed bolt action that became one of the most copied and admired designs in firearms history. The Mauser 98 action — characterized by its twin-lug locking system, claw extractor, and internal magazine — set the mechanical blueprint that most modern bolt-action rifles still follow today. ## A Brief History of the Mauser 98 The story of the Mauser 98 begins with brothers Wilhelm and Paul Mauser, whose work in the late 19th century continuously pushed the limits of rifle design. The Model 98 was the culmination of several earlier Mauser designs — including the Model 1871, the Model 93, and the Model 96 — each improving on the last. When Germany adopted the Gewehr 98 in 1898, it quickly became the backbone of the Imperial German infantry. The rifle saw widespread use in World War I, and a shorter variant — the Karabiner 98k (Kar98k) — became the standard German service rifle of World War II. The Kar98k is perhaps the most produced variant, with millions manufactured between 1935 and 1945. Today, original Mauser 98 and Kar98k rifles are among the most sought-after pieces in military surplus and antique firearms collecting. ## The Mauser 98 Action: Engineering Excellence What truly sets the Mauser 98 apart is its action — the mechanical heart of the rifle. The Mauser 98 bolt-action is celebrated for several key engineering features: - **Controlled-Round Feed (CRF):** The claw extractor grips the cartridge rim immediately upon feeding from the magazine, ensuring reliable extraction in virtually all conditions — a critical advantage in combat and hunting scenarios. - **Twin Locking Lugs:** Located at the front of the bolt, these provide an exceptionally strong and rigid lock-up, contributing to the rifle’s legendary accuracy and strength. - **Three-Position Safety:** A wing-type safety at the rear of the bolt offers three positions — fire, intermediate (bolt can be manipulated, action safe), and full safe — making the Mauser 98 one of the most practical rifle designs for hunters and soldiers alike. - **Internal Box Magazine:** The staggered 5-round internal magazine, loaded via stripper clips, kept the profile sleek while offering adequate capacity for military and sporting use. These features combined to create an action so mechanically sound that gunsmiths and manufacturers worldwide began copying, licensing, and adapting it. Companies like Winchester, Remington, and Ruger all based landmark bolt-action designs on principles pioneered by the Mauser 98. ## Mauser 98 Variants and Derivatives Over its long production life, the Mauser 98 spawned numerous variants for different military and commercial markets. Some of the most notable include: - **Karabiner 98k (Kar98k):** The most prolific variant, this shortened carbine was the primary German infantry rifle of World War II. - **VZ 24:** A Czechoslovakian variant widely exported to multiple countries during the interwar period. - **Yugo M48:** A Yugoslav post-war Mauser 98 variant, prized among collectors for its often-excellent condition and affordable pricing. - **Commercial Sporting Mausers:** Many manufacturers, including Mauser itself, built high-grade sporting rifles on the 98 action, chambered in calibers ranging from .243 Winchester to .375 H&H Magnum. ## The Mauser 98 in Hunting and Sport Shooting Beyond its military legacy, the Mauser 98 action became the foundation for the modern hunting rifle. Custom gunsmith builds on surplus 98 Mauser actions were incredibly popular throughout the mid-20th century, and that tradition continues today. The controlled-round-feed design is especially prized by hunters pursuing dangerous game in Africa and Alaska, where reliable ejection under pressure can be a matter of safety. Chambered in big-bore calibers, a Mauser 98-actioned rifle remains a trusted companion for professional hunters and guides worldwide. ## Collecting the Mauser 98: What You Need to Know The Mauser 98 and its variants are among the most popular collectible military rifles available today. When collecting a Mauser 98 or Kar98k, look for matching numbers (bolt, receiver, stock, and barrel all share the same serial number), visible proof marks, and original finish. Rifles with clear manufacturer codes — such as “byf” for Mauser-Werke production — and wartime date stamps are particularly desirable. Condition grading ranges from “unissued” examples with nearly perfect wood and metal to well-worn battlefield pickups. Original Kar98k rifles in excellent condition can command prices from $1,000 to well over $3,000 at auction, while commercial sporters and foreign variants are generally more affordable entry points for new collectors. ## The Lasting Legacy of the Mauser 98 More than 125 years after its adoption, the Mauser 98 remains a benchmark of bolt-action rifle design. Its controlled-round-feed action, three-position safety, and robust twin-lug lockup have been replicated by virtually every major rifle manufacturer in the world. Rifles like the Winchester Model 70, the Ruger M77, and the Weatherby Mark V all owe a significant debt to Paul Mauser’s masterwork. For historians, collectors, hunters, and shooting enthusiasts alike, the Mauser 98 is not merely a historical artifact — it is a living standard against which all bolt-action rifles are measured. ## Conclusion The Mauser 98 is more than a rifle — it is a milestone in mechanical engineering and military history. From the trenches of World War I and the battlefields of World War II to the hunting fields of today, the Mauser Model 98 has proven its worth across generations and continents. Whether you are researching the Gewehr 98 for historical study, seeking a Kar98k for your collection, or hunting for a custom-built sporting Mauser, understanding this iconic platform deepens your appreciation for everything that followed. The Mauser 98 action set the standard — and over a century later, that standard has never been surpassed. **Categories:** Mauser --- ### [ATI MSS1500 Mauser 98 Stock | Drop-In Scout Rifle Conversion](https://www.atioutdoors.com/ati-mss1500-mauser-98-stock-drop-in-scout-rifle-conversion/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Mauser 98: A Bolt-Action Legend Reborn with the ATI Outdoors MSS1500** Few firearms carry the weight of history quite like the Mauser Gewehr 98. Developed by Paul Mauser at the end of the 19th century, this rifle became the gold standard for bolt-action design, influencing almost every modern hunting rifle that followed. Even today, the “98” remains a symbol of reliability, precision, and over-engineered excellence. However, for many owners of surplus Mauser rifles, the original military configuration can be cumbersome for modern hunting or competitive shooting. If you want to modernize your classic without permanent, expensive gunsmithing, the ATI Outdoors MSS1500 Mauser 98 Stock is the ultimate solution, transforming a vintage warhorse into a sleek, high-performance “Scout Rifle.” **The Anatomy of a Legend: Why the Mauser 98 Endures** The Mauser 98 was officially adopted in 1898 and introduced several revolutionary features that are still prized by shooters today: - **Controlled Round Feeding (CRF):** The massive non-rotating claw extractor ensures the cartridge is under control from the magazine to the chamber, virtually eliminating “double-feeding” under stress. - **The Third Locking Lug:** A safety lug at the rear of the bolt prevents the bolt from moving backward in the rare event of a primary lug failure. - **Gas Relief System:** Engineered to channel high-pressure gas away from the shooter’s face during a case rupture. These features made the Mauser 98 the most successful military bolt-action in history. But while the action is legendary, the original wood stocks and iron sights can be a limitation for the modern marksman. **Modernize Your Mauser: The MSS1500 Transformation** The ATI Outdoors MSS1500 isn’t just an accessory; it’s a complete ergonomic overhaul for your Large Ring Mauser 98. It bridges the gap between 1898 craftsmanship and 21st-century tactical requirements. 1. **Integrated Scout-Style Scope Mount** The most innovative feature of the MSS1500 is the **built-in Weaver rail**. Instead of drilling and tapping your historic receiver—which can decrease the rifle’s value—this stock provides a stable platform for mounting a scout-style scope. This allows for rapid target acquisition and long-range accuracy while keeping the rifle’s action clear. 2. **Advanced Recoil Management** Vintage Mausers, especially those chambered in 8mm Mauser or .30-06, are known for their “kick.” The MSS1500 addresses this with the **X Series Recoil Pad**. This non-slip, impact-absorbing pad minimizes muzzle lift and eliminates the “felt punch” of the recoil, making it comfortable for shooters of all experience levels to enjoy a full day at the range. 3. **Rugged, All-Weather Construction** Original wood stocks are susceptible to warping and cracking in extreme weather. The MSS1500 is manufactured in the USA from **DuPont® Extreme Temperature Glass-Reinforced Polymer**. **Aesthetic Versatility: Black or Woodland Brown** While performance is the primary driver for any upgrade, ATI Outdoors understands that a “Range Buddy” should look the part, too. The MSS1500 is available in two distinct color options to suit your personal style or hunting environment. You can opt for the classic, tactical Black for a sleek and modern look, or choose the Woodland Brown finish. The Woodland Brown option is particularly popular for hunters, as it provides a natural, earthy tone that blends seamlessly into timber and brush while maintaining the indestructible benefits of polymer over traditional wood. Whether you are building a modern mountain rifle or a tactical scout, these color choices ensure your Mauser stands out—or blends in—exactly how you want it to. **Effortless “Drop-In” Installation** One of the biggest hurdles for Mauser enthusiasts is the cost of professional gunsmithing. The MSS1500 is designed for easy drop-in installation. It fits most Large-Ring Mauser 98 models, including: - German K-98 - Czech VZ-24 - Yugo 48/48a - Turkish Models 1903/1937/1938/1946 *Note: For rifles with straight or “wide-arc” bolts, simply pair this stock with the ATI Bolt Handle (#MBH1800) to ensure proper clearance for your new optics.* **Why the Mauser 98 Still Wins in 2026** In a market filled with “disposable” budget rifles, a Mauser 98 action in an ATI Outdoors MSS1500 stock is a tank. You get a battle-proven, indestructible action combined with modern ergonomics and optics capability. It’s a reloader’s dream and a hunter’s most reliable companion. By upgrading to the MSS1500, you aren’t just changing a stock; you’re unlocking the true accuracy potential of your rifle. You get to keep the spirit of a classic firearm while gaining the tactical advantages of modern material science. **Conclusion: Give Your Mauser a Second Life** Don’t let your historic Mauser gather dust because it’s too heavy or hard to aim. The ATI Outdoors MSS1500 allows you to respect the past while equipping your rifle for the future. Whether you’re heading to the treestand or the long-distance range, this stock ensures your Mauser is ready for the task. **Categories:** Mauser --- ### [The Mossberg 500 Shotgun: America’s Most Popular Pump-Action Shotgun](https://www.atioutdoors.com/the-mossberg-500-shotgun-americas-most-popular-pump-action-shotgun/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Mossberg 500 Shotgun: America’s Most Popular Pump-Action Shotgun** The Mossberg 500 shotgun is one of the most iconic and versatile firearms ever made. Since its introduction in 1961, this pump-action shotgun has become the best-selling shotgun of all time, with over 12 million units sold worldwide. Its combination of reliability, affordability, and incredible adaptability makes the Mossberg 500 a top choice for hunters, homeowners, and tactical shooters alike. Whether you need a dependable field gun for hunting, a rugged home defense weapon, or a customizable platform for the range, the Mossberg 500 delivers proven performance without breaking the bank. **A Brief History of the Mossberg 500** O.F. Mossberg & Sons introduced the Mossberg 500 in 1961 as an affordable, no-nonsense pump-action shotgun. The company, founded in 1919 by Swedish immigrant Oscar Mossberg, had built a reputation for making reliable and budget-friendly firearms. The Mossberg 500 was designed to be simple, durable, and accessible to everyday shooters. Over the years, the Mossberg 500 evolved into a true modular shooting system. Interchangeable barrels allowed one receiver to serve multiple purposes — from bird hunting to deer hunting to home protection. The addition of dual action bars improved smoothness and reliability. The platform even proved its toughness by passing strict military testing standards, cementing its reputation as a workhorse shotgun. Today, the Mossberg 500 remains in full production with modern updates including synthetic stocks, tactical configurations, classic Retrograde models with walnut furniture, and the innovative FLEX system that lets users swap stocks and barrels in seconds without tools. **Key Features and Specifications of the Mossberg 500** The Mossberg 500 stands out for its rugged yet user-friendly design: - **Action**: Smooth pump-action with twin action bars for reliable cycling. - **Receiver**: Lightweight anodized aluminum with a steel-to-steel bolt lockup. - **Safety**: Ambidextrous top-mounted tang safety, easy to operate for both right- and left-handed shooters. - **Chambering**: Most models handle both 2¾-inch and 3-inch shells in 12 gauge, 20 gauge, or .410 bore. - **Capacity**: Standard 5+1 (six rounds total); many tactical models offer extended capacity. - **Barrel Lengths**: Available from short 18.5-inch tactical barrels to longer 28-inch field barrels. - **Weight**: Typically 7 to 7.75 pounds, making it easy to carry in the field. - **Sights**: Bead, ghost ring, or rifle sights depending on the model; many are drilled and tapped for optics. - **Chokes**: Interchangeable Accu-Choke system on most field models. The shotgun features an anti-jam elevator, dual extractors, and quick takedown for easy cleaning. Its modular design lets owners quickly change barrels to match different shooting needs. **Popular Mossberg 500 Variants** The Mossberg 500 lineup offers options for every shooter: - **Field and All-Purpose Models**: Equipped with 26- or 28-inch vent-rib barrels and interchangeable chokes — perfect for upland birds, waterfowl, and sporting clays. - **Tactical and Security Models**: Short 18.5- or 20-inch barrels, synthetic stocks, and options for pistol grips or extended magazines. These are popular choices for home defense. - **Slugster Models**: Rifled barrels with rifle sights designed specifically for deer hunting with slugs. - **Retrograde Series**: Classic walnut stocks and forends that give the gun a timeless look. - **FLEX System**: Tool-free interchangeable stocks and barrels for maximum versatility. - **Youth and Specialty Models**: Includes Bantam versions for smaller shooters, turkey-specific setups, and corrosion-resistant Mariner models. **Best Uses for the Mossberg 500 Shotgun** Few firearms are as adaptable as the Mossberg 500: **Home Defense** A 12-gauge Mossberg 500 with an 18.5-inch barrel loaded with buckshot provides excellent stopping power with manageable recoil. The distinctive sound of racking the pump alone can deter intruders. Many owners add weapon lights, side saddles, or upgraded stocks for better ergonomics. **Hunting** The Mossberg 500 excels in the field. Longer barrels with chokes work great for birds and waterfowl, while rifled Slugster models perform well for deer. Its lightweight design helps reduce fatigue during long days in the woods. **Recreational Shooting** Affordable and fun on the range, the 500 is excellent for sporting clays, trap, and general plinking. The wide availability of aftermarket parts makes it easy to customize with better sights, recoil pads, or modern furniture. **Pros and Cons of the Mossberg 500** **Pros:** - Outstanding value for the money - Highly versatile with interchangeable barrels - Proven reliability in all conditions - Easy to maintain and customize - Ambidextrous safety - Huge aftermarket support **Cons:** - Recoil can feel stout in 12-gauge with heavy loads (lighter 20-gauge models help) - Basic polymer trigger group on some models (easy to upgrade) - May need occasional cleaning to run perfectly with very light target loads Overall, the Mossberg 500 is incredibly dependable. Most owners report years of trouble-free use with basic maintenance. **Why the Mossberg 500 Remains a Top Choice** In 2026, the Mossberg 500 continues to dominate the pump-action shotgun market thanks to its unbeatable combination of simplicity, durability, and affordability. New models and finishes keep the platform fresh while staying true to its core strengths. Whether you’re a first-time shotgun buyer, an experienced hunter, or someone looking for reliable home protection, the Mossberg 500 offers exceptional performance at a price that makes sense. With models typically ranging from $400 to $600, it delivers more versatility than many more expensive competitors. If you’re shopping for a do-it-all shotgun, the Mossberg 500 deserves a serious look. Consider starting with a combo model to get the most flexibility right out of the box. Always follow safe firearm handling practices, complete proper training, and check all local laws and regulations. The Mossberg 500 isn’t just a shotgun — it’s a trusted American classic that continues to prove why it’s the best-selling pump-action of all time. **Categories:** Mossberg --- ### [The Ultimate Winchester SXP Guide: Is This the World’s Fastest Pump Shotgun?](https://www.atioutdoors.com/the-ultimate-winchester-sxp-guide-is-this-the-worlds-fastest-pump-shotgun/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Ultimate Winchester SXP Guide: Is This the World’s Fastest Pump Shotgun?** In the world of firearms, few names carry as much weight as Winchester. While semi-automatic shotguns often steal the spotlight in modern waterfowl and clay shooting circles, the pump-action shotgun remains the gold standard for reliability, simplicity, and raw utility. Leading that pack is the Winchester SXP (Super X Pump). Renowned for being the “fastest pump action in the world,” the SXP is the spiritual successor to the legendary Model 1300. Whether you are a first-time buyer looking for a home defense tool or a seasoned hunter needing a “beater” gun that won’t quit in the mud, the SXP offers a compelling blend of speed, modern engineering, and value. **Why the Winchester SXP is Built for Speed** The headline feature of the SXP is its inertia-assisted action. Unlike traditional pump shotguns where the shooter must provide 100% of the energy to manually unlock and move the slide, the SXP’s rotary bolt design uses the actual recoil of the shot to help throw the slide rearward. **The Rotary Bolt Advantage** The SXP utilizes a four-lug rotary bolt that locks into the barrel extension. When you pull the trigger, the rearward force of the recoil begins the unlocking process for you. This means the slide practically jumps back on its own, allowing for follow-up shots that are significantly faster than competitors. **Dual Action Bars** To ensure this speed doesn’t lead to binding or jamming, Winchester uses dual action bars. These rigid steel bars prevent the forearm from twisting or catching, ensuring that every cycle is as smooth as glass, even when you’re racking the gun under the high-stress conditions of a duck blind or a home defense scenario. **Key Features and Specifications** The Winchester SXP isn’t just fast; it’s built with modern materials that make it durable and easy to handle in the field. - **Chrome-Plated Chamber and Bore:** Standard on all SXP models, the hard chrome lining resists the wear of steel shot and protects against the corrosion of harsh marsh environments. - **Aluminum Alloy Receiver:** This keeps the weight down—most models sit between 6 and 7 lbs—making it easy to carry through upland fields all day without fatigue. - **Inflex Technology Recoil Pad:** Pump shotguns are notorious for “kick,” but the Inflex pad is designed to channel the recoil impulse down and away from your cheek, significantly reducing felt recoil and muzzle jump. - **Back-Bored Technology:** By slightly increasing the bore diameter, Winchester reduces pellet deformation, resulting in tighter, more consistent shot patterns. **A Model for Every Mission: Finding Your SXP** With over 40 variants available, the SXP lineup is incredibly versatile. Here are the most popular models for hunters and sport shooters: **Model****Best Use Case****Key Features****SXP Black Shadow**All-Purpose / Entry LevelMatte black finish, synthetic stock, 3″ or 3 1/2″ chambers.**SXP Defender**Home Defense18″ barrel, compact profile, often features a fixed cylinder choke.**SXP Waterfowl**Duck & Goose HuntingMossy Oak or Realtree camo finishes, Perma-Cote protection.**SXP Field**Upland HuntingSatin-finished walnut stock, classic brass bead sight.**SXP Hybrid**Performance HuntingGray Perma-Cote finish on metal parts, TRUGLO fiber-optic sight.**Performance Review: Pros and Cons** Every firearm has its trade-offs. If you’re considering an SXP as your next purchase, here is an honest breakdown of what to expect. **The Pros** - **Unbeatable Speed:** The inertia-assisted action is legitimately faster than its competitors, making it feel almost like a semi-auto in the right hands. - **Affordability:** You can typically find an SXP for between $350 and $500, making it one of the best value-to-performance ratios on the market. - **Ergonomics:** The safety is located in front of the trigger guard, and the action release is behind it, which many find more intuitive than other layouts. **The Cons** - **Heavy Trigger:** Many users report a trigger pull weight of 7 to 10 lbs, which is heavier than some high-end competitors. It is a “working” trigger, not a match-grade one. - **Sourcing:** While Turkish CNC machining is world-class, some “Made in USA” purists may prefer domestic options. - **Aftermarket Limits:** While there are plenty of accessories available, the aftermarket for the SXP is slightly smaller. **Maintenance and Care** The SXP is a “drop-out” design, meaning you can remove a single pin to take out the entire trigger group for cleaning. This is a lifesaver if you drop your gun in the mud or sand during a hunt. **Pro-Tip:** Always keep the threads of your Invector-Plus choke tubes lightly oiled. Because the SXP is often used in wet conditions, neglecting these threads can lead to a “frozen” choke that is nearly impossible to remove without a gunsmith. **Final Verdict: Is the Winchester SXP Right for You?** The Winchester SXP is a pure workhorse. It doesn’t try to be a luxury heirloom; it tries to be the most reliable, fastest-cycling pump shotgun you can buy without breaking the bank. If you value a lightweight build, corrosion resistance, and lightning-fast follow-up shots, the SXP should be at the top of your list. Whether you’re staring down a limit of mallards or securing your home, the SXP is a modern evolution of a classic design that remains “The Gun that Won the West”—and continues to win on the range. **Categories:** Winchester --- ### [The Remington 870 Shotgun: America's Most Trusted Pump-Action Shotgun](https://www.atioutdoors.com/the-remington-870-shotgun-americas-most-trusted-pump-action-shotgun/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Remington 870 Shotgun: America’s Most Trusted Pump-Action Shotgun** The Remington 870 shotgun is more than just a firearm — it’s a true American icon. Since its introduction in 1950, the Remington 870 has become one of the best-selling shotguns in history, with over 11 million units produced. Hunters, homeowners, law enforcement officers, and sport shooters all rely on the 870 shotgun for its unmatched reliability, smooth operation, and incredible versatility. Built on a rock-solid pump-action design, the Remington 870 handles everything from light birdshot to heavy magnum slugs with ease. Its simple, rugged construction has earned it a reputation as a shotgun that simply refuses to quit, even after decades of hard use in the harshest conditions. **A Legendary History** Remington Arms introduced the Model 870 in 1950 as a modern replacement for their earlier Model 31. From day one, it was designed to be stronger, smoother, and more affordable than competing pump shotguns. Early models were offered in 12, 16, and 20 gauge, with everything from basic field guns to high-grade versions featuring beautiful walnut stocks. Over the years, the 870 lineup expanded to include 3-inch magnum chambers, 28-gauge and .410 bore options, and specialized tactical models. Today, the Remington 870 continues to evolve under new ownership while staying true to its original proven design. Its enduring success comes down to one simple fact: it just works — every single time. **Core Design and Specifications** At the heart of every Remington 870 shotgun is a milled steel receiver and dual action bars that deliver buttery-smooth pumping and exceptional durability. Unlike some lighter shotguns that use aluminum receivers, the 870’s steel construction gives it the strength to withstand heavy use and rough handling. Key specifications include: - **Gauges**: Most popular in 12-gauge, with 20-gauge, 28-gauge, and .410 bore also available - **Chambering**: Standard 2¾-inch or 3-inch magnum (some models handle 3½-inch Super Magnum shells) - **Barrel Lengths**: Range from compact 18-inch tactical barrels to 26–30 inch hunting and sporting barrels - **Capacity**: Typically 4+1, with easy options for extended magazines - **Weight**: Usually between 7 and 8 pounds, providing a stable shooting platform The bottom-loading, side-ejection design makes the 870 intuitive to use, while the robust extractor and ejector ensure reliable feeding and ejection even with dirty or varied ammunition. **Popular Remington 870 Models** The beauty of the **Remington 870** platform lies in its massive variety of configurations: - **870 Express** — An affordable, no-frills model perfect for first-time buyers and general field use - **870 Wingmaster** — The premium hunting version with higher-grade wood, polished bluing, and a noticeably smoother action - **870 Fieldmaster** — A modern take that restores much of the classic quality and fit-and-finish - **Tactical Models** — Short 18–20 inch barrels, synthetic stocks, and options for extended magazines or pistol grips — ideal for home defense - **Super Magnum** — Built to handle powerful 3½-inch shells for turkey hunting or waterfowl - **Slug Models** — Equipped with rifled barrels or cantilever scope mounts for deer hunting Because most parts are interchangeable across the platform, one 870 shotgun can be quickly reconfigured from a bird gun to a home-defense weapon with a simple barrel swap. **Why the Remington 870 Excels in Every Role** **Hunting**: Whether chasing doves, ducks, turkeys, or deer, the Remington 870 shotgun delivers excellent patterns with birdshot and devastating performance with slugs. Its balance, reliable cycling in cold or wet weather, and wide range of choke options make it a favorite among serious hunters. **Home Defense**: Many homeowners choose the 870 for its intimidating pump sound and stopping power at close range. An 18.5-inch barrel model loaded with 00 buckshot is compact enough for maneuverability yet powerful enough to stop a threat quickly and effectively. **Law Enforcement & Tactical Use**: For decades, police departments have trusted the 870 for its simplicity and dependability. No complex gas systems or electronics to fail — just reliable mechanical action when it matters most. **Sport Shooting**: Trap, skeet, and sporting clays enthusiasts appreciate the 870’s consistent performance and the huge aftermarket support for custom stocks, recoil pads, and sights. **Pros and Cons of the Remington 870** **Pros**: - Legendary reliability and longevity — many 870s last a lifetime with minimal maintenance - Extremely versatile platform with excellent aftermarket support - Smooth, positive pump action - Affordable pricing for new and used models - Proven performance in every environment **Cons**: - Slightly heavier than some competing pumps - Factory stock length-of-pull can feel long for smaller-statured shooters - Some older budget models had rougher finishes (newer production has improved significantly) For most shooters, the strengths of the Remington 870 far outweigh any minor drawbacks. **Customization and Accessories** One of the biggest advantages of owning a Remington 870 is the enormous selection of aftermarket parts. Popular upgrades include: - Stocks and forends for improved ergonomics - Extended magazine tubes for higher capacity - Ghost ring sights, red dot mounts, or scope bases - Weapon-mounted lights and side saddle shell carriers - Recoil pads and upgraded triggers With a few simple additions, a basic 870 shotgun can be transformed into a highly personalized home-defense rig or a competition-ready sporting gun. **Easy Maintenance Tips** The Remington 870 is famously easy to maintain. Regular cleaning involves basic field stripping: remove the barrel and trigger group, clean the bore and action bars, then lightly lubricate moving parts. Avoid over-oiling, as it can attract dirt in the field. With proper care, an 870 can function flawlessly for decades. Many owners report putting tens of thousands of rounds through their guns with only occasional cleaning. **Should You Buy a Remington 870?** In 2026, the Remington 870 shotgun remains one of the smartest purchases any shooter can make. It offers unbeatable value, proven performance, and the ability to serve multiple roles with a single firearm. Whether you’re a new shooter looking for your first shotgun, a hunter needing a dependable field gun, or a homeowner wanting reliable protection, the 870 delivers. New Fieldmaster and Wingmaster models continue the tradition of quality, while the used market offers excellent bargains for those willing to inspect carefully. If you want a shotgun that’s simple, strong, and ready for anything, few options can match the legendary Remington 870. **Categories:** Remington --- ### [The Ultimate Guide to the New England Firearms .223 Rifle](https://www.atioutdoors.com/the-ultimate-guide-to-the-new-england-firearms-223-rifle/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Ultimate Guide to the New England Firearms .223 Rifle: Accuracy Meets Versatility** In the world of single-shot rifles, few names carry as much weight and nostalgic reliability as New England Firearms (NEF). The NEF Handi-Rifle in .223 Remington has earned a legendary reputation among varmint hunters, target shooters, and those who appreciate a “one shot, one kill” philosophy. Whether you are a seasoned woodsman or a newcomer to the shooting sports, understanding why this rifle remains a staple—and how to modernize it—is key to maximizing your time at the range or in the field. **Why the New England Firearms .223 Remains a Classic** The NEF Handi-Rifle is the definition of rugged simplicity. These rifles were designed to be affordable without sacrificing the core fundamentals of accuracy and durability, making them a favorite for generations of American shooters. 1. **Exceptional Out-of-the-Box Accuracy** One of the most notable elements of the NEF .223 rifle is its inherent precision. The break-action design ensures a tight, consistent lock-up. Because there are no moving parts during the firing cycle—unlike a semi-auto—the barrel can vibrate consistently, which is a major factor in producing tight shot groups. 2. **The Versatility of the .223 Remington Caliber** Chambering a Handi-Rifle in .223 Remington makes it a true multi-purpose tool. It is widely considered the gold standard for varmint hunting, proving highly effective against prairie dogs, coyotes, and groundhogs. Furthermore, the low recoil makes it an ideal “trainer” rifle for younger shooters or those who prefer a more comfortable day at the range. 3. **Built for Longevity** The receivers used in these .223 models are crafted from high-strength steel, specifically designed to handle the pressures of centerfire cartridges. The simple break-open mechanism is remarkably easy to clean and maintain, allowing it to perform reliably even in harsh outdoor environments. **Modernizing Your Experience: The ATI Outdoors HRN4100** While the classic wood or synthetic stocks that came with the original NEF rifles are functional, they often lack the adjustability and ergonomics required for modern shooting styles. This is where the ATI Outdoors HRN4100 Shotforce Stock and Forend transforms the platform. If you want to turn your traditional single-shot into a tactical, highly adjustable precision tool, the HRN4100 is the most impactful upgrade available. **Why the ATI HRN4100 is a Must-Have Upgrade** The **ATI Outdoors HRN4100** is a six-position adjustable stock and tactical forend package specifically engineered for H&R and NEF single-shot rifles. Here is how it enhances your shooting experience: - **Customizable Length of Pull:** The six-position collapsible stock allows you to adjust the length of pull across a wide range. This means the rifle can perfectly fit a small-framed shooter or an adult wearing heavy, bulky winter hunting gear. - **Ergonomic Pistol Grip:** The textured pistol grip provides significantly better control and comfort compared to a traditional straight stock. It allows for a more natural wrist angle, which can improve trigger pull consistency and overall accuracy. - **Tactical Ribbed Forend:** The package includes a matching ribbed forend that offers a non-slip grip, ensuring your lead hand stays steady regardless of rain, mud, or sweat. - **High-Performance Materials:** Manufactured in the USA from extreme-temperature, glass-reinforced polymer, this stock is built to withstand the elements. It won’t warp in intense heat or become brittle in freezing temperatures. **Performance in the Field** When you pair the New England Firearms .223 with a modernized stock, you create a powerhouse for small-game hunting. The .223 Remington provides a remarkably flat trajectory, which is incredibly forgiving when taking shots at varying distances in the field. This combination of a high-velocity caliber and an adjustable, stable stock makes for a lightweight rig that punches well above its weight class. **Simple Installation: A New Lease on Life** Installing the ATI HRN4100 is a straightforward process that most owners can handle at home with basic tools. Because the NEF platform uses a simple attachment system—a single bolt through the rear of the receiver and a single screw for the forend—you can swap your old furniture for the ATI upgrade in just a few minutes. To get the most out of the upgrade, ensure the forend is seated correctly to maintain the barrel’s natural harmonics, preserving that famous Handi-Rifle accuracy while gaining modern handling capabilities. **Conclusion: A Modern Varmint Hunter’s Dream** The New England Firearms .223 rifle proves that you don’t need an expensive, complex setup to hit your target every time. By combining the reliable, time-tested action of the NEF with the modern ergonomics of the ATI Outdoors HRN4100 accessory, you get the best of both worlds: classic soul and modern performance. Whether you are clearing pests off the farm or spending a Saturday afternoon at the range, this setup offers a lightweight, accurate, and incredibly fun shooting experience. **Categories:** Additional Rifles --- ### [The Hi-Point 9mm Carbine: Best Budget 9mm Carbine for the Money in 2026](https://www.atioutdoors.com/the-hi-point-9mm-carbine-best-budget-9mm-carbine-for-the-money-in-2026/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Hi-Point 9mm Carbine: Best Budget 9mm Carbine for the Money in 2026** If you’re looking for an affordable and reliable Hi-Point 9mm Carbine, the Hi-Point 995TS (along with earlier 995 models) remains one of the top choices in the budget 9mm carbine category. Priced typically between $300 and $400, this American-made pistol-caliber carbine offers dependable performance for range plinking, home defense, truck gun use, and casual shooting. In this guide, we cover the key specs, real-world performance, pros and cons, and important upgrade considerations — including the popular ATI Outdoors PN: HIP9000 Hi-Point 9mm Carbine Stock. **Why the Hi-Point 9mm Carbine Is a Smart Buy** Hi-Point Firearms built its reputation on tough, straightforward guns that deliver solid value, and the **Hi-Point 9mm Carbine** lives up to that standard. Chambered in 9mm Luger and rated for +P ammunition, this blowback-operated semi-automatic carbine is fully American-made. It includes Hi-Point’s well-known lifetime “no questions asked” warranty for the original owner, which provides strong buyer confidence at this price level. The **Hi-Point 9mm Carbine** appeals to first-time carbine owners, budget shooters, and anyone seeking a practical 9mm long gun without spending significantly more. It serves well as a fun range gun, a home-defense option, or a reliable vehicle firearm. Many owners find it exceeds expectations once they spend time shooting it. **Hi-Point 9mm Carbine Specifications and Features** The current **Hi-Point 9mm Carbine**, often the Model 995TS, includes these practical features: - **Caliber**: 9mm Luger (+P rated) - **Barrel**: 16.5-inch threaded (½×28) with thread protector - **Overall Length**: Approximately 31 inches - **Weight**: About 6.25 pounds unloaded - **Capacity**: 10-round magazine (check local laws for higher-capacity options) - **Action**: Reliable blowback-operated semi-automatic - **Stock**: All-weather polymer skeleton stock with internal recoil buffer - **Sights**: Fully adjustable rear peep and front post - **Rails**: Picatinny-style accessory rails for optics, lights, or grips - **Extras**: Last-round bolt hold-open, thumb magazine release, and sling swivel points The combination of a heavy steel receiver and polymer furniture keeps the rifle balanced. The blowback system and buffer make the **Hi-Point 9mm Carbine** soft-shooting, even with high volumes of inexpensive 9mm ammo. **Real-World Performance of the Hi-Point 9mm Carbine** Users consistently praise the **Hi-Point 9mm Carbine** for its reliability across various 9mm loads — from budget FMJ to defensive hollow points. Many report good accuracy, with groups in the 1.5–2 inch range at 50 yards from a rest. That level of performance is impressive for a sub-$400 carbine. The threaded barrel allows easy addition of a suppressor or muzzle device (where legally permitted). Recoil is mild, making the rifle beginner-friendly and comfortable for extended sessions. Disassembly and basic maintenance are straightforward, helping the carbine stay reliable for years with proper care. **Pros and Cons of the Hi-Point 9mm Carbine** **Pros:** - Very affordable pricing - Strong reliability with mixed 9mm ammunition - Low recoil and easy handling - Threaded barrel for customization - Lifetime warranty - 100% American-made construction **Cons:** - Factory ergonomics and styling feel basic to some - Heavier than many newer polymer PCC designs - Magazine capacity limits in certain states - Traditional Hi-Point appearance may not appeal to everyone Function and value usually win out over cosmetics. Most owners say the Hi-Point 9mm Carbine performs well beyond its price once they hit the range. Stock Upgrade Option: ATI Outdoors PN: HIP9000 Many shooters want improved ergonomics over the factory stock. The ATI Outdoors PN: HIP9000 Hi-Point 9mm Carbine Stock is a popular aftermarket choice made in the USA from durable DuPont Extreme Reinforced Polymer. It features a modern ergonomic shape, textured grip areas, ambidextrous comfort, front and rear sling studs, and a weatherproof finish — all at a budget-friendly price. **Important compatibility note**: According to the manufacturer, the **ATI Outdoors PN: HIP9000** fits most standard Hi-Point 9mm carbines but **does not fit the newer Hi-Point 995TS** models due to updated retaining clips and receiver shroud design. Some older 995 models may require minor modification for a perfect fit. Always check current compatibility details and installation instructions directly on **atioutdoors.com** before purchasing. Original receiver cover and barrel bolts are required for installation on compatible models. For owners of compatible Hi-Point 9mm carbines, the ATI Outdoors PN: HIP9000 can noticeably improve handling, cheek weld, and overall feel, giving the rifle a more modern and custom look without a large investment. Visit atioutdoors.com to review the latest fitment information and order the ATI Outdoors PN: HIP9000 if it suits your specific model. **Best Uses for the Hi-Point 9mm Carbine** This carbine shines in everyday shooting scenarios: - **Range Plinking** — Affordable 9mm ammo makes it fun for high-volume sessions. - **Home Defense** — Compact length and reliable operation aid indoor maneuverability. - **Truck Gun** — Rugged build and simple design make it practical. While not a precision match rifle, the Hi-Point 9mm Carbine handles most civilian shooting needs effectively. **Final Thoughts on the Hi-Point 9mm Carbine** In 2026, the Hi-Point 9mm Carbine continues to offer excellent value as a budget 9mm carbine. You get American-made reliability, soft shooting characteristics, and a lifetime warranty at a price that leaves room in the budget for ammo and accessories. If your model is compatible, the ATI Outdoors PN: HIP9000 stock from atioutdoors.com can be a worthwhile upgrade for better ergonomics. Be sure to verify exact fitment for your 995 or 995TS before ordering, as newer 995TS versions have design changes that prevent a direct drop-in. Whether you keep the factory stock or explore upgrades, the Hi-Point 9mm Carbine proves you don’t need to spend a fortune for a functional and enjoyable 9mm carbine. Check local laws, head to the range, and enjoy shooting one of the most accessible PCC options available. **Categories:** Additional Rifles --- ### [ATI Outdoors Enfield Stocks: The Ultimate Upgrade](https://www.atioutdoors.com/ati-outdoors-enfield-stocks-the-ultimate-upgrade/) **Published:** March 27, 2026 **Author:** msarver **Content:** # ATI Outdoors Enfield Stocks: The Ultimate Upgrade for Your Lee Enfield Rifle *ENF0041 & ENF0013 | Monte Carlo Replacement Stocks | Made in the USA* If you own a classic Lee Enfield rifle, you already know the legendary reliability and accuracy that made this bolt-action icon a staple of British Commonwealth forces for over a century. But after decades of service, many original Enfield stocks show their age — worn wood, cracked grips, and a look that says “museum piece” rather than “hunting companion.” That’s where ATI Outdoors steps in. With their purpose-built Monte Carlo replacement stocks, specifically part numbers **ENF0041** and **ENF0013**, ATI Outdoors has created a drop-in solution that breathes new life into one of the world’s most beloved military rifles. ## Why Upgrade Your Lee Enfield Stock? The Lee Enfield rifle has been chambered in both .303 British and .308 Winchester, serving hunters, collectors, and sport shooters alike. However, the original wood stocks were designed for military function, not modern ergonomics or durability. Humidity warps wood, field use causes cracks, and decades of storage leave many Enfield stocks unfit for serious shooting. ATI Outdoors’ polymer Monte Carlo stocks solve all of these problems at once, giving your rifle a fresh, sporting look while dramatically improving functionality. ## ATI Outdoors ENF0041 — Lee Enfield No. 4, Mk 1, Mk 2, Mk 5 Monte Carlo Stock The ATI Outdoors ENF0041 is engineered specifically for shooters who own the iconic Lee Enfield No. 4 series — the Mk 1, Mk 2, and Mk 5 variants chambered in .303 or .308. **Key Features of ENF0041:** - Fits: .303/.308 No. 4, Mk 1, Mk 2, Mk 5 (rear sight on receiver) - Classic Monte Carlo design with raised cheekrest. - Two sling swivel studs — compatible with ATI sling swivels (Part # A.5.10.2506) or standard sling swivels - Buttplate included for a complete, out-of-the-box installation - Checkered pistol grip and forearm for a secure, non-slip hold - Scratch-resistant and weatherproof construction - Easy drop-in installation — no gunsmithing required - 14-inch length of pull for comfortable shooting ergonomics - Built from DuPont Extreme Temperature Glass Reinforced Polymer — virtually indestructible - Manufactured in the USA with a Limited Lifetime Warranty ## ATI Outdoors ENF0013 — Lee Enfield No. 1 Mk 3 & Ishapore .308 Monte Carlo Stock The ATI Outdoors ENF0013 is the go-to aftermarket stock for owners of the classic Lee Enfield No. 1 Mk 3 — often referred to as the SMLE (Short Magazine Lee Enfield) — as well as Ishapore .308 variants. **Key Features of ENF0013:** - Fits: Most .303 No. 1, Mk 3 and .308 No. 1 Mk 3 (rear sight on barrel), including Ishapore 308 variants - Monte Carlo stock design with raised cheekrest for improved scope alignment and shooting comfort - Two sling swivel studs for versatile sling attachment options - Buttplate included — everything needed for a complete stock replacement - Checkered pistol grip and forearm for enhanced grip and control - Scratchproof and weatherproof — built to handle the elements - Drop-in installation with no gunsmithing required - 14-inch length of pull - DuPont Extreme Temperature Glass Reinforced Polymer construction - Made in the USA with a Limited Lifetime Warranty ## ATI Outdoors Enfield Stock Color Options One of the most appealing aspects of ATI Outdoors’ Enfield stock lineup is the variety of color options available, allowing you to personalize your rifle for hunting, range use, or display. The Enfield Monte Carlo stocks are available in the following finishes: - Matte Black — The classic, tactical finish that pairs well with any Enfield variant. The standard ENF0041 and ENF0013 are offered in matte black glass-filled nylon, providing a sleek, no-nonsense look. - Woodland Brown — Both Enfield options available in Woodland Brown is a rich, earthy tone ideal for hunters who spend time in wooded or mixed environments. ## DuPont Glass Reinforced Polymer: Built to Last a Lifetime Both the ENF0041 and ENF0013 are constructed from DuPont Extreme Temperature Glass Reinforced Polymer — a premium material chosen specifically for its resistance to warping, cracking, and degradation under harsh conditions. Unlike traditional wood stocks, this polymer will not absorb moisture, won’t swell in humidity, and performs reliably across a wide temperature range. The result is a stock that maintains its fit and function whether you’re hunting in a cold Canadian winter or a hot Texas summer. ATI Outdoors backs this durability with a Limited Lifetime Warranty, a testament to their confidence in the product. ## ENF0041 vs. ENF0013: How to Choose the Right ATI Enfield Stock Choosing between the ENF0041 and ENF0013 comes down to one simple check — the location of your rear sight: - Rear sight on the RECEIVER → Choose ENF0041 (fits No. 4, Mk 1, Mk 2, Mk 5) - Rear sight on the BARREL → Choose ENF0013 (fits No. 1, Mk 3, and Ishapore .308) *Note that some minor modification may be required for a perfect fit depending on your specific variant. ATI Outdoors’ scope mounts (sold separately) are also available to complement your new stock and complete the sporting transformation of your Enfield.* ## Final Verdict: Give Your Enfield the Stock It Deserves Whether you’re a hunter looking to modernize your .303 SMLE, a collector wanting to preserve the original wood while still shooting comfortably, or simply a shooter who appreciates the legendary Enfield action, the ATI Outdoors Monte Carlo stocks — ENF0041 and ENF0013 — are among the best aftermarket upgrades on the market. They’re American-made, backed by a lifetime warranty, available in multiple colors, and install without a gunsmith. **Categories:** Enfield --- ### [.303/.308 Enfield No. 4 Mk1, Mk2 & Mk5 Guide + ATI Stock Upgrade](https://www.atioutdoors.com/303-308-enfield-no-4-mk1-mk2-mk5-guide-ati-stock-upgrade/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The Legendary .303/.308 Enfield No. 4 Mk1, Mk2, and Mk5 Rifles: History, Specs, and Modern Upgrades** If you’re searching for a “.303 Enfield No. 4 rifle,” “.308 Enfield conversion,” “Lee Enfield No. 4 Mk1,” “No. 4 Mk2,” or “Mk5 Jungle Carbine,” this guide covers everything you need to know. The Lee-Enfield No. 4 series stands as one of the most reliable, battle-tested bolt-action rifles ever produced. Chambered originally in the hard-hitting .303 British cartridge and later converted to the versatile .308 Winchester in many examples, these rifles continue to deliver outstanding performance on the range, in the field, and as prized collectors’ pieces. In this article, we’ll explore the background of the Enfield No. 4 line, break down the differences between the Mk1, Mk2, and Mk5 variants, discuss their shooting characteristics, and show how a simple upgrade like the ATI Outdoors PN: ENF0041 Monte Carlo Stock can bring new life to these classics. **The Story Behind the Enfield No. 4 Series** The Lee-Enfield family has deep roots in British military history, but the No. 4 series emerged in the late 1930s and early 1940s as a more efficient design for mass production during wartime. Built as an evolution of earlier Short Magazine Lee-Enfield models, the No. 4 was engineered for faster manufacturing while maintaining the smooth bolt operation and rugged reliability that made the platform famous. The original .303 British round offered excellent long-range capability and stopping power, making the rifle effective for infantry use across varied terrains. After World War II, many No. 4 actions were converted to .308 Winchester (7.62×51 NATO) by various armorers and manufacturers. These .308 Enfield conversions remain popular today because they pair the classic Enfield action with widely available modern ammunition, flatter trajectories, and improved performance for target shooting and hunting. **Understanding the Key Variants: No. 4 Mk1, Mk2, and Mk5** **Enfield No. 4 Mk1 (.303 British, with many .308 conversions)** The Mk1 served as the primary wartime version. It featured a heavier, free-floating barrel for better accuracy, an aperture rear sight graduated for long distances, and a receiver designed for simplified production. These rifles typically weigh around 8.5 to 9 pounds and measure about 44 inches overall. Many examples include “Mk1\*” variations that made bolt disassembly even quicker for field use. The design proved tough and dependable in harsh conditions. **Enfield No. 4 Mk2 (.303 British, frequently converted to .308)** Introduced after the war as a refined peacetime model, the Mk2 brought several improvements, most notably a “hung” trigger attached directly to the receiver for a cleaner, more consistent pull. It often came with higher-quality wood stocks and better overall fit and finish. The Mk2’s smoother handling and trigger characteristics make it a favorite among precision shooters. Many post-war Mk2 rifles received .308 conversions, giving owners the benefits of modern ammo while retaining the Enfield’s fast 10-round magazine and silky bolt throw. **Enfield No. 5 Mk1 (Jungle Carbine – often referred to as the Mk5)** Developed for jungle and airborne operations, the No. 5 Mk1 (commonly called the Jungle Carbine or Mk5 in collector circles) is a lighter, shorter version of the No. 4. With a reduced barrel length, flash hider, and overall weight around 7 pounds, it offers excellent maneuverability in thick cover. The trade-offs include noticeably sharper recoil due to the lighter weight and occasional challenges with maintaining zero under heavy use. Original No. 5 Mk1 rifles are sought after by collectors, though sporterized or replica versions also appear on the market. All three variants share the classic rear-locking bolt system, detachable 10-round box magazine, and proven reliability that has earned the Lee-Enfield family a legendary reputation. **Shooting Performance and Real-World Use** Enfield No. 4 rifles are respected for their inherent accuracy—many well-maintained examples can deliver sub-2 MOA groups with good ammunition when properly set up. The .303 British provides solid energy for medium game like deer out to reasonable hunting distances, while .308 conversions benefit from abundant factory loads and reloading components, making them practical for both range work and field use. Shooters appreciate the short, smooth bolt throw that allows rapid follow-up shots. The rifles handle well offhand or from a rest, and the 10-round capacity gives them an edge over many single-stack modern bolt guns. Potential downsides include the weight of full-size Mk1 and Mk2 models for long carries, and the increased felt recoil on the lighter Mk5. Original military wood stocks can also be sensitive to moisture and temperature changes, which is where modern synthetic replacements make a big difference. **Upgrade Your Enfield with the ATI Outdoors PN: ENF0041 Monte Carlo Stock** One of the easiest and most effective ways to modernize a .303 or .308 Enfield No. 4 Mk1, Mk2, or Mk5 is with the ATI Outdoors PN: ENF0041 Monte Carlo Stock. This affordable, made-in-the-USA drop-in replacement transforms the classic military look into a sleek, ergonomic sporting rifle ready for hunting or target shooting. Crafted from durable DuPont Extreme Temperature Glass Reinforced Polymer, the ENF0041 is scratch-resistant and weatherproof, eliminating the worries of wood warping or cracking. Key features include: - A raised Monte Carlo cheekrest for improved eye alignment with iron sights or a scoped setup - Checkered pistol grip and forearm for confident handling in wet or cold conditions - Two sling swivel studs for easy attachment of standard swivels Backed by a limited lifetime warranty, installation is straightforward for most users (minor fitting or sanding may be needed on some heavily modified rifles). The stock is available in Black or Woodland Brown finishes to suit your preference. Owners consistently report that the ATI ENF0041 turns a basic surplus Enfield into a comfortable, modern performer. Whether you’re refreshing a WWII-era No. 4 Mk1, fine-tuning a Mk2, or taming recoil on a Mk5 Jungle Carbine, this stock delivers better ergonomics without sacrificing the rifle’s historical character. **Why the .303/.308 Enfield No. 4 Remains Popular Today** Surplus and converted Enfield No. 4 rifles are still widely available and affordable, often making them an ideal entry point into bolt-action shooting or military collecting. They’re fun to reload for, legal in most areas, and perform reliably with both vintage .303 and modern .308 ammunition. Many enthusiasts appreciate the blend of history and practicality these rifles offer. Pairing one with a quality synthetic stock like the ATI ENF0041 creates a versatile firearm that feels at home whether you’re punching paper, hunting deer, or simply enjoying a classic piece of firearms engineering. **Final Thoughts on the Timeless Enfield No. 4 Series** From wartime service to modern sporting use, the .303/.308 Enfield No. 4 Mk1, Mk2, and Mk5 rifles embody rugged simplicity and proven performance. Their smooth actions, generous magazine capacity, and battlefield heritage continue to win fans decades later. If you’re in the market for a “.303 Enfield No. 4 for sale” or considering a “.308 Enfield conversion,” adding the ATI Outdoors PN: ENF0041 Monte Carlo Stock is one of the smartest upgrades you can make. It combines the best of old-world reliability with contemporary comfort and durability. **Categories:** Enfield --- ### [The Ultimate SKS Rifle Upgrade Guide](https://www.atioutdoors.com/the-ultimate-sks-rifle-upgrade-guide/) **Published:** March 27, 2026 **Author:** msarver **Content:** # The Ultimate SKS Rifle Upgrade Guide: Why the ATI Outdoors Strikeforce Stock Is a Game-Changer The SKS rifle has been a favorite among shooters for decades — and for good reason. Originally designed by Soviet engineer Sergei Gavrilovich Simonov in 1943, the SKS semi-automatic carbine chambered in 7.62×39mm has stood the test of time as one of the most reliable, affordable, and widely available military surplus rifles on the market. Whether you own a Chinese Norinco Type 56, a Yugoslavian PAP M59/66, a Russian SKS, or a Romanian variant, one thing is clear: today’s SKS shooters want modern performance without sacrificing the character of a classic rifle. That’s where ATI Outdoors comes in. With their Strikeforce SKS GEN2 Stock (SKU: C.2.10.1232), you can transform your SKS rifle into a fully modern, tactically capable firearm — without breaking the bank. In this guide, we’ll dive into why the SKS remains a top pick for shooters, what makes the ATI Strikeforce stock one of the best SKS upgrades available, and how to choose the right color option for your build. ## Why the SKS Rifle Remains a Shooter’s Classic Despite being over 80 years old in design, the SKS rifle continues to attract new generations of shooters. Here’s why: - Affordability: SKS rifles are among the most budget-friendly centerfire semi-automatics on the market, making them an excellent entry point for new gun owners. - Reliability: Military-grade construction means the SKS functions in nearly any condition — dirt, cold, heat, or rain. - 62×39mm Chambering: This powerful, widely available round offers excellent stopping power for hunting, home defense, and range shooting. - Upgrade Potential: A massive aftermarket ecosystem means you can customize your SKS to suit any role — hunting, home defense, range fun, or tactical training. - Collectibility: Variants like the Russian SKS, Norinco SKS-M, and Yugo SKS each carry unique historical value that appeals to collectors and shooters alike. Popular SKS variants compatible with modern upgrades include the Chinese Type 56, the Norinco SKS-M, the Yugoslavian PAP M59/66, the Romanian Model 56, the Albanian SKS M59, and the North Vietnamese and North Korean variants. With over 15 million SKS rifles produced worldwide, parts and accessories are plentiful — making upgrades like the ATI Strikeforce stock a smart investment. ## Introducing the ATI Outdoors Strikeforce SKS GEN2 Stock (C.2.10.1232) If you’re serious about upgrading your SKS, the ATI Outdoors Strikeforce SKS GEN2 Stock (SKU: C.2.10.1232) should be at the top of your list. Retailing for $139.99 and backed by a limited lifetime warranty, this Made in the USA stock completely transforms the look, feel, and function of your SKS rifle. **Key features of the ATI Strikeforce SKS GEN2 Stock include:** - TactLite GEN2 Six-Position Adjustable Stock: Dial in your ideal length of pull for a customized, comfortable fit every time. - Side-Folds to the Left of the Receiver: Compact storage and transport without removing the stock. - Can Be Fired from the Folded Position: Maintain full functionality even in tight spaces. - TracLOCK GEN2 System: Eliminates horizontal and vertical movement on the buffer tube for a rock-solid, rattle-free fit. - Four Forward Picatinny Rail Locations: Attach lights, lasers, grips, or any standard accessory. - One 4-Inch Picatinny Rail: Additional rail space for optics or accessories. - X Series Thin Recoil Pad: Reduces felt recoil for longer, more comfortable shooting sessions. - X1 Style Pistol Grip: Ergonomic design for improved control and comfort. - Slot for Tactical Sling Attachment: Easy sling integration for carry or competition. - Additional Ventilation in Forend and Top Cover: Promotes airflow during extended shooting sessions. - Extreme Temperature Glass Reinforced Polymer (DuPont High Temp): Built to last through any weather or environment. - Sling Swivel Studs: Compatible with ATI’s Sling Swivel (Part # A.5.10.2506) or any standard sling swivel. - Upgrade-Ready Butt Pad: Compatible with ATI X1 or X2 Recoil Reducing Butt Pad (A.5.10.2530 & A.5.10.2531). The C.2.10.1232 fits most SKS rifles, though minor modifications may be required in some cases, and the blade bayonet must be removed prior to installation. Rated 4.77 out of 5 stars across 74 customer reviews, this stock is a proven performer with a loyal following. ## ATI Strikeforce SKS GEN2 Stock — Color Options One of the best things about the ATI Strikeforce SKS GEN2 Stock is that it comes in three distinct color options, so you can match your rifle to your style, mission, or environment: 1. **Black (C.2.10.1232)** The classic and most popular finish. Black offers a clean, tactical appearance that pairs well with virtually any SKS variant. It’s an ideal choice for shooters who want a universal, no-nonsense look that works equally well at the range or in the field. 2. **Flat Dark Earth / FDE (C.2.20.1232)** FDE is a favorite among hunters and outdoors enthusiasts who want a more natural earth-tone finish. It provides a subtle, tactical look that blends well into dry or desert environments, making it a great choice for hunters or anyone who prefers a less stark appearance. 3. **Destroyer Gray (C.2.40.1232)** A modern, stylish alternative that sits between black and traditional camo colors. Destroyer Gray offers a sophisticated, contemporary finish that looks great on any SKS platform and is particularly popular for custom builds. This finish pairs especially well with silver or stainless hardware. 4. **Urban Combat (C.2.50.1232)** Think cool-toned gray with green highlights—subtle, durable-looking, and very much in the “tactical gray/green” family common in modern firearm accessories. If you’re picturing a rifle stock, it’s that versatile non-black option that stands out just enough to look intentional on a plinker, home-defense gun, or range toy. ## Which SKS Rifles Are Compatible with the ATI Strikeforce Stock? The ATI Outdoors Strikeforce GEN2 Stock is designed to fit most standard SKS variants. Compatible platforms include: - Chinese Norinco Type 56 SKS - Norinco SKS-M (detachable magazine variant) - Russian/Soviet SKS (original Simonov design) - Yugoslavian PAP M59/66 (note: spike bayonet/grenade launcher assembly may require modification) - Romanian Model 56 SKS - Albanian SKS M59 - North Vietnamese and North Korean variants As with all aftermarket SKS stocks, some minor fitting work may be needed depending on your specific rifle’s tolerances. Many users report a snug fit that may require light sanding or filing at specific contact points — a straightforward task with basic hand tools. ## Why Choose ATI Outdoors for Your SKS Upgrades? ATI Outdoors — Advanced Technology International — has been a trusted name in firearm accessories for decades. All of their products, including the Strikeforce SKS GEN2 Stock, are manufactured in the USA and backed by a limited lifetime warranty. Their products also count as SEC922R compliance parts, a significant advantage for shooters building or modifying imported firearms. With an extensive product ecosystem — including ATI’s X1 and X2 Recoil Reducing Butt Pads, sling swivels, and SKS scope mounts — upgrading your SKS into a fully modernized rifle has never been more accessible. ## Final Verdict: Upgrade Your SKS Today The SKS rifle is a proven, enduring platform that continues to reward owners who invest in quality upgrades. The ATI Outdoors Strikeforce SKS GEN2 Stock (C.2.10.1232) delivers a complete transformation — improved ergonomics, tactical versatility, and a rugged, USA-made build — at a price point that makes sense for any serious SKS owner. Whether you choose the clean look of Black (C.2.10.1232), the warm tones of Flat Dark Earth (C.2.20.1232), or the modern edge of Destroyer Gray (C.2.40.1232), you’re getting one of the best SKS stock upgrades on the market. Available now at atioutdoors.com, the Strikeforce GEN2 Stock is the upgrade your SKS has been waiting for. **Categories:** SKS --- ### [Discover why the .22 LR caliber rifle remains the king of rimfire in 2026](https://www.atioutdoors.com/discover-why-the-22-lr-caliber-rifle-remains-the-king-of-rimfire-in-2026/) **Published:** March 26, 2026 **Author:** msarver **Content:** **The 2026 Guide to .22 LR Caliber Rifles: Why the Rimfire King Still Reigns** In the ever-evolving world of firearms, few cartridges have maintained the staying power of the .22 LR (Long Rifle). While high-powered centerfire cartridges often grab the headlines, the humble rimfire remains the backbone of the shooting community. As we move through 2026, the “.22 LR caliber rifle” is seeing a massive surge in innovation, blending classic reliability with modern tactical and precision features. Whether you are a newcomer looking for a first rifle or a veteran marksman seeking a low-cost training platform, understanding the current landscape of the .22 LR is essential. **The Enduring Appeal of the .22 LR Cartridge** The primary reason the .22 LR remains the world’s most popular round is its sheer accessibility. From a financial standpoint, it is the only caliber that allows a shooter to spend an entire afternoon at the range for the price of a modest lunch. This affordability translates directly into more “trigger time,” which is the single most important factor in developing marksmanship skills. Beyond cost, the .22 LR offers a shooting experience that is physically easy on the user. The near-absence of recoil allows shooters to focus entirely on their fundamentals—sight picture, breath control, and trigger reset—without the distraction of a heavy kick. This makes it the undisputed champion for training youth shooters and maintaining the skills of seasoned pros. **Choosing the Right Action: Semi-Auto vs. Bolt-Action** When selecting a .22 LR rifle in 2026, the first major decision is the action type. This choice dictates how you will interact with the firearm and what its primary strengths will be. **The Versatile Semi-Automatic** Semi-automatic .22 rifles are the gold standard for “plinking” and high-volume fun. By using the gas or blowback energy of a fired round to cycle the next one, these rifles allow for rapid follow-up shots. Modern semi-autos have become incredibly reliable, with many models now featuring modular stocks and optics-ready rails. They are the ideal choice for reactive target shooting or clearing a field of small pests where speed is a priority. **The Precise Bolt-Action** For those who value “one shot, one hit” accuracy, the bolt-action .22 LR is the superior tool. Because the action is manually locked by the shooter, there are fewer moving parts during the firing sequence, leading to inherently better consistency. In the 2026 market, we see many bolt-action rimfires designed as “trainers” that mimic the weight and feel of full-sized precision rifles. If your goal is tight groups at 100 yards or ethical small-game hunting, the bolt-action is your best bet. **Modern Features of 2026 Rimfire Rifles** The technology integrated into today’s rimfire platforms has bridged the gap between “toy” and “tool.” Here are the trends defining the best .22 LR rifles this year: - **Threaded Barrels:** Suppressed shooting is more popular than ever. A threaded barrel allows for the easy addition of a rimfire silencer, making the shooting experience nearly silent and much more neighbor-friendly. - **Modular Ergonomics:** Modern stocks now offer adjustable lengths of pull and comb heights. This ensures that a single rifle can comfortably fit a child, a teenager, and an adult. - **Enhanced Optics Integration:** The days of “tip-off” 11mm dovetail mounts are fading. Most high-quality 2026 models now feature integrated Picatinny rails, allowing shooters to mount full-sized red dots or high-magnification scopes. - **Match-Grade Chambers:** Manufacturers are tightening their tolerances. Many off-the-shelf .22 LR rifles now come with chambers designed specifically for match ammunition, providing sub-MOA accuracy right out of the box. **Maximizing Your .22 LR Performance** To get the most out of a .22 LR rifle, ammunition selection is key. Unlike centerfire rifles, which are generally consistent across brands, rimfire rifles can be “picky” about what they eat. It is common for one rifle to prefer high-velocity copper-plated rounds for cycling reliability, while another might only achieve its best accuracy with standard-velocity lead round-nose bullets. For 2026, the trend has shifted toward “subsonic” loads. When paired with a modern bolt-action rifle and a suppressor, these rounds stay below the speed of sound, eliminating the “crack” of a sonic boom and providing the quietest shooting experience possible. **Conclusion: A Staple for Every Safe** The .22 LR caliber rifle is more than just a beginner’s firearm; it is a precision instrument, a cost-effective trainer, and a reliable harvester of small game. With the advancements in manufacturing seen throughout 2026, there has never been a better time to add a high-quality rimfire to your collection. Whether you prefer the rapid-fire joy of a semi-auto or the disciplined precision of a bolt-action, the .22 LR remains the most essential caliber in the world of shooting sports. **Categories:** .22 cal --- ### [The SKS Rifle: A Complete Guide to History, Specs, and 2026 Market Trends](https://www.atioutdoors.com/the-sks-rifle-a-complete-guide-to-history-specs-and-2026-market-trends/) **Published:** March 27, 2026 **Author:** msarver **Content:** **The SKS Rifle: A Complete Guide to History, Specs, and 2026 Market Trends** For many firearms enthusiasts, the SKS rifle represents the perfect intersection of military history, rugged reliability, and affordable shooting. Formally known as the *Samozaryadny Karabin sistemy Simonova* (Simonov Self-loading Carbine), this Cold War icon has transitioned from a frontline Soviet infantry weapon to one of the most beloved surplus rifles in the world. Whether you are a first-time buyer looking for a dependable 7.62x39mm rifle or a seasoned collector hunting for a rare Tula or Izhevsk variant, understanding the nuances of the SKS is essential. In this guide, we’ll explore why the SKS remains a top contender in the 2026 market. **A Brief History of the SKS Rifle** Designed by Sergei Gavrilovich Simonov in 1943, the SKS rifle was intended to modernize the Soviet arsenal. At the time, the Red Army was looking to bridge the gap between the heavy, bolt-action Mosin-Nagant and the rapid-fire submachine guns used in urban combat. The SKS was officially adopted in 1949, but its time as the primary Soviet service rifle was short-lived. By the early 1950s, the AK-47—with its detachable high-capacity magazines and select-fire capability—began to phase it out. However, the SKS rifle found a second life through global licensing. Millions were produced in China (Type 56), Yugoslavia (M59/66), and various Eastern Bloc nations, cementing its status as a legendary “people’s carbine.” **Technical Specifications: Built for the Tundra** The SKS is a gas-operated, semi-automatic carbine known for its “overbuilt” construction. Unlike many modern rifles that rely on stamped sheet metal, the SKS features a milled steel receiver and a heavy-duty wooden stock, giving it a balanced, solid feel. **Feature****Specification****Caliber**7.62x39mm**Action**Gas-operated, short-stroke tilting bolt**Capacity**10-round fixed internal magazine**Barrel Length**20.5 inches (Typical)**Overall Length**40.2 inches**Weight**~8.5 lbs (Unloaded)**Muzzle Velocity**~2,410 ft/sOne of the most defining characteristics of the SKS is its folding bayonet. Most Russian and Yugoslavian models feature a blade-style bayonet, while Chinese Type 56 models are famous for their “spike” (cruciform) bayonets. **SKS Variants: Which One is Right for You?** When searching for an SKS for sale, you’ll encounter several distinct “flavors” of the rifle. Each has its own collector value and unique features: - **Russian SKS:** Often considered the “gold standard” for collectors. These feature beautiful birch stocks and are typically found with Tula or Izhevsk arsenal marks. - **Chinese Type 56:** The most prolific variant. Early “Sino-Soviet” models are highly prized for their quality, while later Norinco models are great “shooters” that offer excellent value for the money. - **Yugoslavian M59/66:** Easily identified by its integrated grenade launcher and flip-up ladder sights. These are heavier than other variants but are built with incredible durability. - **Albanian SKS:** One of the rarest variants, distinguished by an elongated handguard and a unique “hook” charging handle. **SKS vs. AK-47: The Great Debate** The question often arises: *Should I buy an SKS or an AK-47?* While both chamber the 7.62x39mm round, they offer very different shooting experiences. 1. **Accuracy:** Due to its longer barrel and fixed internal magazine, many shooters find the SKS to be inherently more accurate than standard AK variants at ranges up to 300 yards. 2. **Legality:** In many jurisdictions with strict firearm regulations, the SKS (in its original fixed-magazine configuration) often remains legal because it lacks a detachable magazine and pistol grip. 3. **Reloading:** The SKS uses stripper clips, which allow for surprisingly fast reloads with practice. While not as fast as a mag-change on an AK, it is a reliable system that ensures you never have to worry about losing expensive magazines in the field. **Maintenance Tip:** If you’re buying a surplus SKS, it will likely arrive coated in Cosmoline—a thick, waxy grease used for long-term storage. A deep cleaning of the gas system and firing pin channel is mandatory to ensure safe operation. **The SKS in 2026: Market Trends and Value** Is the SKS still a “budget” rifle? In the early 2000s, these could be found at gun shows for the price of a nice dinner. In 2026, the market has matured. Due to diminishing global supplies of military surplus, prices for a standard Chinese SKS now range from $450 to $650, while pristine Russian models can easily exceed $1,000. Despite the price hike, the SKS remains a solid investment. It is a “Curio & Relic” (C&R) eligible firearm in the U.S., making it a favorite for history buffs. Furthermore, its reputation as a rugged “brush gun” for deer hunting keeps it relevant for practical outdoorsmen and survivalists alike. **Conclusion** The SKS rifle is more than just a relic of the Cold War; it is a testament to rugged engineering. Whether you appreciate it for its historical significance, its reliability in harsh conditions, or its role as a versatile range companion, the SKS is a platform that every shooter should experience at least once. As supplies of original surplus dwindle, 2026 is an excellent time to add this iconic carbine to your collection before they become true museum pieces. **Categories:** SKS --- ### [Discover the ATI Strikeforce GEN2 Stock for Ruger 10/22 rifles.](https://www.atioutdoors.com/discover-the-ati-strikeforce-gen2-stock-for-ruger-10-22-rifles/) **Published:** March 26, 2026 **Author:** msarver **Content:** # Best .22LR Rifles and How to Upgrade Them with ATI Outdoors’ Strikeforce GEN2 Stock Whether you’re a first-time shooter, a seasoned plinker, or a tactical enthusiast, the .22LR caliber rifle remains one of the most popular and versatile platforms in the firearms world. Affordable ammunition, minimal recoil, and a wide variety of compatible rifles make .22LR an excellent choice for target shooting, small game hunting, and skill-building practice. And when paired with a premium aftermarket stock like the ATI Outdoors Strikeforce GEN2 (SKU: C.2.10.1216), your .22LR rifle can be transformed into a modern, ergonomic powerhouse. ## Why the .22LR Caliber Continues to Dominate The .22 Long Rifle cartridge has been a staple of American shooting culture for well over a century. Its low recoil makes it ideal for beginners and youth shooters, while its accuracy and range keep experienced marksmen coming back. Ammunition costs remain the lowest of any centerfire or rimfire option on the market, allowing shooters to get maximum range time without breaking the bank. The .22LR is chambered in dozens of rifle platforms, from lever-actions and bolt-actions to semi-automatic sporting rifles. Among these, the Ruger 10/22 stands out as the gold standard — a semi-automatic .22LR that has sold millions of units worldwide and supports one of the largest aftermarket accessory ecosystems of any rimfire rifle in existence. ## Top .22LR Rifles That Fit the ATI Outdoors Strikeforce GEN2 Stock The ATI Outdoors Strikeforce GEN2 Stock (C.2.10.1216) is specifically designed for all standard-barrel Ruger 10/22 rifles. If you own any of the following .22LR models, this stock is a direct-fit upgrade: - Ruger 10/22 Carbine — The classic workhorse. This semi-auto .22LR is the most popular rimfire rifle in American history, and it’s the primary fit for the Strikeforce GEN2 stock. - Ruger 10/22 Sporter — Features a curved pistol grip and a slightly more elegant profile, but fully compatible with ATI’s aftermarket stock system. - Ruger 10/22 Tactical — Ships from the factory with a more modern aesthetic, making it a natural pairing with the Strikeforce GEN2 upgrade. *Note: The Strikeforce TactLite GEN2 Stock is not compatible with bull barrel configurations. Always verify your barrel profile before ordering.* ## **ATI Outdoors Strikeforce GEN2 Stock — C.2.10.1216 Overview** The ATI Outdoors Strikeforce GEN2 Stock (C.2.10.1216) is a comprehensive stock system engineered to modernize the Ruger 10/22 platform. Made in the USA and backed by ATI’s Limited Lifetime Warranty, this stock is constructed from extreme-temperature glass-reinforced polymer — a material that withstands heat, cold, and rough field conditions without warping or cracking. **Key Features Include:** - TactLite GEN2 Six-Position Adjustable Stock — Allows shooters to dial in their length of pull for a precise, comfortable fit regardless of body type or gear worn. - Side-Folding Mechanism — The stock folds to the left of the receiver, making storage and transport far more compact. Critically, the rifle can still be fired from the folded position. - TracLock GEN2 System — Eliminates wobble and horizontal/vertical play, delivering a rock-solid stock-to-receiver connection without secondary locking hardware. - Three Forward Picatinny Rail Locations — Mount lights, lasers, grips, or bipods with ease using the included 2-inch and 4-inch rail sections. - X1 Pistol Grip — Sure-grip texturing and ergonomic shaping reduce felt recoil and improve weapon control. - X Series Thin Recoil Pad — Removable and non-slip, this pad adds comfort during extended shooting sessions. - Removable Adjustable Cheek Rest — Offers a customizable cheek weld for improved sight alignment, particularly useful when running optics. - Dual-Sided QD Sling Swivel Points — Compatible with push-button quick-detach sling swivels for fast, secure sling attachment on either side. - Extra Ventilation in Forend and Top Cover — Improves heat dissipation and reduces overall weight while maintaining structural integrity. ## Available Color Options The ATI Outdoors Strikeforce GEN2 Stock is available in four distinct finishes to match your rifle’s aesthetic or operational environment: - Black (C.2.10.1216) — The classic tactical finish. Timeless, low-visibility, and compatible with virtually any accessory color scheme. - Flat Dark Earth (C.2.20.1216) — A warm, desert-inspired tan finish favored for its field versatility and modern tactical aesthetic. - Destroyer Gray (C.2.40.1216) — A cool, neutral gray that pairs well with stainless steel receivers and barrels for a sleek, contemporary look. - Urban Combat (C.2.50.1216) – ATI’s latest color option. All three finishes are made from the same high-quality glass-reinforced polymer and offer identical performance characteristics — the choice is purely aesthetic. ## Upgrade Your .22LR Rifle Today The .22LR platform has never been more capable than it is today, and the ATI Outdoors Strikeforce GEN2 Stock is a big reason why. By replacing a factory wood or basic synthetic stock with the Strikeforce system, Ruger 10/22 owners gain a fully adjustable, accessory-ready, folding-stock platform that rivals the ergonomics of far more expensive tactical rifles. With a retail price point that makes it one of the best value upgrades in the rimfire world, and the assurance of ATI’s American craftsmanship and lifetime warranty, there’s never been a better time to give your .22LR rifle the tactical makeover it deserves. Visit atioutdoors.com to browse the full Strikeforce GEN2 lineup and choose the color that fits your style. **Categories:** .22 cal --- ### [Carbine Length AR-15: Gas System Guide, Pros, Cons & Best Builds (2026)](https://www.atioutdoors.com/carbine-length-ar-15-gas-system-guide-pros-cons-best-builds-2026/) **Published:** March 26, 2026 **Author:** msarver **Content:** # Carbine Length AR-15: What It Is, How It Works, and Whether It’s Right for You If you’ve spent any time researching the AR-15 platform, you’ve likely come across the term “carbine length” — and for good reason. The carbine length AR-15 gas system is one of the most widely used configurations in the country, found on everything from entry-level builds to duty rifles carried by law enforcement. But what exactly does carbine length mean, how does it affect performance, and is it the best choice for your 16-inch AR-15 build? This guide breaks it all down. ## What Is a Carbine Length Gas System on an AR-15? The carbine length gas system refers to the distance between the barrel’s gas port and the front face of the upper receiver — approximately 7 inches. This tube channels propellant gases from the fired round back into the action to cycle the bolt carrier group (BCG) and chamber the next round. There are four main AR-15 gas system lengths: pistol (~4”), carbine (~7”), mid-length (~9”), and rifle-length (~12”). Each is designed to match specific barrel lengths. The carbine length gas system pairs most commonly with 14.5-inch and 16-inch barrels — the two most popular barrel lengths for general-purpose AR-15 builds. For civilians, the 16-inch carbine configuration is the go-to choice, keeping the rifle legal in all 50 states without requiring an NFA Short Barreled Rifle (SBR) tax stamp. ## Carbine Length vs Mid-Length AR-15: What’s the Difference? The carbine vs mid-length debate is one of the most common questions among AR-15 builders, and for good reason. The mid-length gas system taps gas approximately 2 inches further down the barrel, at a point where chamber pressure is lower. The result is a softer, slower recoil impulse — often described as a smoother “push” rather than the sharper “thump” characteristic of carbine length systems. The carbine length system, however, has a key advantage: it produces higher pressure cycling, making it more reliable in adverse conditions, with dirty ammunition, or when running suppressed. That reliability is a big reason why the M4 carbine — the military’s standard-issue rifle — has always used a carbine length gas system on its 14.5-inch barrel. ## Best Uses for a Carbine Length AR-15 The carbine length AR-15 is an excellent choice for a wide range of applications. For home defense, a 16-inch carbine in 5.56 NATO or .223 Remington delivers reliable terminal performance in a compact, easy-to-handle package. For 3-gun competition and tactical shooting sports, the platform’s quick pointability and light weight make it a natural fit. As a general range rifle for new and experienced shooters alike, it’s hard to beat. The carbine length setup also shines in shorter-barrel builds (10” to 14.5”), where it outperforms mid-length systems in reliability. If you’re building an AR-15 pistol or SBR, or if you plan to run a suppressor and need reliable cycling under increased back pressure, carbine length is often the better call over mid-length in those configurations. ## Carbine Length AR-15 Pros and Cons **Pros:** - Extremely reliable cycling, even in harsh conditions - Military-proven design (M4 carbine heritage) - Widest aftermarket availability of any AR-15 gas system length - Best suited for 10”–14.5” barrels and suppressed builds - Compatible with standard carbine buffer systems and most adjustable stocks **Cons:** - Sharper recoil impulse (“carbine thump”) compared to mid-length or rifle-length systems - Higher bolt carrier group and buffer wear over time - More gas blowback when running a suppressor vs mid-length - Not ideal on 16”+ barrels where mid-length would provide smoother operation ## How to Reduce Recoil on a Carbine Length AR-15 If you’re running a carbine length gas system and want a smoother shooting experience, there are several effective upgrades. Swapping to a heavier carbine buffer — an H or H2 buffer — slows the bolt carrier group’s rearward travel, reducing that sharp recoil snap. Installing an adjustable gas block lets you dial in gas flow precisely, reducing over-gassing and wear on your BCG. Many shooters also upgrade to the VLTOR A5 buffer system, which splits the difference between carbine and rifle-length buffer setups for a noticeably smoother impulse. ## Is a Carbine Length AR-15 Right for You? For most AR-15 owners, a carbine length gas system paired with a 16-inch barrel remains a proven, capable, and cost-effective configuration. It offers unmatched parts availability, decades of battlefield-proven reliability, and flexibility across a wide range of shooting applications. The trade-offs in recoil and component wear are real, but easily managed with the right buffer and maintenance habits. If you’re building for home defense, competition, range use, or a first AR-15, the carbine length platform continues to deliver exactly what most shooters need. **Categories:** AR --- ### [Discover the most popular AK rifle variations. Upgrade your stamped-receiver AK.](https://www.atioutdoors.com/discover-the-most-popular-ak-rifle-variations-upgrade-your-stamped-receiver-ak/) **Published:** March 26, 2026 **Author:** msarver **Content:** # AK Rifle Variations: A Complete Guide to the World’s Most Versatile Rifle Platform The AK-47 and its many derivatives remain among the most recognizable and widely owned semi-automatic rifles in the United States. Whether you’re a first-time buyer, a seasoned collector, or a shooter looking to upgrade your setup, understanding the different AK rifle variations is essential to making the right choice — and getting the most out of your firearm. In this guide, we’ll break down the most popular AK rifle variants, explore what sets each one apart, and highlight how the ATI Outdoors Strikeforce TactLite GEN2 Stock & Forend Package (SKU: C.2.10.1250) can transform your AK build into a modern tactical powerhouse. ## Why AK Rifles Remain So Popular Few rifles in history have achieved the longevity and global reach of the AK platform. Originally designed by Mikhail Kalashnikov in 1947, the AK-47 was engineered for reliability, simplicity, and ease of use under harsh conditions. Decades later, those qualities continue to make AK-pattern rifles a top choice for home defense, range shooting, and hunting in states that permit it. In the U.S. market, AK-style semi-automatic rifles are produced by a wide range of manufacturers. Understanding the key variants helps shooters select the right platform — and the right AK rifle accessories — for their needs. ## The Core AK Variants You Should Know **AK-47 (7.62x39mm) — The Original Standard** The AK-47 chambered in 7.62x39mm is the foundation of the entire platform. This cartridge delivers hard-hitting performance at intermediate ranges, making it a popular choice for home defense and recreational shooting. Most stamped-receiver AK-47s on the U.S. market — including models from Century Arms, PSAK-47, and others — share the same basic receiver dimensions, which is critical for aftermarket furniture compatibility. **AKM — The Improved Evolution** The AKM is the modernized successor to the original AK-47, featuring a stamped steel receiver rather than a milled one. This makes it lighter and less expensive to produce. The vast majority of civilian AK-pattern rifles sold in the U.S. are AKM-pattern, meaning accessories and furniture designed for the AK-47 typically fit AKM receivers as well. **AK-74 (5.45x39mm) — The High-Velocity Option** The AK-74 was developed in the 1970s as a lighter, flatter-shooting alternative to the 7.62x39mm AKM. Chambered in 5.45x39mm, this variant offers reduced recoil and a flatter trajectory. U.S. semi-automatic versions like the VEPR and various Century Arms builds have found a dedicated following among shooters seeking accuracy at distance. **Draco & Micro Draco — Pistol-Configuration AKs** The Draco and Micro Draco pistol-configuration AKs have exploded in popularity in recent years. Built on AKM-pattern receivers with shorter barrels and no rifle stock, these firearms offer compact maneuverability. Many owners add braces or upgrade their furniture for ergonomic improvements. **WASR-10 — The Everyday AK** The Century Arms WASR-10 is arguably the best-selling AK-pattern rifle in the U.S. Its stamped receiver, reliable gas-piston operation, and affordable price point make it an excellent candidate for furniture upgrades. Shooters looking to improve ergonomics, adjustability, and aesthetics frequently turn to aftermarket stock packages as their first modification. ## Upgrade Your AK with the ATI Strikeforce TactLite GEN2 Package (C.2.10.1250) No matter which AK variant you own, one of the most impactful upgrades you can make is replacing the factory furniture with a modern, purpose-built stock and forend package. The ATI Outdoors Strikeforce TactLite GEN2 Stock & Forend Package (SKU: C.2.10.1250) is engineered specifically for stamped-receiver AK-47 and AKM-pattern rifles — covering the most popular models on the U.S. market. Here’s what makes the C.2.10.1250 stand out among AK rifle upgrades: - **Six-Position Adjustable Side-Folding Stock:** The TactLite GEN2 stock folds to the left side of the receiver and features six length-of-pull positions, making it adaptable for shooters of all sizes — and it can be fired from the folded position. - **TracLock GEN2 System:** Eliminates horizontal and vertical stock movement on the buffer tube, delivering a rock-solid lockup without secondary locking mechanisms. - **Ventilated Forend:** The included TactLite forend keeps your hands cool during sustained shooting sessions while offering a modern profile. - **X2 Recoil-Reducing Pistol Grip:** Specifically designed to absorb recoil impulse, reducing shooter fatigue and improving follow-up shot speed. - **Dual QD Sling Attachment Points:** Dual-sided quick-detach attachment points allow easy sling configuration for any shooting style. - **Made in the USA:** Every component is manufactured domestically, contributing toward 922(r) compliance parts counts. The C.2.10.1250 package is designed to fit most stamped AK rifles, including the WASR-10, PSAK-47, and other AKM-pattern platforms. Some minor fitting may be required depending on your specific build — a common characteristic of aftermarket AK furniture given the variance in production tolerances across manufacturers. ## Which AK Variants Are Compatible? The ATI C.2.10.1250 is compatible with stamped-receiver AK-47 and AKM-pattern rifles. This includes some of the most popular models in the U.S.: - Century Arms WASR-10 - Palmetto State Armory PSAK-47 (GF3 and standard stamped models) - O. Inc. AKM-pattern rifles - DDI (Destructive Devices Industries) AK-47 - Most other stamped-receiver AKM-pattern imports and domestic builds Note: Milled-receiver AKs (such as those by Arsenal or some vintage imports) may require different furniture. Always verify compatibility with your specific receiver type before ordering. ## Final Thoughts: Modernize Your AK Platform Whether you’re running a classic WASR-10, a modern PSAK-47, or any other stamped AK-pattern rifle, upgrading your furniture is one of the most cost-effective ways to improve your shooting experience. The ATI Outdoors Strikeforce TactLite GEN2 Package (C.2.10.1250) brings adjustability, recoil management, and American-made quality to a platform that has stood the test of time. Ready to upgrade? Visit atioutdoors.com to order the Strikeforce TactLite GEN2 Stock & Forend Package and explore the full lineup of AK-47 stocks, grips, and accessories designed for today’s shooter. **Categories:** AK, AK --- ### [The Ultimate Guide to AK Rifle Variations: From AK-47 to AK-12](https://www.atioutdoors.com/the-ultimate-guide-to-ak-rifle-variations-from-ak-47-to-ak-12/) **Published:** March 26, 2026 **Author:** msarver **Content:** **The Ultimate Guide to AK Rifle Variations: From AK-47 to AK-12** The AK-47 is more than just a firearm; it is a global cultural icon and a marvel of industrial engineering. Designed by Mikhail Kalashnikov to be “soldier-proof,” this platform was built for simplicity, durability, and devastating reliability. While the term “AK-47” is often used as a catch-all, the platform has evolved significantly over eight decades. If you are a collector, a history buff, or a tactical shooter, understanding the variations of the AK rifle is essential. From the milled receivers of the 1950s to the modernized AK-12, here is the definitive breakdown of the Kalashnikov lineage. 1. **The Original AK-47 (Type 1, 2, and 3)** The early history of the Kalashnikov rifle is defined by a search for manufacturing efficiency. Chambered in the iconic 7.62x39mm cartridge, the original design went through three distinct “Types” during its initial adoption by the Soviet Union. - Type 1: Featured a stamped receiver. While innovative, the Soviet technology of 1947 struggled with heat treatment and durability, leading to high rejection rates and a temporary halt in production. - Type 2 & 3: The Soviets pivoted to a milled receiver, machined from a solid block of steel. Type 2 rifles are identified by a steel socket for the buttstock, while Type 3 (the most common milled variant) simplified this with a direct-attach stock. These rifles are heavier and more “overbuilt” than modern versions, prized by collectors for their smooth actions and historical significance. 2. **The Global Standard: The AKM** In 1959, the Soviet Union perfected the design with the AKM (*Avtomat Kalashnikova Modernizirovanniy*). This is the version most people recognize today. By returning to a stamped steel receiver using improved riveting techniques, the AKM became significantly lighter and much cheaper to mass-produce. It introduced several hallmark features: - **Slanted Muzzle Brake:** This iconic attachment directs gases upward and to the right to counter muzzle climb during rapid fire. - **Hammer Retarder:** A mechanical addition to the trigger group that ensures the bolt is fully closed before the hammer strikes, improving consistency. - **Ribbed Dust Cover:** Added for structural rigidity to the thinner stamped metal. The AKM is the most widely cloned firearm in history, serving as the blueprint for “AK-47” rifles found in every corner of the globe. 3. **The High-Velocity Shift: The AK-74** During the Vietnam War, the Soviets observed the effectiveness of the American small-caliber, high-velocity 5.56mm round. In response, they developed the AK-74, chambered in 5.45x39mm. This move marked a major doctrinal shift in Soviet small arms. The AK-74 brought several key upgrades: - **Reduced Recoil:** The smaller cartridge and a massive, two-chamber muzzle brake made the rifle incredibly flat-shooting, allowing for better accuracy during follow-up shots. - **Polymer Components:** Traditional wood was eventually replaced with “Plum” or “Bakelite” polymers, reducing weight and resisting rot in humid environments. - **The AKS-74U:** Known colloquially as the “Krinkov,” this shortened carbine featured a folding stock and a unique conical flash hider. It was designed for special forces (Spetsnaz) and vehicle crews who needed compact firepower. 4. **International Variations: The AK Family Tree** Because the Soviet Union shared its technical data packages with Warsaw Pact allies, different nations developed unique AK rifle variants tailored to their specific needs. **Country****Model****Unique Feature****China**Type 56Features a folding “spike” bayonet and a fully hooded front sight.**Yugoslavia**Zastava M70Known for a “bulged” RPK-style trunnion and three-slot handguards for extreme durability.**Romania**WASR / PM md. 63Famous for the “donkey dong” vertical wooden forward grip and high export availability.**Israel**GalilA modernized AK chambered in 5.56 NATO, featuring a side-charging handle and a bottle opener.**Hungary**AMD-65A compact variant with a unique muzzle brake and forward vertical grip for paratroopers.5. **Modern Innovations: The AK-100 Series and AK-12** In the 1990s, the Izhmash factory sought to streamline production for the export market, creating the AK-100 series. These rifles used black glass-filled polyamide furniture and standardized parts across different calibers. - **AK-101 & AK-102:** Chambered in 5.56x45mm NATO, designed specifically for international sales. - **AK-103:** The modern 7.62mm evolution, combining the classic “punch” of the original AK with modern polymer durability and side-folding stocks. - **AK-105:** A shortened 5.45mm carbine meant to bridge the gap between the full-size rifle and the Krinkov, offering better ballistics than the shorter AKS-74U. Today, the Russian Federation has officially adopted the AK-12. This rifle finally brings the AK platform into the 21st century. It features integrated Picatinny rails for optics and lasers, an adjustable telescoping stock, and a simplified gas tube. Crucially, the AK-12 uses a free-floated handguard, which prevents pressure on the barrel and significantly improves accuracy over legacy models. **Why the AK Platform Remains Relevant** The enduring popularity of the AK platform boils down to reliability and ease of use. Unlike the tight tolerances of the AR-15, which require regular cleaning and lubrication, the AK is designed with generous clearances between moving parts. This “loose” fit allows the rifle to cycle even when filled with mud, sand, or heavy carbon buildup. The over-gassed long-stroke piston system ensures that the bolt carrier group has more than enough kinetic energy to clear obstructions. From the jungles of Southeast Asia to modern tactical ranges in the United States, the AK remains a symbol of rugged utility. Whether you prefer the classic aesthetics of a wood-stocked AKM or the modularity of an AK-12, the Kalashnikov remains the world’s most resilient battle rifle. **Categories:** AK, AK --- ### [AR15 Pistol Defined and Accessories](https://www.atioutdoors.com/ar15-pistol-defined-and-accessories/) **Published:** March 26, 2026 **Author:** msarver **Content:** The AR15 pistol has become one of the most popular and versatile firearms in the modern market. Combining the iconic AR15 platform with a compact, short-barreled configuration, the AR pistol offers shooters a highly maneuverable firearm without the legal requirements tied to a short-barreled rifle (SBR). Whether you’re building your first AR-15 pistol build or shopping for the best complete option, this guide covers everything you need to know. **What Is an AR-15 Pistol?** An AR pistol is legally defined by the ATF as a pistol-configuration firearm built on the AR15 lower receiver with a barrel under 16 inches and no rifle stock. Instead of a traditional stock, most AR15 pistols are equipped with a pistol brace — also known as an AR pistol stabilizing brace — which allows one-handed operation. This classification keeps the firearm outside the National Firearms Act (NFA) requirements that apply to SBRs, making ownership simpler in most states. **⚠ Legal Note** Always verify your state and local laws before purchasing or building an AR15 pistol. Regulations on pistol braces, magazine capacity, and barrel length vary significantly by jurisdiction. **Best AR-15 Pistol Calibers** One major advantage of the AR pistol platform is caliber versatility. The most common chambering is 5.56 NATO / .223 Remington, but many shooters also build or buy AR pistols in 300 Blackout, which is optimized for short barrels and suppressor use. Other popular options include .223 Wylde for enhanced accuracy, 7.62x39mm for AK-style ballistics, and 9mm AR pistols that use pistol-caliber carbine (PCC) setups with Glock or Colt-pattern magazines. *The AR-15 pistol platform gives you SBR performance without the paperwork — and the flexibility to run nearly any caliber.* **Key Components of an AR Pistol Build** If you’re planning a custom AR pistol build, the components that matter most include your AR pistol upper receiver, pistol-length or carbine-length gas system, and a quality pistol barrel — typically between 7.5 and 10.5 inches for 5.56 AR pistols. Pair that with a pistol lower receiver (never previously registered as a rifle), a pistol buffer tube, and your chosen brace for AR pistol. Free-float M-LOK handguards are the go-to choice for modularity and heat management. **Top AR-15 Pistol Brands** The market for AR15 pistols for sale is extensive. Leading brands include Daniel Defense, Palmetto State Armory (PSA), Aero Precision, BCM (Bravo Company), and Sig Sauer. For budget-friendly AR pistol kits, PSA offers some of the best value, while Daniel Defense and BCM lead the premium segment for mil-spec AR pistols. **Why Choose an AR Pistol?** The AR15 pistol delivers exceptional home defense capability, makes an excellent truck gun, and provides a lightweight, compact option for range use and 3-gun competition. Its modularity means you can swap uppers for different AR pistol calibers, making it one of the most adaptable platforms available. For shooters who want SBR performance without an NFA tax stamp, the AR pistol remains the top choice in 2026. **How can ATI Outdoors help you with your Build?** **PN: A.5.10.2342** **ATI X2 Recoil Pistol Grip** The ATI X2 Recoil Pistol Grip is engineered from the ground up to tame felt recoil and improve shooter control on the AR15 and AR10 platform. Its signature soft rubber overmold absorbs the initial shock wave of each shot, directly reducing muzzle lift and keeping follow-up shots faster and more accurate. Grip geometry is where the X2 truly separates itself. Specifically engineered dimensions establish the optimal distance from grip to trigger, fitting a wide range of hand sizes naturally. The vertical angle encourages a natural wrist position, while the raised rear tang provides consistent hand placement shot after shot — a key advantage for shooters wearing body armor or running a fully collapsed stock. A curved base further reduces impact transferred through the web of the thumb. Built from DuPont Extreme Temperature Glass-Reinforced Polymer, the X2 Scorpion is both scratch-resistant and weatherproof, holding up in harsh field conditions. Compatible with most AR-15, AR-10, M4, M16, M110, and SR-25 platforms — as well as the Ruger 22 Charger Pistol — and installs with the factory grip screw and washer. Backed by ATI’s Limited Lifetime Warranty. **PN: A.5.10.2518** **ATI AR-15 Pistol Buffer Tube Assembly** The ATI AR-15 Pistol Buffer Tube Assembly is the foundation of any proper AR pistol build. Machined from 6061 T6 aluminum, this pistol-specific buffer tube is built to mil-spec tolerances, offering the structural rigidity and consistent fitment that an AR pistol demands. Unlike rifle-length buffer tubes, the pistol buffer tube configuration keeps your build legally compliant as an AR pistol. Finished in classic black, this assembly pairs the clean look of an ATI-quality component with the durability needed for hard use. **Categories:** AR --- ### [Upgrade Your Shotgun Game: T3 GEN2 Shotgun Stock](https://www.atioutdoors.com/upgrade-your-shotgun-game-t3-gen2-shotgun-stock/) **Published:** March 26, 2026 **Author:** msarver **Content:** **Upgrade Your Shotgun Game: A Deep Dive into the ATI Outdoors T3 GEN2 Shotgun Stock** The ATI Edge has always been about pushing firearm accessories further than the competition — better materials, smarter engineering, and designs that work as hard as the shooter behind the trigger. The T3 GEN2 Shotgun Stock (SKU: C.1.10.2007) is a prime example of that philosophy in action. This is ATI’s Mossberg/Remington/Savage/Winchester/TriStar 12-Gauge T3 GEN2 Adjustable TactLite Shotgun Stock with X2 Recoil Reducing Grip and Butt-Pad — and it delivers on every one of those promises. Whether you’re a home defender, a tactical shooter, or just someone who wants a more comfortable and customizable rig, the T3 GEN2 has earned a loyal following for good reason. **Built for Adaptability** One of the T3 GEN2 Shotgun Stock’s biggest selling points is how well it fits a wide range of popular shotguns right out of the box. It is compatible with the Mossberg 500/535/590/835 in both 12ga and 20ga (proud fit), the Maverick 88 in 12ga and 20ga, the Remington 870/887 12ga, and the Winchester SXP 12ga — covering some of the most common and trusted pump-action platforms on the market today. For those using a Winchester 1200/1300 in 12ga or 20ga, an additional adaptor is required. SXP models from 2021 and newer will need a minor modification to the adaptor before assembly, while SXP models from 2020 and older require no modification at all. **The ATI Insight: TracLOCK GEN2 System** Here’s what truly separates a great adjustable stock from a mediocre one: stability. Wobble, rattle, and unwanted play aren’t just annoyances — they degrade accuracy and erode shooter confidence. The TracLOCK GEN2 system solves this completely. It provides smooth, secure adjustments, eliminates horizontal and vertical movement of the stock on the buffer tube, and removes the need for secondary locking mechanisms. Anyone who has dealt with a sloppy aftermarket stock before will immediately appreciate just how solid and purposeful this feels. The system also features dual-sided QD attachment points with no snag points, making it easy to run a push-button QD sling swivel without fumbling or catching on gear in the field. **Zeroed In on Customizable Fit** The TactLite GEN2 features a 6-position adjustable Mil-Spec stock, with a length of pull ranging from 13.125 inches to 16.625 inches. This generous range of adjustment means the stock works well for shooters of virtually every body type — from smaller-framed users to those who need maximum extension. Whether you’re shooting in a bulky winter jacket or a t-shirt on a hot summer range day, dialing in the perfect fit takes only seconds. **X Series Recoil Reduction: Shoot More, Hurt Less** Shotgun recoil is no joke, especially when running heavier loads or putting a lot of rounds downrange in a single session. The ATI Edge shines here with a two-pronged recoil management system that goes well beyond what most competitors offer. The X Series pistol grip features a slim ergonomic design with a built-in recoil-absorbing backstrap and sure-grip texture for enhanced control. It helps dampen the initial impulse of the shot, while the sure-grip texture keeps your hand firmly in place rather than shifting and fatiguing over time. Then there’s the X2 Butt-Pad. The upgraded 1¼-inch thick pad absorbs recoil impact, reduces muzzle lift, and eliminates the felt punch of the recoil — allowing you to shoot any load size with no pain transfer to the shooter. It is also not affected by chemicals or extreme temperatures, a detail that matters more than many shooters realize. A butt-pad that hardens in the cold or degrades with solvent contact is a liability; the X2 pad holds up in real-world conditions without compromise. **Adjustable Cheek Rest and Easy Installation** A removable cheek piece offers half an inch of vertical adjustment with an elongated design to fit all users, ensuring an ideal sight picture regardless of setup. This is especially valuable for shooters running optics or raised sighting systems on their shotguns. Installation requires no specialized tools, with mounts included for all supported models in one package and all mounting hardware provided. Most owners report getting from box to range-ready in under 30 minutes. **The Bottom Line** The ATI Outdoors T3 GEN2 Shotgun Stock is one of the most complete and well-executed aftermarket stock systems available for popular pump-action shotguns. From the TracLOCK GEN2 stability system to the X2 recoil pad, every feature reflects deliberate, practical engineering that improves the shooting experience without unnecessary complexity. And with ATI Insight built into every design decision, you’re not just buying a stock upgrade; you’re investing in a platform that grows with your needs. Available in Black (C.1.10.2007), Flat Dark Earth (C.1.20.2007), Destroyer Gray (C.1.40.2007), and Urban Combat (C.1.50.2007). **Categories:** Additional Shotguns, Mossberg, Remington, Winchester --- ## Pages ### [ATI Outdoors | Firearms Parts & Accessories](https://www.atioutdoors.com/) **Published:** September 13, 2021 **Author:** John Chvala **Content:** ##### Free Shipping On Orders Over $50 ![ATI Outdoors firearm stocks and accessories](https://www.atioutdoors.com/wp-content/uploads/2026/06/ATI-Main-Hero-Image-3.0.webp) ##### Free Shipping\* On Orders Over $50 ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Mobile-Hero-2.webp) #### TOP CATEGORIES [ ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Rifle-Cat-Main-600x800.webp) ](https://www.atioutdoors.com/product-category/rifles/) ### Rifles [ 0 products ](https://www.atioutdoors.com/product-category/rifles/) [](https://www.atioutdoors.com/product-category/rifles/) [ ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Ati-Shot-gun-cat-600x800.webp) ](https://www.atioutdoors.com/product-category/shotguns/) ### Shotguns [ 0 products ](https://www.atioutdoors.com/product-category/shotguns/) [](https://www.atioutdoors.com/product-category/shotguns/) [ ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Pistol-Cat-Main-600x800.webp) ](https://www.atioutdoors.com/product-category/handguns/) ### Handguns [ 0 products ](https://www.atioutdoors.com/product-category/handguns/) [](https://www.atioutdoors.com/product-category/handguns/) [ ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Accessories-Cat-Main-600x800.webp) ](https://www.atioutdoors.com/product-category/accessories/) ### Accessories [ 0 products ](https://www.atioutdoors.com/product-category/accessories/) [](https://www.atioutdoors.com/product-category/accessories/) FEATURED PRODUCTS #### GEAR THAT GETS IT DONE [ ![](https://www.atioutdoors.com/wp-content/uploads/2025/04/a.5.10.2551-combo-1300x597.jpg) ](https://www.atioutdoors.com/product/gen2-halo-aluminum-side-saddle-2/) Hot ![Gen2 Halo Aluminum Side Saddle-11376](https://www.atioutdoors.com/wp-content/uploads/2013/12/a.5.10.2551-off-angle-right-1024x611.jpg) ### [Gen2 Halo Aluminum Side Saddle](https://www.atioutdoors.com/product/gen2-halo-aluminum-side-saddle-2/) [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/accessories-and-parts-1-maverick/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/accessories-and-parts-1-mossberg/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/winchester/sxp/accessories-parts-1-sxp/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/870/accessories-and-parts-1-870/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-12ga-shockwave/accessories-parts-mossberg-12ga-shockwave/), [Side Saddle & Add-a-Shell](https://www.atioutdoors.com/product-category/shotguns/remington/870/side-saddle-add-a-shell/), [Side-Saddle](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/side-saddle/), [Side-Saddle](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/side-saddle-1/), [Side-Saddle & Shell Holders](https://www.atioutdoors.com/product-category/accessories/side-saddle-shell-holders/) $74.99 Rated **4.88** out of 5 ATI Outdoors [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Add to cart](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=e91d30f382&add-to-cart=4574) [ Quick view ](https://www.atioutdoors.com/product/gen2-halo-aluminum-side-saddle-2/) [ ![Marlin Fiberforce Stock - Black](https://www.atioutdoors.com/wp-content/uploads/2011/12/mar3000_1-1024x512.png) ](https://www.atioutdoors.com/product/fiberforce-marlin-stock/) Hot ![Marlin Fiberforce Stock - Black](https://www.atioutdoors.com/wp-content/uploads/2011/12/mar3000_1-1024x512.png) ![](https://www.atioutdoors.com/wp-content/uploads/2025/06/Marlin-BLK-430x430.png) Black ![](https://www.atioutdoors.com/wp-content/uploads/2025/06/A.2.50.1280b-URBAN-430x430.png) Urban Combat ![](https://www.atioutdoors.com/wp-content/uploads/2025/06/A.2.20.1280b-FDE-3-430x430.png) FDE (Flat Dark Earth) ### [Fiberforce Marlin Stock](https://www.atioutdoors.com/product/fiberforce-marlin-stock/) [Stocks](https://www.atioutdoors.com/product-category/rifles/marlin/stocks-1-marlin/) $69.99 Rated **4.78** out of 5 Made in the USA [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Select options](https://www.atioutdoors.com/product/fiberforce-marlin-stock/) This product has multiple variants. The options may be chosen on the product page [ Quick view ](https://www.atioutdoors.com/product/fiberforce-marlin-stock/) [ ![AR-15](https://www.atioutdoors.com/wp-content/uploads/2011/12/122-233-thickbox.jpg) ](https://www.atioutdoors.com/product/military-buffer-tube-assembly/) Hot ![](https://www.atioutdoors.com/wp-content/uploads/2025/01/Military-Buffer-Tube.jpg) ### [AR-15 Military Buffer Tube Assembly](https://www.atioutdoors.com/product/military-buffer-tube-assembly/) [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-15/accessories-and-parts-1-ar-15/) $63.99 Rated **5.00** out of 5 AR-15 Military Buffer Tube Assembly [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Add to cart](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=e91d30f382&add-to-cart=3472) [ Quick view ](https://www.atioutdoors.com/product/military-buffer-tube-assembly/) [ ![](https://www.atioutdoors.com/wp-content/uploads/2024/01/C.2.10.2212-web.png) ](https://www.atioutdoors.com/product/tactlite-mil-spec-stock/) Hot ![](https://www.atioutdoors.com/wp-content/uploads/2024/01/C.2.10.2212-and-C.2.10.2214-web-rt.png) ![](https://www.atioutdoors.com/wp-content/uploads/2024/01/C.2.10.2212-web-430x430.png) Black ![](https://www.atioutdoors.com/wp-content/uploads/2024/01/C.2.20.2212-WEB-430x430.png) FDE (Flat Dark Earth) ![](https://www.atioutdoors.com/wp-content/uploads/2024/01/C.2.40.2212-web-430x430.png) Destroyer Gray ### [TactLite GEN2 AR-15 / AR-10 Mil-Spec Stock](https://www.atioutdoors.com/product/tactlite-mil-spec-stock/) [Stocks](https://www.atioutdoors.com/product-category/rifles/ar-10/stocks-1-ar-10/), [Stocks](https://www.atioutdoors.com/product-category/rifles/ar-15/stocks-1-ar-15/) $48.99 Rated **4.79** out of 5 Made in the USA [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Select options](https://www.atioutdoors.com/product/tactlite-mil-spec-stock/) This product has multiple variants. The options may be chosen on the product page [ Quick view ](https://www.atioutdoors.com/product/tactlite-mil-spec-stock/) [ ![AR-15 .223/5.56 Steel Shark Muzzle Brake w/Crush washer-0](https://www.atioutdoors.com/wp-content/uploads/2018/04/a.5.10.2251-1024x728.jpg) ](https://www.atioutdoors.com/product/ar-15-223-5-56-steel-shark-muzzle-brake-w-crush-washer/) Hot ![AR-15 .223/5.56 Steel Shark Muzzle Brake w/Crush washer-0](https://www.atioutdoors.com/wp-content/uploads/2018/04/a.5.10.2251-1024x728.jpg) ### [AR-15 Steel Shark Muzzle Brake – Recoil Reduction](https://www.atioutdoors.com/product/ar-15-223-5-56-steel-shark-muzzle-brake-w-crush-washer/) [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-15/accessories-and-parts-1-ar-15/), [Forend Accessories](https://www.atioutdoors.com/product-category/rifles/ar-15/forend-accessories/), [Parts](https://www.atioutdoors.com/product-category/accessories/parts/) $35.99 Rated **5.00** out of 5 ATI Outdoors [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Add to cart](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=e91d30f382&add-to-cart=5466) [ Quick view ](https://www.atioutdoors.com/product/ar-15-223-5-56-steel-shark-muzzle-brake-w-crush-washer/) [ ![AR-15 T2 Scorpion Recoil Pistol Grip](https://www.atioutdoors.com/wp-content/uploads/2013/12/a.5.10.2343_5-1024x512.png) ](https://www.atioutdoors.com/product/x2-pistol-grip-2/) Hot ![AR-15 T2 Scorpion Recoil Pistol Grip](https://www.atioutdoors.com/wp-content/uploads/2013/12/a.5.10.2343_5-1024x512.png) ![AR-15 T2 Pistol Grip - Black](https://www.atioutdoors.com/wp-content/uploads/2013/12/a.5.10.2342_left_grip-430x215.png) Black ![AR-15 X2 Scorpion Recoil Pistol Grip](https://www.atioutdoors.com/wp-content/uploads/2013/12/a.5.20.2343_1-430x215.png) FDE (Flat Dark Earth) ![AR-15 X2 Scorpion Recoil Pistol Grip](https://www.atioutdoors.com/wp-content/uploads/2013/12/a.5.40.2343_1-430x215.png) Destroyer Gray ### [X2 AR-15 / AR-10 Grip](https://www.atioutdoors.com/product/x2-pistol-grip-2/) [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-15/accessories-and-parts-1-ar-15/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-10/accessories-and-parts/), [Grips](https://www.atioutdoors.com/product-category/rifles/ar-10/grips-1/), [Grips](https://www.atioutdoors.com/product-category/rifles/ar-15/grips-1-ar-15/), [Parts](https://www.atioutdoors.com/product-category/accessories/parts/) $29.99 Rated **4.91** out of 5 Made in the USA [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Select options](https://www.atioutdoors.com/product/x2-pistol-grip-2/) This product has multiple variants. The options may be chosen on the product page [ Quick view ](https://www.atioutdoors.com/product/x2-pistol-grip-2/) [ ![Forend Pistol Grip](https://www.atioutdoors.com/wp-content/uploads/2011/12/159-2790-thickbox.jpg) ](https://www.atioutdoors.com/product/forend-pistol-grip-3/) Hot ![Forend Pistol Grip](https://www.atioutdoors.com/wp-content/uploads/2011/12/159-2790-thickbox.jpg) ### [Forend Pistol Grip, FPG](https://www.atioutdoors.com/product/forend-pistol-grip-3/) [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/mosin-nagant/accessories-and-parts-1-mosin-nagant/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/czusa/accessories-1-czusa/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/rossi/accessories-1-rossi/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/saiga-1/accessories-1-saiga-1/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/savage-and-stevens/accessories-1/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/saiga/accessories-parts-1/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/sks/accessories-and-parts-1-sks/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/rossi-1/accessories-and-parts-1-rossi-1/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/marlin/accessories-and-parts-1-marlin/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/h-r-nef/accessories-and-parts-1-h-r-nef/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/hi-point/accessories-and-parts-1-hi-point/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/remington-7600/accessories-and-parts-1/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-10/accessories-and-parts/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ak-47/accessories-and-parts-1-ak-47/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/winchester/sxp/accessories-parts-1-sxp/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ruger/10-22/accessories-and-parts-1-10-22/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/winchester/1200-1300/accessories-parts-1-1200-1300/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/887/accessories-1-887/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/tristar/raptor/accessories-parts-1-raptor/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/1100-11-87/accessories-1-1100-11-87/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ruger/mini-14-thirty/accessories-and-parts-1-mini-14-thirty/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/accessories-and-parts-1-mossberg/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-15/accessories-and-parts-1-ar-15/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/accessories-and-parts-1-maverick/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/fnh-usa/accessories-parts-1-fnh-usa/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/mauser/accessories-and-parts-1-mauser/), [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/870/accessories-and-parts-1-870/), [Grips](https://www.atioutdoors.com/product-category/rifles/ar-15/grips-1-ar-15/), [Grips](https://www.atioutdoors.com/product-category/rifles/ar-10/grips-1/), [Grips](https://www.atioutdoors.com/product-category/rifles/ak-47/grips/), [Parts](https://www.atioutdoors.com/product-category/accessories/parts/) $24.99 Rated **4.85** out of 5 Made in the USA [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Add to cart](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=e91d30f382&add-to-cart=3580) [ Quick view ](https://www.atioutdoors.com/product/forend-pistol-grip-3/) [ ![](https://www.atioutdoors.com/wp-content/uploads/2025/04/LOP-Stock-Web-04.15.26.avif) ](https://www.atioutdoors.com/product/lop-quick-stop/) Hot ![](https://www.atioutdoors.com/wp-content/uploads/2024/11/LOP-Quick-Stop.png) ### [LOP Quick Stop](https://www.atioutdoors.com/product/lop-quick-stop/) [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-10/accessories-and-parts/), [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-15/accessories-and-parts-1-ar-15/), [Parts](https://www.atioutdoors.com/product-category/accessories/parts/), [Slings, Mounts & Adapters](https://www.atioutdoors.com/product-category/accessories/slings-mounts-adapters/), [Stocks](https://www.atioutdoors.com/product-category/rifles/ar-10/stocks-1-ar-10/), [Stocks](https://www.atioutdoors.com/product-category/rifles/ar-15/stocks-1-ar-15/), [New](https://www.atioutdoors.com/product-category/new-products/) $15.99 Rated **5.00** out of 5 Made in the USA [](#) [ Add to wishlist ](https://www.atioutdoors.com/wishlist-4/) [Add to cart](/wp-admin/admin-ajax.php?action=as_async_request_queue_runner&nonce=e91d30f382&add-to-cart=110336) [ Quick view ](https://www.atioutdoors.com/product/lop-quick-stop/) **— WHY CHOOSE ATI OUTDOORS —** ## **BUILT BY ATI. MADE FOR YOU.** We design and build every product with one goal in mind: to help you perform your best outdoors. - **Designed in-house. Built with purpose.** - **Rugged, reliable, and field tested.** - **Quality materials that go the distance.** - **Backed by our commitment to you.** [ Learn More About ATI ](/learn-about-ati/) ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/ATI_workbench-home-page.webp) ## ATI Intel ### [ SKS Rifle Instruction Manual | SKS0700 Shooting & Maintenance Guide ](https://www.atioutdoors.com/elementor-124374/) The SKS0700 SKS Rifle Instruction Manual provides safety, shooting, maintenance, disassembly, cleaning, and parts refere... [Continue reading](https://www.atioutdoors.com/elementor-124374/) ### [ Glock vs 1911: Which Is Better in 2026? Full Comparison Guide ](https://www.atioutdoors.com/glock-vs-1911-which-is-better-in-2026-full-comparison-guide/) Glock vs 1911: Which Handgun is Better? The Ultimate Debate In the firearms community, few questions spark as much pa... [Continue reading](https://www.atioutdoors.com/glock-vs-1911-which-is-better-in-2026-full-comparison-guide/) ### [ M1 Carbine Guide 2026: History, Variants, Manufacturers & CMP Buying Tips ](https://www.atioutdoors.com/m1-carbine-guide-2026-history-variants-manufacturers-cmp-buying-tips/) The Origins of a Legend: Why the M1 Carbine Was Built In 1940, the U.S. Army identified a critical need. Support troo... [Continue reading](https://www.atioutdoors.com/m1-carbine-guide-2026-history-variants-manufacturers-cmp-buying-tips/) ### [ M1 Garand Guide 2026: History, Specs, Buying & the Famous Ping ](https://www.atioutdoors.com/m1-garand-guide-2026-history-specs-buying-the-famous-ping/) The M1 Garand stands as one of the most iconic firearms in American military history. Often called "the greatest battle ... [Continue reading](https://www.atioutdoors.com/m1-garand-guide-2026-history-specs-buying-the-famous-ping/) ### [ Mosin-Nagant: History, Variants & Buying Guide (M91/30, M44, Finnish M39) ](https://www.atioutdoors.com/mosin-nagant-history-variants-buying-guide-m91-30-m44-finnish-m39/) The Mosin-Nagant: A Century of Bolt-Action Dominance For over 130 years, the Mosin-Nagant has occupied a unique space... [Continue reading](https://www.atioutdoors.com/mosin-nagant-history-variants-buying-guide-m91-30-m44-finnish-m39/) ### [ Taurus Judge Review: .45 Colt & .410 Revolver for Self-Defense & Outdoors + ATI X2 Grip Upgrade ](https://www.atioutdoors.com/taurus-judge-review-45-colt-410-revolver-for-self-defense-outdoors-ati-x2-grip-upgrade/) The Taurus Judge Handgun: The Ultimate Versatile Revolver for Self-Defense and Outdoor Adventures In the world of fir... [Continue reading](https://www.atioutdoors.com/taurus-judge-review-45-colt-410-revolver-for-self-defense-outdoors-ati-x2-grip-upgrade/) --- ### [Terms & Conditions](https://www.atioutdoors.com/term-conditions/) **Published:** December 15, 2017 **Author:** bDAaDnXN6j **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Terms-Condition.webp) .header { background: #111; border-bottom: 4px solid #c40000; padding: 54px 0 46px; margin-bottom: 0; } .header h1 { margin: 0; color: #fff; font-family: Cabin, Arial, Helvetica, sans-serif; font-size: 42px; font-weight: 700; line-height: 1.15; text-transform: uppercase; letter-spacing: 0.5px; } .header h1 span { color: inherit !important; font-family: Cabin, Arial, Helvetica, sans-serif !important; font-size: inherit !important; font-weight: inherit !important; } .policy { background: #f5f5f5; padding: 48px 0 64px; } .policy .content { max-width: 1040px; margin: 0 auto; background: #fff; border: 1px solid #e1e1e1; border-top: 5px solid #c40000; padding: 44px 48px; box-shadow: 0 8px 24px rgba(0, 0, 0, 0.06); color: #242424; font-family: Cabin, Arial, Helvetica, sans-serif; font-size: 15px; line-height: 1.75; } .policy .content > :first-child { margin-top: 0; } .policy h1, .policy h2, .policy h3 { font-family: Cabin, Arial, Helvetica, sans-serif; color: #111; line-height: 1.25; } .policy h1 { margin: 42px 0 16px; padding-bottom: 10px; border-bottom: 1px solid #ddd; font-size: 30px; font-weight: 700; text-transform: uppercase; letter-spacing: 0.25px; } .policy h2 { margin: 30px 0 12px; font-size: 23px; font-weight: 700; } .policy h3 { margin: 24px 0 10px; font-size: 19px; font-weight: 700; } .policy p { margin: 0 0 18px; } .policy ul { margin: 14px 0 24px; padding-left: 0; list-style: none; } .policy li { position: relative; margin-bottom: 10px; padding-left: 24px; } .policy li::before { content: ""; position: absolute; top: 0.78em; left: 0; width: 7px; height: 7px; background: #c40000; border-radius: 50%; } .policy strong { color: #111; font-weight: 700; } .policy a { color: #c40000; font-weight: 700; text-decoration: none; } .policy a:hover { color: #111; text-decoration: underline; } .policy .heading h1 { margin-top: 42px; } .policy .heading h1 span { font-size: inherit !important; } .policy .text-cms { background: #f7f7f7; border-left: 4px solid #c40000; padding: 18px 22px; margin: 12px 0 28px; } .policy h1\[style\], .policy p\[style\] { font-family: Cabin, Arial, Helvetica, sans-serif !important; color: #242424 !important; } @media (max-width: 767px) { .header { padding: 38px 0 32px; } .header h1 { font-size: 32px; } .policy { padding: 28px 0 44px; } .policy .content { padding: 30px 22px; font-size: 14px; } .policy h1 { font-size: 24px; } .policy h2 { font-size: 20px; } .policy h3 { font-size: 17px; } } Last updated: January 02, 2026 Please read these terms and conditions carefully before using Our Service. # Restricted to Adults (18+ Only) ATI Outdoors is designed for and restricted to individuals over 18 years old. Individuals under 18 years of age are prohibited from accessing ATI Outdoors. ATI Outdoors does not sell products for purchase by children. Items on this site require proof of age over 18 years old. By submitting an online order, you acknowledge that you are 18 years of age or older and that there are no local laws prohibiting the purchase of the item. # Interpretation and Definitions ## Interpretation The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural. ## Definitions For the purposes of these Terms and Conditions: - **Affiliate** means an entity that controls, is controlled by or is under common control with a party, where “control” means ownership of 50% or more of the shares, equity interest or other securities entitled to vote for election of directors or other managing authority. - **Account** means a unique account created for You to access our Service or parts of our Service. - **Company** (referred to as either “the Company”, “We”, “Us” or “Our” in this Agreement) refers to ATI Outdoors, 707 Beech Street, Grafton, WI. - **Country** refers to: Wisconsin, United States - **Feedback** means feedback, innovations or suggestions sent by You regarding the attributes, performance or features of our Service. - **Goods** refer to the items offered for sale on the Service. - **Orders** mean a request by You to purchase Goods from Us. - **Promotions** refer to contests, sweepstakes or other promotions offered through the Service. - **Service** refers to the Website. - **Terms and Conditions** (also referred as “Terms”) mean these Terms and Conditions that form the entire agreement between You and the Company regarding the use of the Service. - **Third-party Social Media Service** means any services or content (including data, information, products or services) provided by a third-party that may be displayed, included or made available by the Service. - **Website** refers to ATI Outdoors, accessible from https://www.atioutdoors.com/ - **You** means the individual accessing or using the Service, or the company, or other legal entity on behalf of which such individual is accessing or using the Service, as applicable. # Acknowledgement These are the Terms and Conditions governing the use of this Service and the agreement that operates between You and the Company. These Terms and Conditions set out the rights and obligations of all users regarding the use of the Service. Your access to and use of the Service is conditioned on Your acceptance of and compliance with these Terms and Conditions. These Terms and Conditions apply to all visitors, users and others who access or use the Service. By accessing or using the Service You agree to be bound by these Terms and Conditions. If You disagree with any part of these Terms and Conditions then You may not access the Service. Your access to and use of the Service is also conditioned on Your acceptance of and compliance with the Privacy Policy of the Company. Our Privacy Policy describes Our policies and procedures on the collection, use and disclosure of Your personal information when You use the Application or the Website and tells You about Your privacy rights and how the law protects You. Please read Our Privacy Policy carefully before using Our Service. # Accessibility For customers who need enhanced accessibility options, we’ve provided individualized options via the (wheelchair) tool on this page. Please select it if you need to adjust settings for your needs. # Placing Orders for Goods By placing an Order for Goods through the Service, You warrant that You legally capable (over 18 years old) of entering into binding contracts. ## Your Information If You wish to place an Order for Goods available on the Service, You may be asked to supply certain information relevant to Your Order including, without limitation, Your credit card number, the expiration date of Your credit card, Your billing address, and Your shipping information. You represent and warrant that: (i) You have the legal right to use any credit or debit card(s) or other payment method(s) in connection with any Order; and that (ii) the information You supply to us is true, correct and complete. By submitting such information, You grant us the right to provide the information to payment processing third parties for purposes of facilitating the completion of Your Order. ## Order Cancellation We reserve the right to refuse or cancel Your Order at any time for certain reasons including but not limited to: - Goods availability - Errors in the description or prices for Goods - Errors in Your Order We reserve the right to refuse or cancel Your Order if fraud or an unauthorized or illegal transaction is suspected. ### Your Order Cancellation Rights Any Goods you purchase can only be returned in accordance with these Terms and Conditions and Our [Return/Cancellation Policy.](https://www.atioutdoors.com/return-cancellation-policy/) Our Returns Policy forms a part of these Terms and Conditions. Please read our [Return/Cancellation Policy](https://www.atioutdoors.com/return-cancellation-policy/) to learn more about your right to cancel Your Order. Your right to cancel an Order only applies to Goods that are returned in the same condition as You received them. You should also include all of the products instructions, documents and wrappings. Goods that are damaged or not in the same condition as You received them or which are worn simply beyond opening the original packaging will not be refunded. You should therefore take reasonable care of the purchased Goods while they are in Your possession. We will reimburse You no later than 14 days from the day on which We receive Your order cancellation notice. We will use the same means of payment as You used for the Order, and You will not incur any fees for such reimbursement. You will not have any right to cancel an Order for the supply of any of the following Goods: - The supply of Goods made to Your specifications or clearly personalized. - The supply of Goods which according to their nature are not suitable to be returned, deteriorate rapidly or where the date of expiry is over. - The supply of Goods which are not suitable for return due to health protection or hygiene reasons and were unsealed after delivery. - The supply of Goods which are, after delivery, according to their nature, inseparably mixed with other items. - The supply of digital content which is not supplied on a tangible medium if the performance has begun with Your prior express consent and You have acknowledged Your loss of cancellation right. ## Availability, Errors and Inaccuracies We are constantly updating Our offerings of Goods on the Service. The Goods available on Our Service may be mispriced, described inaccurately, or unavailable, and We may experience delays in updating information regarding our Goods on the Service and in Our advertising on other websites. We cannot and do not guarantee the accuracy or completeness of any information, including prices, product images, specifications, availability, and services. We reserve the right to change or update information and to correct errors, inaccuracies, or omissions at any time without prior notice. ## Prices Policy The Company reserves the right to revise its prices at any time prior to accepting an Order. The prices quoted may be revised by the Company subsequent to accepting an Order in the event of any occurrence affecting delivery caused by government action, variation in customs duties, increased shipping charges, higher foreign exchange costs and any other matter beyond the control of the Company. In that event, You will have the right to cancel Your Order. ## Payments All Goods purchased are subject to a one-time payment. Payment can be made through various payment methods we have available, such as Visa, MasterCard, Affinity Card, American Express cards or online payment methods (PayPal, for example). Payment cards (credit cards or debit cards) are subject to validation checks and authorization by Your card issuer. If we do not receive the required authorization, We will not be liable for any delay or non-delivery of Your Order. # Promotions Any Promotions made available through the Service may be governed by rules that are separate from these Terms. If You participate in any Promotions, please review the applicable rules as well as our Privacy policy. If the rules for a Promotion conflict with these Terms, the Promotion rules will apply. # User Accounts When You create an account with Us, You must provide Us information that is accurate, complete, and current at all times. Failure to do so constitutes a breach of the Terms, which may result in immediate termination of Your account on Our Service. You are responsible for safeguarding the password that You use to access the Service and for any activities or actions under Your password, whether Your password is with Our Service or a Third-Party Social Media Service. You agree not to disclose Your password to any third party. You must notify Us immediately upon becoming aware of any breach of security or unauthorized use of Your account. You may not use as a username the name of another person or entity or that is not lawfully available for use, a name or trademark that is subject to any rights of another person or entity other than You without appropriate authorization, or a name that is otherwise offensive, vulgar or obscene. # Intellectual Property The Service and its original content (excluding Content provided by You or other users), features and functionality are and will remain the exclusive property of the Company and its licensors. The Service is protected by copyright, trademark, and other laws of both the Country and foreign countries. Our trademarks and trade dress may not be used in connection with any product or service without the prior written consent of the Company. # Your Feedback to Us ## Customer Reviews & Incent Programs ATI Outdoors values authentic customer feedback. Customers may be offered incentives, including discounts or coupons, for submitting a review of a purchased product. Incentives are provided in exchange for honest feedback only, and not in exchange for positive reviews. By submitting a review, you agree that: – Your review is accurate and based on your genuine experience – You disclose receipt of any incentive where required by applicable laws or platform policies – You will not submit false, misleading, or manipulated reviews ATI Outdoors reserves the right to moderate, remove, or decline to publish any review that violates these terms or for any reason at its sole discretion. By submitting a review, you grant ATI Outdoors a non-exclusive, royalty-free, perpetual license to use, reproduce, and display your review for marketing and business purposes. You assign all rights, title and interest in any Feedback You provide the Company. If for any reason such assignment is ineffective, You agree to grant the Company a non-exclusive, perpetual, irrevocable, royalty free, worldwide right and licence to use, reproduce, disclose, sub-licence, distribute, modify and exploit such Feedback without restriction. # Links to Other Websites Our Service may contain links to third-party web sites or services that are not owned or controlled by the Company. The Company has no control over, and assumes no responsibility for, the content, privacy policies, or practices of any third party web sites or services. You further acknowledge and agree that the Company shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with the use of or reliance on any such content, goods or services available on or through any such web sites or services. We strongly advise You to read the terms and conditions and privacy policies of any third-party web sites or services that You visit. # Termination We may terminate or suspend Your Account immediately, without prior notice or liability, for any reason whatsoever, including without limitation if You breach these Terms and Conditions. Upon termination, Your right to use the Service will cease immediately. If You wish to terminate Your Account, You may simply discontinue using the Service. # Limitation of Liability Notwithstanding any damages that You might incur, the entire liability of the Company and any of its suppliers under any provision of this Terms and Your exclusive remedy for all of the foregoing shall be limited to the amount actually paid by You through the Service or 100 USD if You haven’t purchased anything through the Service. To the maximum extent permitted by applicable law, in no event shall the Company or its suppliers be liable for any special, incidental, indirect, or consequential damages whatsoever (including, but not limited to, damages for loss of profits, loss of data or other information, for business interruption, for personal injury, loss of privacy arising out of or in any way related to the use of or inability to use the Service, third-party software and/or third-party hardware used with the Service, or otherwise in connection with any provision of this Terms), even if the Company or any supplier has been advised of the possibility of such damages and even if the remedy fails of its essential purpose. Some states do not allow the exclusion of implied warranties or limitation of liability for incidental or consequential damages, which means that some of the above limitations may not apply. In these states, each party’s liability will be limited to the greatest extent permitted by law. # “AS IS” and “AS AVAILABLE” Disclaimer The Service is provided to You “AS IS” and “AS AVAILABLE” and with all faults and defects without warranty of any kind. To the maximum extent permitted under applicable law, the Company, on its own behalf and on behalf of its Affiliates and its and their respective licensors and service providers, expressly disclaims all warranties, whether express, implied, statutory or otherwise, with respect to the Service, including all implied warranties of merchantability, fitness for a particular purpose, title and non-infringement, and warranties that may arise out of course of dealing, course of performance, usage or trade practice. Without limitation to the foregoing, the Company provides no warranty or undertaking, and makes no representation of any kind that the Service will meet Your requirements, achieve any intended results, be compatible or work with any other software, applications, systems or services, operate without interruption, meet any performance or reliability standards or be error free or that any errors or defects can or will be corrected. Without limiting the foregoing, neither the Company nor any of the company’s provider makes any representation or warranty of any kind, express or implied: (i) as to the operation or availability of the Service, or the information, content, and materials or products included thereon; (ii) that the Service will be uninterrupted or error-free; (iii) as to the accuracy, reliability, or currency of any information or content provided through the Service; or (iv) that the Service, its servers, the content, or e-mails sent from or on behalf of the Company are free of viruses, scripts, trojan horses, worms, malware, timebombs or other harmful components. Some jurisdictions do not allow the exclusion of certain types of warranties or limitations on applicable statutory rights of a consumer, so some or all of the above exclusions and limitations may not apply to You. But in such a case the exclusions and limitations set forth in this section shall be applied to the greatest extent enforceable under applicable law. # Governing Law The laws of the Country, excluding its conflicts of law rules, shall govern this Terms and Your use of the Service. Your use of the Application may also be subject to other local, state, national, or international laws. # Disputes Resolution If You have any concern or dispute about the Service, You agree to first try to resolve the dispute informally by contacting the Company. # For European Union (EU) Users If You are a European Union consumer, you will benefit from any mandatory provisions of the law of the country in which you are resident in. # United States Legal Compliance You represent and warrant that (i) You are not located in a country that is subject to the United States government embargo, or that has been designated by the United States government as a “terrorist supporting” country, and (ii) You are not listed on any United States government list of prohibited or restricted parties. # Severability and Waiver ## Severability If any provision of these Terms is held to be unenforceable or invalid, such provision will be changed and interpreted to accomplish the objectives of such provision to the greatest extent possible under applicable law and the remaining provisions will continue in full force and effect. ## Waiver Except as provided herein, the failure to exercise a right or to require performance of an obligation under this Terms shall not effect a party’s ability to exercise such right or require such performance at any time thereafter nor shall be the waiver of a breach constitute a waiver of any subsequent breach. # Translation Interpretation These Terms and Conditions may have been translated if We have made them available to You on our Service. You agree that the original English text shall prevail in the case of a dispute. # Changes to These Terms and Conditions We reserve the right, at Our sole discretion, to modify or replace these Terms at any time. If a revision is material We will make reasonable efforts to provide at least 30 days’ notice prior to any new terms taking effect. What constitutes a material change will be determined at Our sole discretion. By continuing to access or use Our Service after those revisions become effective, You agree to be bound by the revised terms. If You do not agree to the new terms, in whole or in part, please stop using the website and the Service. # ATI Outdoors ATI Outdoors manufactures and sells firearm accessories only. We do not sell firearms, ammunition, or any regulated or serialized components. It is the purchaser’s responsibility to ensure that installation, possession, and use of our products comply with all applicable federal, state, and local laws and regulations. **Check all applicable laws before installation.** # Contact Us If you have any questions about these Terms and Conditions, You can contact us: - By email: info@atioutdoors.com - By visiting this page on our website: https://atioutdoors.com/ - By phone number: [414-202-0985](tel:414-202-0985) --- ### [FAQ](https://www.atioutdoors.com/faq/) **Published:** June 3, 2026 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/FAQHeader.png) Customer Support # Frequently Asked Questions Find quick answers about contacting ATI Outdoors, returns, order tracking, cancellations, product fitment, and shipping. How do I contact ATI Outdoors? +You can contact ATI Outdoors by email at or by phone at [414-202-0985](tel:+14142020985). Our standard business hours are Monday through Friday, 9:00 AM to 4:00 PM CST. You can also use the contact form on our Contact Us page, and a member of our team will get back to you as soon as possible. [Contact Us](/contact/) How do I return an item? +ATI Outdoors accepts returns for items purchased directly from [www.atioutdoors.com](https://www.atioutdoors.com/). If you purchased your item from another store, dealer, or online retailer, please return it to the original place of purchase. Returns are accepted within 30 days of purchase for 100% of the product's purchase price, as long as the item has not been damaged, modified, or returned with missing parts. Before sending anything back, please contact ATI Outdoors so we can issue an RMA number. Items must be returned in original, new condition and packaging. Refunds are issued within 15 business days after ATI receives the returned item. [Start a Return](/request-for-return-jrc/) How do I track my order? +You can track your order using the Order Tracking page on atioutdoors.com. Enter your Order ID and billing email address, then click Track. Your Order ID can be found on your receipt and in the order confirmation email you received after placing your order. [Track Your Order](/order-tracking/) How do I cancel my order? +ATI Outdoors works hard to process and ship orders as quickly as possible. Because orders are processed quickly, they cannot be interrupted once they have been placed. If you need to cancel an order, please wait until the order has been delivered and then begin a return according to our Return Policy. If you forgot to add an item to your order, please place a separate order. The additional item will ship separately and will have its own order number and tracking link. Does this fit my gun? +Many ATI Outdoors products are designed to fit specific firearm models, gauges, or platforms. Please review the product title, product description, fitment details, and any listed compatibility information before ordering. If you are unsure whether a product will fit your firearm, contact us before placing your order. Please include your firearm's make, model, gauge or caliber, and any other relevant details so our team can help confirm compatibility. ATI Outdoors manufactures and sells firearm accessories only. We do not sell firearms, ammunition, or regulated or serialized components. [Ask About Fitment](/contact/) How fast is your shipping? +ATI Outdoors ships to the contiguous United States, Alaska, and Hawaii. Alaska and Hawaii may have increased shipping rates due to higher shipping costs. Orders ship within 24-48 hours or less, with most orders shipping the next business day Monday through Friday. Some products may require up to 24 hours of lead time to prepare for shipment. ATI Outdoors does not ship individual website orders internationally. [View Shipping Policy](/shipping/) --- ### [Learn About ATI](https://www.atioutdoors.com/learn-about-ati/) **Published:** June 3, 2026 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/About-ATI-Page-Header.webp) # Learn More About ATI Outdoors ## Built by ATI. Made for You. At ATI Outdoors, every product starts with one goal in mind: to help you perform your best outdoors. We design and build dependable firearm accessories for hunters, sport shooters, outdoor enthusiasts, and firearm owners who expect their gear to work as hard as they do. - Designed in-house. Built with purpose. - Rugged, reliable, and field tested. - Quality materials that go the distance. - Backed by our commitment to you. ## Designed In-House. Built With Purpose. ATI Outdoors is built around practical design, real-world use, and a deep understanding of what firearm owners need from their equipment. Every product is developed with function first. From fit and feel to strength and adjustability, each detail is chosen to improve comfort, control, and confidence. ## Rugged, Reliable, and Field Tested. Outdoor gear needs to be ready for real conditions. That is why ATI products are made to handle repeated use in the field, at the range, and anywhere your firearm goes. We focus on durable construction, dependable fitment, and smart design so you can count on your setup when it matters. ## Quality Materials That Go the Distance. ATI Outdoors uses proven materials and manufacturing methods to create accessories that are strong, lightweight, and built for long-term use. From reinforced polymer components to precision-fit upgrade systems, our products are made to deliver lasting value without unnecessary complexity. ## Innovation for Every Shooter. Every shooter has different needs. ATI Outdoors creates products that help you customize your firearm, improve comfort, add functionality, and build a setup that works for the way you shoot. Whether you are upgrading a trusted hunting firearm, improving your range setup, or adding practical accessories, ATI gives you dependable options built with purpose. ## Our Mission To design and build dependable firearm accessories that improve performance, comfort, and customization for hunters, shooters, and outdoor enthusiasts. ## Why Choose ATI Outdoors? - **Designed with purpose.** Every product is created to solve a real need and improve the user experience. - **Built for the outdoors.** ATI products are made for the conditions hunters, shooters, and outdoor enthusiasts face. - **Made for customization.** We help customers upgrade and personalize their firearms with practical, reliable components. - **Focused on value.** ATI delivers rugged firearm accessories without overcomplicating the experience. - **Committed to our customers.** We stand behind our products and the people who use them. ## Built for the Way You Shoot. Whether you are preparing for hunting season, upgrading your range setup, or improving the feel and function of your firearm, ATI Outdoors is here to help you build with confidence. --- ### [Privacy Policy](https://www.atioutdoors.com/new-privacy/) **Published:** February 6, 2019 **Author:** bDAaDnXN6j **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Privacy-Policy-Header.png) Last updated: January 07, 2026 This Privacy Policy describes Our policies and procedures on the collection, use and disclosure of Your information when You use the Service and tells You about Your privacy rights and how the law protects You. We use Your Personal data to provide and improve the Service. By using the Service, You agree to the collection and use of information in accordance with this Privacy Policy. # Interpretation and Definitions ## Interpretation The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural. ## Definitions For the purposes of this Privacy Policy: - **You** means the individual accessing or using the Service, or the company, or other legal entity on behalf of which such individual is accessing or using the Service, as applicable.Under GDPR (General Data Protection Regulation), You can be referred to as the Data Subject or as the User as you are the individual using the Service. - **Company** (referred to as either “the Company”, “We”, “Us” or “Our” in this Agreement) refers to ATI Outdoors, Grafton WI, 53024.For the purpose of the GDPR, the Company is the Data Controller. - **Affiliate** means an entity that controls, is controlled by or is under common control with a party, where “control” means ownership of 50% or more of the shares, equity interest or other securities entitled to vote for election of directors or other managing authority. - **Account** means a unique account created for You to access our Service or parts of our Service. - **Website** refers to ATI Outdoors, accessible from https://atioutdoors.com/ - **Service** refers to the Website. - **Country** refers to: Wisconsin, United States - **Service Provider** means any natural or legal person who processes the data on behalf of the Company. It refers to third-party companies or individuals employed by the Company to facilitate the Service, to provide the Service on behalf of the Company, to perform services related to the Service or to assist the Company in analyzing how the Service is used.For the purpose of the GDPR, Service Providers are considered Data Processors. - **Third-party Social Media Service** refers to any website or any social network website through which a User can log in or create an account to use the Service. - **Facebook Fan Page** is a public profile named ATI Outdoors specifically created by the Company on the Facebook social network, accessible from https://www.facebook.com/ATIoutdoors/ - **Personal Data** is any information that relates to an identified or identifiable individual.For the purposes for GDPR, Personal Data means any information relating to You such as a name, an identification number, location data, online identifier or to one or more factors specific to the physical, physiological, genetic, mental, economic, cultural or social identity.For the purposes of the CCPA, Personal Data means any information that identifies, relates to, describes or is capable of being associated with, or could reasonably be linked, directly or indirectly, with You. - **Cookies** are small files that are placed on Your computer, mobile device or any other device by a website, containing the details of Your browsing history on that website among its many uses. - **Usage Data** refers to data collected automatically, either generated by the use of the Service or from the Service infrastructure itself (for example, the duration of a page visit). - **Data Controller**, for the purposes of the GDPR (General Data Protection Regulation), refers to the Company as the legal person which alone or jointly with others determines the purposes and means of the processing of Personal Data. - **Do Not Track** (DNT) is a concept that has been promoted by US regulatory authorities, in particular the U.S. Federal Trade Commission (FTC), for the Internet industry to develop and implement a mechanism for allowing internet users to control the tracking of their online activities across websites. - **Business**, for the purpose of the CCPA (California Consumer Privacy Act), refers to the Company as the legal entity that collects Consumers’ personal information and determines the purposes and means of the processing of Consumers’ personal information, or on behalf of which such information is collected and that alone, or jointly with others, determines the purposes and means of the processing of consumers’ personal information, that does business in the State of California. - **Consumer**, for the purpose of the CCPA (California Consumer Privacy Act), means a natural person who is a California resident. A resident, as defined in the law, includes (1) every individual who is in the USA for other than a temporary or transitory purpose, and (2) every individual who is domiciled in the USA who is outside the USA for a temporary or transitory purpose. - **Sale**, for the purpose of the CCPA (California Consumer Privacy Act), means selling, renting, releasing, disclosing, disseminating, making available, transferring, or otherwise communicating orally, in writing, or by electronic or other means, a Consumer’s Personal information to another business or a third party for monetary or other valuable consideration. # Collecting and Using Your Personal Data ## Types of Data Collected ### Personal Data While using Our Service, We may ask You to provide Us with certain personally identifiable information that can be used to contact or identify You. Personally identifiable information may include, but is not limited to: - Email address - First name and last name - Phone number - Address, State, Province, ZIP/Postal code, City - Usage Data ### Usage Data Usage Data is collected automatically when using the Service. Usage Data may include information such as Your Device’s Internet Protocol address (e.g. IP address), browser type, browser version, the pages of our Service that You visit, the time and date of Your visit, the time spent on those pages, unique device identifiers and other diagnostic data. When You access the Service by or through a mobile device, We may collect certain information automatically, including, but not limited to, the type of mobile device You use, Your mobile device unique ID, the IP address of Your mobile device, Your mobile operating system, the type of mobile Internet browser You use, unique device identifiers and other diagnostic data. We may also collect information that Your browser sends whenever You visit our Service or when You access the Service by or through a mobile device. ### Tracking Technologies and Cookies We use Cookies and similar tracking technologies to track the activity on Our Service and store certain information. Tracking technologies used are beacons, tags, and scripts to collect and track information and to improve and analyze Our Service. You can instruct Your browser to refuse all Cookies or to indicate when a Cookie is being sent. However, if You do not accept Cookies, You may not be able to use some parts of our Service. Cookies can be “Persistent” or “Session” Cookies. Persistent Cookies remain on your personal computer or mobile device when You go offline, while Session Cookies are deleted as soon as You close your web browser. We use both session and persistent Cookies for the purposes set out below: - **Necessary / Essential Cookies**Type: Session CookiesAdministered by: UsPurpose: These Cookies are essential to provide You with services available through the Website and to enable You to use some of its features. They help to authenticate users and prevent fraudulent use of user accounts. Without these Cookies, the services that You have asked for cannot be provided, and We only use these Cookies to provide You with those services. - **Cookies Policy / Notice Acceptance Cookies**Type: Persistent CookiesAdministered by: UsPurpose: These Cookies identify if users have accepted the use of cookies on the Website. - **Functionality Cookies**Type: Persistent CookiesAdministered by: UsPurpose: These Cookies allow us to remember choices You make when You use the Website, such as remembering your login details or language preference. The purpose of these Cookies is to provide You with a more personal experience and to avoid You having to re-enter your preferences every time You use the Website. - **Tracking and Performance Cookies**Type: Persistent CookiesAdministered by: Third-PartiesPurpose: These Cookies are used to track information about traffic to the Website and how users use the Website. The information gathered via these Cookies may directly or indirectly identify you as an individual visitor. This is because the information collected is typically linked to a pseudonymous identifier associated with the device you use to access the Website. We may also use these Cookies to test new advertisements, pages, features or new functionality of the Website to see how our users react to them. For more information about the cookies we use and your choices regarding cookies, please visit our Cookies Policy. ## Use of Your Personal Data The Company may use Personal Data for the following purposes: - **To provide and maintain our Service**, including to monitor the usage of our Service. - **To manage Your Account:** to manage Your registration as a user of the Service. The Personal Data You provide can give You access to different functionalities of the Service that are available to You as a registered user. - **For the performance of a contract:** the development, compliance and undertaking of the purchase contract for the products, items or services You have purchased or of any other contract with Us through the Service. - **To contact You:** To contact You by email, telephone calls, SMS, or other equivalent forms of electronic communication, such as a mobile application’s push notifications regarding updates or informative communications related to the functionalities, products or contracted services, including the security updates, when necessary or reasonable for their implementation. - **To provide You** with news, special offers and general information about other goods, services and events which we offer that are similar to those that you have already purchased or enquired about unless You have opted not to receive such information. - **To manage Your requests:** To attend and manage Your requests to Us. We may share your personal information in the following situations: - **With Service Providers:** We may share Your personal information with Service Providers to monitor and analyze the use of our Service, to show advertisements to You to help support and maintain Our Service, to contact You, to advertise on third party websites to You after You visited our Service or for payment processing. - **For Business transfers:** We may share or transfer Your personal information in connection with, or during negotiations of, any merger, sale of Company assets, financing, or acquisition of all or a portion of our business to another company. - **With Affiliates:** We may share Your information with Our affiliates, in which case we will require those affiliates to honor this Privacy Policy. Affiliates include Our parent company and any other subsidiaries, joint venture partners or other companies that We control or that are under common control with Us. - **With Business partners:** We may share Your information with Our business partners to offer You certain products, services or promotions. - **With other users:** when You share personal information or otherwise interact in the public areas with other users, such information may be viewed by all users and may be publicly distributed outside. If You interact with other users or register through a Third-Party Social Media Service, Your contacts on the Third-Party Social Media Service may see You name, profile, pictures and description of Your activity. Similarly, other users will be able to view descriptions of Your activity, communicate with You and view Your profile. ## Retention of Your Personal Data The Company will retain Your Personal Data only for as long as is necessary for the purposes set out in this Privacy Policy. We will retain and use Your Personal Data to the extent necessary to comply with our legal obligations (for example, if we are required to retain your data to comply with applicable laws), resolve disputes, and enforce our legal agreements and policies. The Company will also retain Usage Data for internal analysis purposes. Usage Data is generally retained for a shorter period of time, except when this data is used to strengthen the security or to improve the functionality of Our Service, or We are legally obligated to retain this data for longer time periods. ## Transfer of Your Personal Data Your information, including Personal Data, is processed at the Company’s operating offices and in any other places where the parties involved in the processing are located. It means that this information may be transferred to — and maintained on — computers located outside of Your state, province, country or other governmental jurisdiction where the data protection laws may differ than those from Your jurisdiction. Your consent to this Privacy Policy followed by Your submission of such information represents Your agreement to that transfer. The Company will take all steps reasonably necessary to ensure that Your data is treated securely and in accordance with this Privacy Policy and no transfer of Your Personal Data will take place to an organization or a country unless there are adequate controls in place including the security of Your data and other personal information. ## Disclosure of Your Personal Data ### Business Transactions If the Company is involved in a merger, acquisition or asset sale, Your Personal Data may be transferred. We will provide notice before Your Personal Data is transferred and becomes subject to a different Privacy Policy. ### Law enforcement Under certain circumstances, the Company may be required to disclose Your Personal Data if required to do so by law or in response to valid requests by public authorities (e.g. a court or a government agency). ### Other legal requirements The Company may disclose Your Personal Data in the good faith belief that such action is necessary to: - Comply with a legal obligation - Protect and defend the rights or property of the Company - Prevent or investigate possible wrongdoing in connection with the Service - Protect the personal safety of Users of the Service or the public - Protect against legal liability ## Security of Your Personal Data The security of Your Personal Data is important to Us, but remember that no method of transmission over the Internet, or method of electronic storage is 100% secure. While We strive to use commercially acceptable means to protect Your Personal Data, We cannot guarantee its absolute security. # Detailed Information on the Processing of Your Personal Data Service Providers have access to Your Personal Data only to perform their tasks on Our behalf and are obligated not to disclose or use it for any other purpose. ## Analytics We may use third-party Service providers to monitor and analyze the use of our Service. - **Google Analytics**Google Analytics is a web analytics service offered by Google that tracks and reports website traffic. Google uses the data collected to track and monitor the use of our Service. This data is shared with other Google services. Google may use the collected data to contextualise and personalise the ads of its own advertising network.You can opt-out of having made your activity on the Service available to Google Analytics by installing the Google Analytics opt-out browser add-on. The add-on prevents the Google Analytics JavaScript (ga.js, analytics.js and dc.js) from sharing information with Google Analytics about visits activity.For more information on the privacy practices of Google, please visit the Google Privacy & Terms web page: ## Email Marketing We may use Your Personal Data to contact You with newsletters, marketing or promotional materials and other information that may be of interest to You. You may opt-out of receiving any, or all, of these communications from Us by following the unsubscribe link or instructions provided in any email We send or by contacting Us. We may use Email Marketing Service Providers to manage and send emails to You. - **Omnisen:** Omnisend is an email marketing sending service provided by Omnisend, Inc. For more information on the privacy practices of Omnisend please visit their Privacy policy: ## Payments We may provide paid products and/or services within the Service. In that case, we may use third-party services for payment processing (e.g. payment processors). We will not store or collect Your payment card details. That information is provided directly to Our third-party payment processors whose use of Your personal information is governed by their Privacy Policy. These payment processors adhere to the standards set by PCI-DSS as managed by the PCI Security Standards Council, which is a joint effort of brands like Visa, Mastercard, American Express and Discover. PCI-DSS requirements help ensure the secure handling of payment information. - **Authorized.net/VISA** Their Privacy Policy can be viewed at ## Usage, Performance and Miscellaneous We may use third-party Service Providers to provide better improvement of our Service. - **Invisible CAPTCHA.** We use an invisible captcha service named CAPTCHA. CAPTCHA is operated by Cloudflare. The CAPTCHA service may collect information from You and from Your Device for security purposes.The information gathered by CAPTCHA is held in accordance with the Privacy Policy of Google: # GDPR Privacy ## Legal Basis for Processing Personal Data under GDPR We may process Personal Data under the following conditions: - **Consent:** You have given Your consent for processing Personal Data for one or more specific purposes. - **Performance of a contract:** Provision of Personal Data is necessary for the performance of an agreement with You and/or for any pre-contractual obligations thereof. - **Legal obligations:** Processing Personal Data is necessary for compliance with a legal obligation to which the Company is subject. - **Vital interests:** Processing Personal Data is necessary in order to protect Your vital interests or of another natural person. - **Public interests:** Processing Personal Data is related to a task that is carried out in the public interest or in the exercise of official authority vested in the Company. - **Legitimate interests:** Processing Personal Data is necessary for the purposes of the legitimate interests pursued by the Company. In any case, the Company will gladly help to clarify the specific legal basis that applies to the processing, and in particular whether the provision of Personal Data is a statutory or contractual requirement, or a requirement necessary to enter into a contract. ## Your Rights under the GDPR The Company undertakes to respect the confidentiality of Your Personal Data and to guarantee You can exercise Your rights. You have the right under this Privacy Policy, and by law if You are within the EU, to: - **Request access to Your Personal Data.** The right to access, update or delete the information We have on You. Whenever made possible, you can access, update or request deletion of Your Personal Data directly within Your account settings section. If you are unable to perform these actions yourself, please contact Us to assist You. This also enables You to receive a copy of the Personal Data We hold about You. - **Request correction of the Personal Data that We hold about You.** You have the right to to have any incomplete or inaccurate information We hold about You corrected. - **Object to processing of Your Personal Data.** This right exists where We are relying on a legitimate interest as the legal basis for Our processing and there is something about Your particular situation, which makes You want to object to our processing of Your Personal Data on this ground. You also have the right to object where We are processing Your Personal Data for direct marketing purposes. - **Request erasure of Your Personal Data.** You have the right to ask Us to delete or remove Personal Data when there is no good reason for Us to continue processing it. - **Request the transfer of Your Personal Data.** We will provide to You, or to a third-party You have chosen, Your Personal Data in a structured, commonly used, machine-readable format. Please note that this right only applies to automated information which You initially provided consent for Us to use or where We used the information to perform a contract with You. - **Withdraw Your consent.** You have the right to withdraw Your consent on using your Personal Data. If You withdraw Your consent, We may not be able to provide You with access to certain specific functionalities of the Service. ## Exercising of Your GDPR Data Protection Rights You may exercise Your rights of access, rectification, cancellation and opposition by contacting Us. Please note that we may ask You to verify Your identity before responding to such requests. If You make a request, We will try our best to respond to You as soon as possible. You have the right to complain to a Data Protection Authority about Our collection and use of Your Personal Data. For more information, if You are in the European Economic Area (EEA), please contact Your local data protection authority in the EEA. # Facebook Fan Page ## Data Controller for the Facebook Fan Page The Company is the Data Controller of Your Personal Data collected while using the Service. As operator of the Facebook Fan Page (https://www.facebook.com/ATIoutdoors/, the Company and the operator of the social network Facebook are Joint Controllers. The Company has entered into agreements with Facebook that define the terms for use of the Facebook Fan Page, among other things. These terms are mostly based on the Facebook Terms of Service: Visit the Facebook Privacy Policy for more information about how Facebook manages Personal data or contact Facebook online, or by mail: Facebook, Inc. ATTN, Privacy Operations, 1601 Willow Road, Menlo Park, CA 94025, United States. ## Facebook Insights We use the Facebook Insights function in connection with the operation of the Facebook Fan Page and on the basis of the GDPR, in order to obtain anonymized statistical data about Our users. For this purpose, Facebook places a Cookie on the device of the user visiting Our Facebook Fan Page. Each Cookie contains a unique identifier code and remains active for a period of two years, except when it is deleted before the end of this period. Facebook receives, records and processes the information stored in the Cookie, especially when the user visits the Facebook services, services that are provided by other members of the Facebook Fan Page and services by other companies that use Facebook services. For more information on the privacy practices of Facebook, please visit Facebook Privacy Policy here: # CCPA Privacy ## Your Rights under the CCPA Under this Privacy Policy, and by law if You are a resident of California, You have the following rights: - **The right to notice.** You must be properly notified which categories of Personal Data are being collected and the purposes for which the Personal Data is being used. - **The right to access / the right to request.** The CCPA permits You to request and obtain from the Company information regarding the disclosure of Your Personal Data that has been collected in the past 12 months by the Company or its subsidiaries to a third-party for the third party’s direct marketing purposes. - **The right to say no to the sale of Personal Data.** You also have the right to ask the Company not to sell Your Personal Data to third parties. You can submit such a request by visiting our “Do Not Sell My Personal Information” section or web page. - **The right to know about Your Personal Data.** You have the right to request and obtain from the Company information regarding the disclosure of the following: - The categories of Personal Data collected - The sources from which the Personal Data was collected - The business or commercial purpose for collecting or selling the Personal Data - Categories of third parties with whom We share Personal Data - The specific pieces of Personal Data we collected about You - **The right to delete Personal Data.** You also have the right to request the deletion of Your Personal Data that have been collected in the past 12 months. - **The right not to be discriminated against.** You have the right not to be discriminated against for exercising any of Your Consumer’s rights, including by: - Denying goods or services to You - Charging different prices or rates for goods or services, including the use of discounts or other benefits or imposing penalties - Providing a different level or quality of goods or services to You - Suggesting that You will receive a different price or rate for goods or services or a different level or quality of goods or services. ## Exercising Your CCPA Data Protection Rights In order to exercise any of Your rights under the CCPA, and if you are a California resident, You can email or call us or visit our “Do Not Sell My Personal Information” section or web page. The Company will disclose and deliver the required information free of charge within 45 days of receiving Your verifiable request. The time period to provide the required information may be extended once by an additional 45 days when reasonable necessary and with prior notice. ## Do Not Sell My Personal Information We do not sell personal information. However, the Service Providers we partner with (for example, our advertising partners) may use technology on the Service that “sells” personal information as defined by the CCPA law. If you wish to opt out of the use of your personal information for interest-based advertising purposes and these potential sales as defined under CCPA law, you may do so by following the instructions below. Please note that any opt out is specific to the browser You use. You may need to opt out on every browser that you use. ### Website You can opt out of receiving ads that are personalized as served by our Service Providers by following our instructions presented on the Service: - From Our “Cookie Consent” notice banner - Or from Our “CCPA Opt-out” notice banner - Or from Our “Do Not Sell My Personal Information” notice banner - Or from Our “Do Not Sell My Personal Information” link The opt out will place a cookie on Your computer that is unique to the browser You use to opt out. If you change browsers or delete the cookies saved by your browser, you will need to opt out again. ### Mobile Devices Your mobile device may give you the ability to opt out of the use of information about the apps you use in order to serve you ads that are targeted to your interests: - “Opt out of Interest-Based Ads” or “Opt out of Ads Personalization” on Android devices - “Limit Ad Tracking” on iOS devices You can also stop the collection of location information from Your mobile device by changing the preferences on your mobile device. # “Do Not Track” Policy as Required by California Online Privacy Protection Act (CalOPPA) Our Service does not respond to Do Not Track signals. However, some third party websites do keep track of You browsing activities. If You are visiting such websites, You can set Your preferences in Your web browser to inform websites that You do not want to be tracked. You can enable or disable DNT by visiting the preferences or settings page of Your web browser. # Children’s Privacy Our Service does not address anyone under the age of 18. We do not knowingly collect personally identifiable information from anyone under the age of 18. If You are a parent or guardian and You are aware that Your child has provided Us with Personal Data, please contact Us. If We become aware that We have collected Personal Data from anyone under the age of 13 without verification of parental consent, We take steps to remove that information from Our servers. We also may limit how We collect, use, and store some of the information of Users between 13 and 18 years old. In some cases, this means We will be unable to provide certain functionality of the Service to these users. If We need to rely on consent as a legal basis for processing Your information and Your country requires consent from a parent, We may require Your parent’s consent before We collect and use that information. # Links to Other Websites Our Service may contain links to other websites that are not operated by Us. If You click on a third party link, You will be directed to that third party’s site. We strongly advise You to review the Privacy Policy of every site You visit. We have no control over and assume no responsibility for the content, privacy policies or practices of any third party sites or services. # Changes to this Privacy Policy We may update our Privacy Policy from time to time. We will notify You of any changes by posting the new Privacy Policy on this page. We will let You know via email and/or a prominent notice on Our Service, prior to the change becoming effective and update the “Last updated” date at the top of this Privacy Policy. You are advised to review this Privacy Policy periodically for any changes. Changes to this Privacy Policy are effective when they are posted on this page. # Contact Us If you have any questions about this Privacy Policy, You can contact us: - By email: - By phone number: [414-202-0985](tel:+14142020985) --- ### [Dealer/Distributor Information](https://www.atioutdoors.com/dealer-distributor-information/) **Published:** June 3, 2026 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Dealer_Dist-Info-Header.png) # Dealer & Distributor Information To apply for a dealer account, email us at . All other dealer and distributor order status or information can also be obtained by emailing us at . Our business-to-business sales staff can also be reached at [414-202-0985](tel:+14142020985). Please note this line is for **dealers and distributors only**. All other inquiries should be sent to . Please see our international information section below for distribution inquiries outside of the United States. --- ### [Return/Cancellation Policy](https://www.atioutdoors.com/return-cancellation-policy/) **Published:** June 3, 2026 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Return_Cancel-Header.png) # Return / Cancellation Policy ## Returns Your satisfaction is important to ATI Outdoors. If you need to return a product, we will make every reasonable effort to satisfy your request. - ATI only accepts returns for items purchased on our website: [www.atioutdoors.com](https://www.atioutdoors.com/). If you purchased your item from a different store or online retailer, your item must be returned to where you originally purchased it. - ATI will accept returns for 100% of the product's purchase price within ***30 days of purchase.*** - **Returns must not have been damaged, modified, or have missing parts.** - If ATI is responsible for the return, we will pay all shipping charges. Otherwise, the customer is responsible for return shipping. See ATI's warranty policy below. - Customers must contact ATI before sending items back for return. ATI will then issue the customer an RMA number to return the item or items in original, new condition and packaging. - All refunds will be issued to the customer within 15 business days of receiving the return. - Returns purchased with an online promotion will be credited as an online credit for future purchases. - **Returns received damaged, modified, or with missing parts will not be eligible for a refund.** - ATI's Return & Warranty Policy is valid only for the original purchaser and is void when the product is purchased secondhand. - To start your return, use the online [**Return Request**](https://www.atioutdoors.com/request-for-return-jrc/), email us at ****, or call us at **[414-202-0985](tel:+14142020985)**. - Standard business hours: Monday-Friday, 9:00 AM-4:00 PM CST. ## Cancellations We work hard to process your order quickly so that you receive it as soon as possible. Because we process orders as fast as possible, they cannot be interrupted once they have been placed. If you forgot to add something to your order before it was placed, please place a separate order for the additional item. It will ship to you in separate packaging and will have its own unique order number and tracking link. If you would like to cancel your order, you will need to wait until you have received the order and then return it for a refund according to the **Return Policy** above. --- ### [Shipping](https://www.atioutdoors.com/shipping/) **Published:** December 15, 2017 **Author:** bDAaDnXN6j **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Shipping-Header.png) # Ordering & Shipping ### Orders Items left in shopping carts will be cleared in 48 hours. All information provided during the ordering process is secure and private. We do not sell information. All discount codes provided by ATI are only valid on purchases placed via the websites at full MSRP. Discount codes may not be valid on sale items. Backordered items will be shipped out as soon as possible. To check on item availability please email our customer service department at . ATI Outdoors does not sell products for purchase by children under 18. Items on this site require proof of age over 18 years old. By submitting an online order you acknowledge that you are 18 years of age or older and that there are no local laws prohibiting the purchase of the item. ### Shipping We ship using UPS, FEDEX and USPS Priority Mail, depending on the items being purchased. ATI Outdoors ships to the Contiguous United States as well as Alaska & Hawaii at an increased rate due to higher shipping costs. All orders will ship within 24-48 hours or less, most shipping the next business day (Mon-Fri). Customers will not be able to receive refund on any shipping charges, expedited or otherwise, due to “weather delays”. We are not able to get refunds from UPS in these instances, so we cannot refund our customers. **Due to [California Bill AB1263](https://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=202520260AB1263), we are unable to sell/ship to the state of California as of 01/01/26**. If this bill is overturned, we will gladly resume shipments. We apologize for the inconvenience and appreciate your understanding. ATI does not ship online orders internationally due to the special rules/licensing required for firearm accessory shipments (Canada included). ATI cannot ship to overseas military bases, as these shipments still must pass through customs which firearm parts cannot do without special licensing. --- ### [Limited Lifetime Warranty](https://www.atioutdoors.com/limited-lifetime-warranty/) **Published:** June 3, 2026 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Lifetime-Warranty-Header.png) # Warranty Policy ATI's Limited Lifetime Warranty covers the product throughout the lifetime of the original purchaser, except in cases of intentional abuse, neglect, alterations, or modifications unless specified in our instructions or authorized by ATI. - The Limited Lifetime Warranty covers all manufacturers' defects. This warranty covers any failure or defect in the product that is the direct responsibility of the manufacturer. - This Limited Lifetime Warranty does not apply to normal wear of the anodized finish on our aluminum components. It also does not apply to normal wear and tear of polymers or cheekrest pads, including scuffs, scratches, gouges, and similar cosmetic damage. - ATI does not assume responsibility for improper installation of our products. This includes broken or stripped fasteners when a fastener has been over-torqued or the wrong tool was used. - ATI is not responsible for rust or oxidation of metal components caused by exposure to the elements or submersion, unless the components are from our Marine line. - ATI is not responsible for missing or damaged items purchased secondhand, including items purchased through websites such as eBay. --- ### [Compare](https://www.atioutdoors.com/compare/) **Published:** August 26, 2021 **Author:** John Chvala **Content:** --- ### [Wishlist](https://www.atioutdoors.com/wishlist-4/) **Published:** August 26, 2021 **Author:** John Chvala **Content:** ### My account - [ Dashboard ](https://www.atioutdoors.com/my-account/) - [ Orders ](https://www.atioutdoors.com/my-account/orders/) - [ Downloads ](https://www.atioutdoors.com/my-account/downloads/) - [ Addresses ](https://www.atioutdoors.com/my-account/edit-address/) - [ Account details ](https://www.atioutdoors.com/my-account/edit-account/) - [ 2FA Configuration ](https://www.atioutdoors.com/my-account/wp-2fa/) - [ Wishlist ](https://www.atioutdoors.com/wishlist-4/) - [ Logout ](https://www.atioutdoors.com/my-account/customer-logout/?_wpnonce=59f1d7479e) ## This wishlist is empty. You don't have any products in the wishlist yet. You will find a lot of interesting products on our "Shop" page. [ Return to shop ](https://www.atioutdoors.com/shop/) --- ### [Contact Us](https://www.atioutdoors.com/contact/) **Published:** November 28, 2017 **Author:** bDAaDnXN6j **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Contact-ATI-Header.png) ## Contact ATI! Your Name (required) Your Email (required) Subject Your Message --- ### [About Us](https://www.atioutdoors.com/about-us/) **Published:** November 28, 2017 **Author:** bDAaDnXN6j **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/About-Us-Header.png) **ATI Outdoors** is the premier manufacturer of leading-edge rifle stocks, shotgun stocks, and accessories for a wide variety of firearms. Our products are manufactured in the USA. Well-known to both collectors, hunting enthusiasts and members of the Military and Law Enforcement communities; **ATI Outdoors** has a long and proud tradition of total commitment to top quality, excellent customer-care and affordable prices. All of us at **ATI Outdoors** are dedicated to being the leader in high-quality, easily-installation, affordable rifle and shotgun stocks. We welcome your comments and are always glad to help in any way that we can. Please feel free to contact us with any questions. We look forward to being of service to you! *Our philosophy is quite simple…* …combine the latest cutting-edge technology with innovative design and premium materials to achieve the highest quality gunstocks and accessories in the industry. With this goal, ATI Outdoor is the premier manufacturer of leading-edge gunstocks as well as synthetic and aluminum accessories for a wide variety of firearms. Never fully satisfied with present-day technology, we are constantly pushing today’s science in an effort to apply the latest advancements to our products. All this, to provide you with the highest quality gunstocks and accessories available…period. Increasing both the value and quality of your firearm, we simplified your life with our ETC: Easy To Customize advantage. All of our new products, including our Advanced Aluminum Rail Systems and Buffer Tube packages, are completely compatible with existing ATI products; thus, enhancing your current ATI gunstock. ETC allows you to modify, instead of replace, your existing gunstock. Since ATI builds![Buffer Tube](https://www.atioutdoors.com/wp-content/uploads/2019/03/ABUimage.jpg) gunstocks that will not become obsolete, you have the option to upgrade in phases at your own rate or as your budget allows. The end result? The highest quality, easy to customize gunstock you’ll ever own. While ATI’s products are well-known to collectors and hunting enthusiasts, we are also a recognized leader in synthetic and aluminum accessories and gunstocks by the armed services and law enforcement worldwide. Our products are easy to install, upgrade and customize, manufactured in the U.S.A., and constructed with premium Extreme Military Grade Polymer. Our aluminum products are made with Military Type III Anodized, 6061 T6 Aluminum, and all ATI products have a lifetime warranty; resulting in the highest quality gunstocks and accessories in the industry. ATI Outdoors manufactures and sells firearm accessories only. We do not sell firearms, ammunition, or any regulated or serialized components. --- ### [International Information](https://www.atioutdoors.com/international-information/) **Published:** June 3, 2026 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Int.-Info-Header.png) # International Information **ATI DOES NOT SHIP RETAIL ORDERS INTERNATIONALLY**. See the list below to find an ATI distributor in your country. **Canada** - ATI has many Distributors and dealers internationally. Most local firearms retailers can order in a desired ATI product for you even if they don't have it in-stock - just ask! If you do not see your country listed, cannot locate items in your country, or you want to become an international dealer/distributor please contact our international sales staff at This website lists prices for the United States only. International prices can average significantly higher than USA prices because of the following: import duties, proof house charges, VAT tax, including special handling/shipping costs, customs fees and import/export license fees, etc Items purchased from ATI may not be transferred, transshipped on a non-continuous voyage or be otherwise disposed of in any other country than the United States of America, either in their original form or after being incorporated into other end items without the prior written approval of the US Department of State. The following list shows ATI International distributors by country, these distributors may sell directly or point you to a dealer in your area. **Country** **ATI Importer**AustraliaCleaver ArmsAustraliaHerron Security & SportCanadaNorth SylvaCanadaBowmacCanadaAl Flaherty'sCanadaCanadian Safety SourceChileComercial Mario R. Ludwig S.A.FinlandAsetarvike.comFranceDrome Chasse TirGermanyGerman Tactical, Starshooter.deGreeceSons A. Kalkantzakos O.E.GuatemalaShooting Systems S.A.IrelandGowen & Bradshaw Ltd.ItalyDTG- Defense Technology Group SrlKazakhstanAlpamys LLPThailandMillpoint TradingSouth AfricaGuns and BowsATI Outdoors manufactures and sells firearm accessories only. We do not sell firearms, ammunition, or any regulated or serialized components. --- ### [Wholesaler Registration Form](https://www.atioutdoors.com/wholesaler-registration-form/) **Published:** May 15, 2024 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Wholesale-Registration-Header.png) Business Name (required) Name (required) Phone Number (required) Your Email (required) Address (required) City (required) Zip Code (required) State Code (required) Additional Information **Our business to business sales staff can also be reached at 414-202-0985 or please note this is for dealers and distributors ONLY and all other inquiries should be sent to ** --- ### [Order Tracking](https://www.atioutdoors.com/order-tracking/) **Published:** December 20, 2017 **Author:** bDAaDnXN6j **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Order-Tracking-Header.png) To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received. Order ID Billing email Track --- ### [Request for Return (RMA)](https://www.atioutdoors.com/request-for-return-jrc/) **Published:** October 30, 2025 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Online-Return-Header.png) Name (required) Phone Number (required) Your Email (required) Order Number (required) Part Number to be Returned (required) Reason for Return (required) No longer neededWrong item was sentProduct damagedItem defective or doesn't workBought the wrong itemMissing or broken partsBetter price availableDoes not fit my gunOther Additional Information Request for Return Policy Your satisfaction is important to ATI Outdoors. If you need to return a product, we will make every reasonable effort to satisfy your request. -ATI only accepts returns for items purchased on our website: www.atioutdoors.com – If you purchased your item from a different store/online retailer your item must be returned to where you originally purchased it. -ATI will accept returns for 100% of the product’s purchase price (minus any discounts applied) within 30 days of purchase. –Returns must not have been damaged, modified and/or missing parts. -If ATI is responsible for the return, we will pay all shipping charges, otherwise the customer is responsible for the return shipping. (see ATI’s Warranty Policy) -Customers must contact ATI before sending items back for return; ATI will then issue the customer and RMA # to return the item(s) in original new condition and packaging. -All refunds will be disbursed to the customer within 15 business days of receiving the return. -Returns received damaged, modified and/or missing parts will not be subject to a refund. -ATI’s Return & Warranty Policy is only valid for the original purchaser and is void in cases where the product is purchased second-hand. --- ### [Guest Return Request Form](https://www.atioutdoors.com/guest-return-request-form/) **Published:** May 20, 2024 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/Online-Return-Header.png) To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received. Order ID Billing email Track --- ### [Terms of Use, Popup](https://www.atioutdoors.com/terms-of-use-popup/) **Published:** April 8, 2026 **Author:** John Chvala **Content:** # [![](https://www.atioutdoors.com/wp-content/uploads/2026/04/ati_logo-removebg-300x210.png)](https://www.atioutdoors.com/) # ATI Outdoors # Terms of Use Terms of use of https://www.atioutdoors.com. ATI Outdoors manufactures and sells firearm accessories only. We do not sell firearms, ammunition, or any regulated or serialized components. # Terms of Use Last updated: January 02, 2026 Please read these terms and conditions carefully before using Our Service. # Restricted to Adults (18+ Only) ATI Outdoors is designed for and restricted to individuals over 18 years old. Individuals under 18 years of age are prohibited from accessing ATI Outdoors. # Interpretation and Definitions ## Interpretation The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural. ## Definitions For the purposes of these Terms and Conditions: - **Affiliate** means an entity that controls, is controlled by or is under common control with a party, where “control” means ownership of 50% or more of the shares, equity interest or other securities entitled to vote for election of directors or other managing authority. - **Account** means a unique account created for You to access our Service or parts of our Service. - **Company** (referred to as either “the Company”, “We”, “Us” or “Our” in this Agreement) refers to ATI Outdoors, 707 Beech Street, Grafton, WI. - **Country** refers to: Wisconsin, United States - **Feedback** means feedback, innovations or suggestions sent by You regarding the attributes, performance or features of our Service. - **Goods** refer to the items offered for sale on the Service. - **Orders** mean a request by You to purchase Goods from Us. - **Promotions** refer to contests, sweepstakes or other promotions offered through the Service. - **Service** refers to the Website. - **Terms and Conditions** (also referred as “Terms”) mean these Terms and Conditions that form the entire agreement between You and the Company regarding the use of the Service. - **Third-party Social Media Service** means any services or content (including data, information, products or services) provided by a third-party that may be displayed, included or made available by the Service. - **Website** refers to ATI Outdoors, accessible from https://www.atioutdoors.com/ - **You** means the individual accessing or using the Service, or the company, or other legal entity on behalf of which such individual is accessing or using the Service, as applicable. # Acknowledgement These are the Terms and Conditions governing the use of this Service and the agreement that operates between You and the Company. These Terms and Conditions set out the rights and obligations of all users regarding the use of the Service. Your access to and use of the Service is conditioned on Your acceptance of and compliance with these Terms and Conditions. These Terms and Conditions apply to all visitors, users and others who access or use the Service. By accessing or using the Service You agree to be bound by these Terms and Conditions. If You disagree with any part of these Terms and Conditions then You may not access the Service. Your access to and use of the Service is also conditioned on Your acceptance of and compliance with the Privacy Policy of the Company. Our Privacy Policy describes Our policies and procedures on the collection, use and disclosure of Your personal information when You use the Application or the Website and tells You about Your privacy rights and how the law protects You. Please read Our Privacy Policy carefully before using Our Service. # Accessibility For customers who need enhanced accessibility options, we’ve provided individualized options via the (wheelchair) tool on this page. Please select it if you need to adjust settings for your needs. # Placing Orders for Goods By placing an Order for Goods through the Service, You warrant that You legally capable (over 18 years old) of entering into binding contracts. ## Your Information If You wish to place an Order for Goods available on the Service, You may be asked to supply certain information relevant to Your Order including, without limitation, Your credit card number, the expiration date of Your credit card, Your billing address, and Your shipping information. You represent and warrant that: (i) You have the legal right to use any credit or debit card(s) or other payment method(s) in connection with any Order; and that (ii) the information You supply to us is true, correct and complete. By submitting such information, You grant us the right to provide the information to payment processing third parties for purposes of facilitating the completion of Your Order. ## Order Cancellation We reserve the right to refuse or cancel Your Order at any time for certain reasons including but not limited to: - Goods availability - Errors in the description or prices for Goods - Errors in Your Order We reserve the right to refuse or cancel Your Order if fraud or an unauthorized or illegal transaction is suspected. ### Your Order Cancellation Rights Any Goods you purchase can only be returned in accordance with these Terms and Conditions and Our [Return/Cancellation Policy.](https://www.atioutdoors.com/new-privacy/) Our Returns Policy forms a part of these Terms and Conditions. Please read our [Return/Cancellation Policy](https://www.atioutdoors.com/new-privacy/) to learn more about your right to cancel Your Order. Your right to cancel an Order only applies to Goods that are returned in the same condition as You received them. You should also include all of the products instructions, documents and wrappings. Goods that are damaged or not in the same condition as You received them or which are worn simply beyond opening the original packaging will not be refunded. You should therefore take reasonable care of the purchased Goods while they are in Your possession. We will reimburse You no later than 14 days from the day on which We receive Your order cancellation notice. We will use the same means of payment as You used for the Order, and You will not incur any fees for such reimbursement. You will not have any right to cancel an Order for the supply of any of the following Goods: - The supply of Goods made to Your specifications or clearly personalized. - The supply of Goods which according to their nature are not suitable to be returned, deteriorate rapidly or where the date of expiry is over. - The supply of Goods which are not suitable for return due to health protection or hygiene reasons and were unsealed after delivery. - The supply of Goods which are, after delivery, according to their nature, inseparably mixed with other items. - The supply of digital content which is not supplied on a tangible medium if the performance has begun with Your prior express consent and You have acknowledged Your loss of cancellation right. ## Availability, Errors and Inaccuracies We are constantly updating Our offerings of Goods on the Service. The Goods available on Our Service may be mispriced, described inaccurately, or unavailable, and We may experience delays in updating information regarding our Goods on the Service and in Our advertising on other websites. We cannot and do not guarantee the accuracy or completeness of any information, including prices, product images, specifications, availability, and services. We reserve the right to change or update information and to correct errors, inaccuracies, or omissions at any time without prior notice. ## Prices Policy The Company reserves the right to revise its prices at any time prior to accepting an Order. The prices quoted may be revised by the Company subsequent to accepting an Order in the event of any occurrence affecting delivery caused by government action, variation in customs duties, increased shipping charges, higher foreign exchange costs and any other matter beyond the control of the Company. In that event, You will have the right to cancel Your Order. ## Payments All Goods purchased are subject to a one-time payment. Payment can be made through various payment methods we have available, such as Visa, MasterCard, Affinity Card, American Express cards or online payment methods (PayPal, for example). Payment cards (credit cards or debit cards) are subject to validation checks and authorization by Your card issuer. If we do not receive the required authorization, We will not be liable for any delay or non-delivery of Your Order. # Promotions Any Promotions made available through the Service may be governed by rules that are separate from these Terms. If You participate in any Promotions, please review the applicable rules as well as our Privacy policy. If the rules for a Promotion conflict with these Terms, the Promotion rules will apply. # User Accounts When You create an account with Us, You must provide Us information that is accurate, complete, and current at all times. Failure to do so constitutes a breach of the Terms, which may result in immediate termination of Your account on Our Service. You are responsible for safeguarding the password that You use to access the Service and for any activities or actions under Your password, whether Your password is with Our Service or a Third-Party Social Media Service. You agree not to disclose Your password to any third party. You must notify Us immediately upon becoming aware of any breach of security or unauthorized use of Your account. You may not use as a username the name of another person or entity or that is not lawfully available for use, a name or trademark that is subject to any rights of another person or entity other than You without appropriate authorization, or a name that is otherwise offensive, vulgar or obscene. # Intellectual Property The Service and its original content (excluding Content provided by You or other users), features and functionality are and will remain the exclusive property of the Company and its licensors. The Service is protected by copyright, trademark, and other laws of both the Country and foreign countries. Our trademarks and trade dress may not be used in connection with any product or service without the prior written consent of the Company. # Your Feedback to Us You assign all rights, title and interest in any Feedback You provide the Company. If for any reason such assignment is ineffective, You agree to grant the Company a non-exclusive, perpetual, irrevocable, royalty free, worldwide right and licence to use, reproduce, disclose, sub-licence, distribute, modify and exploit such Feedback without restriction. # Links to Other Websites Our Service may contain links to third-party web sites or services that are not owned or controlled by the Company. The Company has no control over, and assumes no responsibility for, the content, privacy policies, or practices of any third party web sites or services. You further acknowledge and agree that the Company shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with the use of or reliance on any such content, goods or services available on or through any such web sites or services. We strongly advise You to read the terms and conditions and privacy policies of any third-party web sites or services that You visit. # Termination We may terminate or suspend Your Account immediately, without prior notice or liability, for any reason whatsoever, including without limitation if You breach these Terms and Conditions. Upon termination, Your right to use the Service will cease immediately. If You wish to terminate Your Account, You may simply discontinue using the Service. # Limitation of Liability Notwithstanding any damages that You might incur, the entire liability of the Company and any of its suppliers under any provision of this Terms and Your exclusive remedy for all of the foregoing shall be limited to the amount actually paid by You through the Service or 100 USD if You haven’t purchased anything through the Service. To the maximum extent permitted by applicable law, in no event shall the Company or its suppliers be liable for any special, incidental, indirect, or consequential damages whatsoever (including, but not limited to, damages for loss of profits, loss of data or other information, for business interruption, for personal injury, loss of privacy arising out of or in any way related to the use of or inability to use the Service, third-party software and/or third-party hardware used with the Service, or otherwise in connection with any provision of this Terms), even if the Company or any supplier has been advised of the possibility of such damages and even if the remedy fails of its essential purpose. Some states do not allow the exclusion of implied warranties or limitation of liability for incidental or consequential damages, which means that some of the above limitations may not apply. In these states, each party’s liability will be limited to the greatest extent permitted by law. # “AS IS” and “AS AVAILABLE” Disclaimer The Service is provided to You “AS IS” and “AS AVAILABLE” and with all faults and defects without warranty of any kind. To the maximum extent permitted under applicable law, the Company, on its own behalf and on behalf of its Affiliates and its and their respective licensors and service providers, expressly disclaims all warranties, whether express, implied, statutory or otherwise, with respect to the Service, including all implied warranties of merchantability, fitness for a particular purpose, title and non-infringement, and warranties that may arise out of course of dealing, course of performance, usage or trade practice. Without limitation to the foregoing, the Company provides no warranty or undertaking, and makes no representation of any kind that the Service will meet Your requirements, achieve any intended results, be compatible or work with any other software, applications, systems or services, operate without interruption, meet any performance or reliability standards or be error free or that any errors or defects can or will be corrected. Without limiting the foregoing, neither the Company nor any of the company’s provider makes any representation or warranty of any kind, express or implied: (i) as to the operation or availability of the Service, or the information, content, and materials or products included thereon; (ii) that the Service will be uninterrupted or error-free; (iii) as to the accuracy, reliability, or currency of any information or content provided through the Service; or (iv) that the Service, its servers, the content, or e-mails sent from or on behalf of the Company are free of viruses, scripts, trojan horses, worms, malware, timebombs or other harmful components. Some jurisdictions do not allow the exclusion of certain types of warranties or limitations on applicable statutory rights of a consumer, so some or all of the above exclusions and limitations may not apply to You. But in such a case the exclusions and limitations set forth in this section shall be applied to the greatest extent enforceable under applicable law. # Governing Law The laws of the Country, excluding its conflicts of law rules, shall govern this Terms and Your use of the Service. Your use of the Application may also be subject to other local, state, national, or international laws. # Disputes Resolution If You have any concern or dispute about the Service, You agree to first try to resolve the dispute informally by contacting the Company. # For European Union (EU) Users If You are a European Union consumer, you will benefit from any mandatory provisions of the law of the country in which you are resident in. # United States Legal Compliance You represent and warrant that (i) You are not located in a country that is subject to the United States government embargo, or that has been designated by the United States government as a “terrorist supporting” country, and (ii) You are not listed on any United States government list of prohibited or restricted parties. # Severability and Waiver ## Severability If any provision of these Terms is held to be unenforceable or invalid, such provision will be changed and interpreted to accomplish the objectives of such provision to the greatest extent possible under applicable law and the remaining provisions will continue in full force and effect. ## Waiver Except as provided herein, the failure to exercise a right or to require performance of an obligation under this Terms shall not effect a party’s ability to exercise such right or require such performance at any time thereafter nor shall be the waiver of a breach constitute a waiver of any subsequent breach. # Translation Interpretation These Terms and Conditions may have been translated if We have made them available to You on our Service. You agree that the original English text shall prevail in the case of a dispute. # Changes to These Terms and Conditions We reserve the right, at Our sole discretion, to modify or replace these Terms at any time. If a revision is material We will make reasonable efforts to provide at least 30 days’ notice prior to any new terms taking effect. What constitutes a material change will be determined at Our sole discretion. By continuing to access or use Our Service after those revisions become effective, You agree to be bound by the revised terms. If You do not agree to the new terms, in whole or in part, please stop using the website and the Service. # Contact Us If you have any questions about these Terms and Conditions, You can contact us: - By email: info@atioutdoors.com - By visiting this page on our website: https://www.atioutdoors.com/ - By phone number: [414-202-0985](tel:414-202-0985) 2026.01.01 --- ### [California Web Ordering Restrictions](https://www.atioutdoors.com/california-web-ordering-restrictions/) **Published:** April 7, 2026 **Author:** John Chvala **Content:** # **California Website Ordering Restrictions** California recently enacted Assembly Bill 1263**,** which introduces new requirements for the sale and shipment of certain firearm-related products, including age and identity verification and additional delivery restrictions. [**Read the full Bill be here.**](https://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=202520260AB1263) **Because of these changes, we’re unfortunately no longer able to sell or ship directly to customers in California starting January 1, 2026.** We know this may be frustrating, and we sincerely apologize for the inconvenience. We truly appreciate your support and understanding as we work to comply with these new regulations. --- ### [WP 2FA User Profile](https://www.atioutdoors.com/wp-2fa-config/) **Published:** March 18, 2026 **Author:** John Chvala **Content:** ## Two-factor authentication settings Add two-factor authentication to strengthen the security of your user account. Primary Method: HOTP (Email) Secondary Method(s): No enabled backup methods ### 2FA Configuration #### 2FA Setup Change 2FA Settings ## Passkeys - by WP2FA Passkeys make login easier and safer by replacing passwords with your fingerprint, face, or device PIN, reducing password risks and speeding up authentication. [Learn more about Passkeys.](https://melapress.com/support/kb/wp-2fa-activate-use-passkeys/?#utm_source=plugin&utm_medium=wp2fa&utm_campaign=passkeys_user) [Add a Passkey](#) [ Name ](#) [ Status ](#) [ Created ](#) [ Last used ](#) Actions [ Name ](#) [ Status ](#) [ Created ](#) [ Last used ](#) Actions 1password Enabled January 12, 2026 11:52 am September 8, 2026 11:10 am DisableRevoke Apple Enabled January 12, 2026 11:38 am September 4, 2026 4:05 pm DisableRevoke ATI Outdoors --- ### [Shop](https://www.atioutdoors.com/shop/) **Published:** August 26, 2021 **Author:** John Chvala --- ### [My Orders](https://www.atioutdoors.com/my-orders/) **Published:** December 15, 2017 **Author:** bDAaDnXN6j **Content:** \[dokan-my-orders\] --- ### [Advanced Search](https://www.atioutdoors.com/advanced-search/) **Published:** March 25, 2019 **Author:** bDAaDnXN6j **Content:** # Advanced Search Search× --- ### [Sitemap](https://www.atioutdoors.com/sitemap/) **Published:** March 25, 2019 **Author:** bDAaDnXN6j **Content:** \[html-sitemap\] --- ## HTML Blocks ### [Footer Retail](https://www.atioutdoors.com/?cms_block=footer-retail) **Published:** September 13, 2021 **Author:** John Chvala **Content:** ### **GET OUTSIDE. STAY UPDATED.** Exclusive offers, new product drops, and outdoor tips straight to your inbox. [Contact Us](/contact) [Frequently Asked Questions](/faq/) [Order Tracking](/order-tracking) [About Us](/about-us) [ ](https://facebook.com/ATIoutdoors) [ ](https://x.com/atioutdoors) [ ](https://www.instagram.com/atioutdoors) [ ](https://www.threads.com/@atioutdoors) [ ](https://www.youtube.com/@atioutdoors) [Wholesale Registration](/wholesaler-registration-form) [Dealer/Distributor Information](/dealer-distributor-information/) [International Information](/international-information/) [Terms & Conditions](/term-conditions) [ ![Alt text: ATI Outdoors logo](https://www.atioutdoors.com/wp-content/uploads/2026/04/ati_logo-removebg-150x105.png) ](/) [**A Worldwide Leader in Firearm Parts & Accessories.**](/) [Fast Shipping](/shipping) [Limited Lifetime Warranty](/limited-lifetime-warranty/) [Return/Cancellation Policy](/return-cancellation-policy/) [Start Online Return](/request-for-return-jrc) Grafton, WI 53024 414-202-0985 Standard Business Hours: Mon-Fri, 9:00 AM - 4:00 PM CST \*Shipping to the Contiguous US © 2026 ATI Outdoors. All Rights Reserved. 🇺🇸 American Made [Privacy Policy](/new-privacy/#privacy) **HTML Block Categories:** Uncategorized --- ### [Recently Viewed Products](https://www.atioutdoors.com/?cms_block=recently-viewed-products) **Published:** June 13, 2026 **Author:** John Chvala **Content:** #### Recently Viewed **HTML Block Categories:** Uncategorized --- ## Slides ### [ATI Main Hero Pic](https://www.atioutdoors.com/woodmart_slide/retail-slide-1/) **Published:** September 13, 2021 **Author:** John Chvala **Content:** UPGRADE WITH CONFIDENCE **Premium outdoor gear designed, tested, and built by ATI Outdoors.** **Sliders:** ATI Retail slider --- ### [ATI Mobile Hero Image](https://www.atioutdoors.com/woodmart_slide/ati-mobile-hero-image/) **Published:** May 23, 2026 **Author:** John Chvala **Sliders:** ATI Mobile Hero Image --- ## Popups ### [ATI Popup $25 Off](https://www.atioutdoors.com/?wd_popup=popup-2) **Published:** June 14, 2026 **Author:** John Chvala **Content:** ## GET $25 OFF ### Sign up today and get $25 off any order over $99\* Subscribe for exclusive email-only sales. *For new subscribers only. Enter coupon code in your cart. Only good at ATIOutdoors.com for orders over $99. [View our privacy policy.](https://www.atioutdoors.com/new-privacy/#privacy) **Popup Categories:** PopUp --- ## Custom Tabs ### [Shipping and Delivery](https://www.atioutdoors.com/?wd_product_tabs=shipping-and-delivery) **Published:** May 20, 2025 **Author:** John Chvala **Content:** ![](https://www.atioutdoors.com/wp-content/uploads/2026/06/ATI-Shipping.webp) ## Fast & Reliable Shipping ATI Outdoors ships orders quickly using UPS, FedEx, and USPS Priority Mail, depending on the items purchased. ### Shipping Details - Most orders ship within 24-48 hours or less. - Many orders ship the next business day, Monday through Friday. - Backordered items ship as soon as they become available. We currently ship within the United States, including Alaska and Hawaii at increased rates. ATI does not ship online orders internationally. **California notice:** Due to California Bill AB1263, we are unable to sell or ship to California as of 01/01/26. --- ## Products ### [Shotforce Shotgun Stock, GEN2](https://www.atioutdoors.com/product/shotforce-shotgun-stock/) **Published:** February 24, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Shotforce Pistol Grip Style Shotgun Stock - Compact for Transport and Carry - GEN2 TactLite Six-Position Adjustable Stock - TracLOCK System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Eliminates the Need for Secondary Locking Mechanisms - Dual-Sided QD Attachment Point - No Snag Points - X1 Recoil Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Length of Pull: 12 1/8″ – 15″ - Easy Installation - Adapters for All Supported Models Included - All Mounting Hardware Included - Scratch-proof and Weatherproof - Extreme Temperature Glass Reinforced Polymer Stock - Limited Lifetime Warranty - Made in the USA Warning! – Do Not Over Tighten Screws (Stripped holes and broken screw heads aren’t covered under the warranty) *Mount Patent # 6,374,528 B1* **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Stocks **Product ATI Colors:** Black, FDE (Flat Dark Earth), Urban Combat **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [X2 TactLite Recoil Pad Upgrade](https://www.atioutdoors.com/product/x2-tactlite-pad-upgrade/) **Published:** March 3, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Compatibility - ATI’s TactLite Stock ## Product Highlights - X2 TactLite Recoil Reducing Butt-Pad - Upgraded 1 1/2″ Thick Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Mounting Plate Included - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Classic Shotgun Heatshield](https://www.atioutdoors.com/product/classic-shotgun-heatshield/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Steel Formed Shotgun Heatshield - Elongated Cooling Slots for Maximum Dissipation of Heat - Easy Installation – Simply Slide Over Barrel and Secure With Supplied Hardware - 13-1/2″ Long - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Heat Shields --- ### [Shotforce Shell Holder](https://www.atioutdoors.com/product/shotforce-shell-holder/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Shotforce Shell Holder **Content:** ## **Product Highlights** - Shotforce Stock Shell Holder - Holds Five Rounds - Quick & Easy Access to Extra 12 Ga Rounds - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Side-Saddle & Shell Holders --- ### [T3 GEN2 Shotgun Stock and Forend](https://www.atioutdoors.com/product/t3-shotgun-stock-and-forend/) **Published:** June 20, 2023 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** **Stock:** - T3 Pistol Grip GEN2 Shotgun Stock - Compact for Transport & Carry - Length of Pull: 13 1/8″ to 16 5/8″ - TactLite GEN2 6-Position Adjustable Mil-Spec Stock - TracLOCK GEN2 System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Eliminates the Need for Secondary Locking Mechanisms - Dual-Sided QD Attachment Point - No Snag Points - X Series Recoil Reducing Pistol Grip - Buil-In X Series Recoil Absorbing Backstrap - Slim Ergonomic Design - Sure-Grip Texture for Increase Control - X2 Recoil Reducing Butt-Pad - Upgraded 1 1/4″ Thick Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Slot for Tactical Sling Attachment - Adjustable/Removable Cheekrest - Elongated Design to Fit All Users - Cheekrest Provides ½” of Vertical Adjustment - Easy Installation - Universal Mount System - Securely Fasten your Tactical Stock with no Specialized Tools - Mounts Included for All Supported Models in One Package - All Mounting Hardware Included **Forend:** - - Tactical Shotgun Picatinny Rail Package - One Left 2″ Picatinny Rail - One Right 2″ Picatinny Rail - Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories - Blank Inserts for When Rails are Not in Use - Textured Forend - Very Tough, yet Extremely Lightweight - **Note:** Mossberg forends require a 6 3/4″ slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4″ slide action tube. - The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product. - Scratchproof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, New, Stocks, Stocks **Product ATI Colors:** Black --- ### [T3 Shotgun Stock Adapter for Savage 320 2017-Current](https://www.atioutdoors.com/product/t3-shotgun-stock-adapter-for-savage-320-2017-current/) **Published:** August 7, 2020 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Savage Stevens 320 12ga Shotguns 2017 to current with precision 3D manufactured mounting system adapter. - This is just the adapter, you must also have the T3 Stock system for this. [Click here](https://www.atioutdoors.com/product/t3-stock/) for the T3 Stock. ## **Product Highlights** - T3 Stevens 320 12ga 3D printed adapter - Easy Installation - Savage 320, 2017 to current Universal Mount System - Securely Fasten your Tactical Stock with no Specialized Tools - Mount Included for Savage 320, 2017 to current in one Package - All Mounting Hardware Included - Weatherproof - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Slings, Mounts & Adapters, Stocks --- ### [Shotforce Top-Folding Shotgun Stock](https://www.atioutdoors.com/product/shotforce-top-folding-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Top-Folding Shotgun Stock - Compact for Transport & Carry - Can be Fired in Opened or Folded Position - Quick Release Button Allows Stock to Lock in Folded/Unfolded Position - Textured Pistol Grip - Ambidextrous - Pre-Drilled to Accept Shotgun Shell Holder - Easy Installation - Mounts for All Supported Models Included - Some Minor Modification may be Required - Sling Swivel Stud Included - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA Mount Patent # 6,374,528 B1 ***Note** Some Minor Modification may be Required.* **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Stocks **Product ATI Colors:** Black, FDE (Flat Dark Earth), Urban Combat --- ### [Shotforce Top-Folding Shotgun Stock, Marine Edition](https://www.atioutdoors.com/product/marine-top-folding-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Marine Edition Top-Folding Stock - Can be Fired in Opened or Folded Position - Quick Release Button Allows Stock to Lock in Folded/Unfolded Position - Textured Pistol Grip - Ambidextrous - Pre-Drilled to Accept Shotgun Shell Holder - Some Minor Modification may be Required - Easy Installation - Sling Swivel Stud Included - Marine Edition – Includes Stainless Steel Hardware - Stow Anywhere & Never Worry About Deterioration in Humid/Coastal Climates! - Extreme Temperature Glass Reinforced Polymer Stock - Manufactured in the USA - Limited Lifetime Warranty Mount Patent # 6,374,528 B1 **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [T3 Rear Pistol Grip](https://www.atioutdoors.com/product/t3-rear-pistol-grip/) **Published:** December 16, 2013 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - T3 Shotgun Rear Pistol Grip - Most Comfortable Shotgun Rear Pistol Grip on the Market - X Series Recoil Reducing Pistol Grip - Buil-In X Series Recoil Absorbing Backstrap - Slim Ergonomic Design - Sure-Grip Texture for Increase Control - QD Attachment Point at the Rear of the Grip - Universal Mount System - Securely Fasten your Rear Pistol Grip with no Specialized Tools - Mounts Included for All Supported Models in One Package - All Mounting Hardware Included - Scratch proof & Weatherproof - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [T3 Shotgun Rear Pistol Grip Combo Package](https://www.atioutdoors.com/product/t3-shotgun-rear-pistol-grip-combo-package/) **Published:** July 11, 2022 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** **Pistol Grip:** - T3 Pistol Grip - Most Comfortable Shotgun Rear Pistol Grip on the Market - X Series Recoil Reducing Pistol Grip - Buil-In X Series Recoil Absorbing Backstrap - Slim Ergonomic Design - Sure-Grip Texture for Increase Control - QD Attachment Point at the Rear of the Grip - Universal Mount System - Securely Fasten your Rear Pistol Grip with no Specialized Tools - Mounts Included for All Supported Models in One Package - All Mounting Hardware Included - Scratchproof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Forend:** - - Tactical Shotgun Picatinny Rail Package - One Left 2″ Picatinny Rail - One Right 2″ Picatinny Rail - Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories - Blank Inserts for When Rails are Not in Use - Textured Forend - Very Tough, yet Extremely Lightweight - Mossberg forends require a 6 3/4″ slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4″ slide action tube. - The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 Inches are Required for use of this Product. - Scratchproof & Weatherproof - DuPont Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Gen 2 Side Saddle:** - CNC Machined 6061 T6 Aluminum - Military Type III Anodized - Integrated Top Rail - Military Type III Anodizing - 9 Shell customizable configuration - Military grade reinforced synthetic material - Shell holders mount in any location on the side saddle - Mount as many or as few shell holders as desired - Sleek Skeletonized Side Saddle Design - Limited Lifetime Warranty *Side Saddle Patent US 8,316,569 B1* **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, Stocks, Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Winchester SXP Top-Folding Shotgun Stock Adapter](https://www.atioutdoors.com/product/winchester-sxp-top-folding-shotgun-stock-adapter/) **Published:** January 19, 2023 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Shotforce SXP Top-Folding precision 3D manufactured mounting system adapter. - Easy Installation - Winchester SXP Mount System - Securely Fasten your Tactical Stock with no Specialized Tools - Mount Included for Winchester SXP - All Mounting Hardware Included - Weatherproof - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Slings, Mounts & Adapters, Stocks, Winchester SXP --- ### [T3 Shotgun Stock Adapter for Winchester 1200/1300 12ga & 20ga (proud fit)](https://www.atioutdoors.com/product/t3-shotgun-stock-adapter-for-winchester-1200-1300-12ga-20ga-proud-fit/) **Published:** May 24, 2022 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits Winchester 1200/1300 12ga & 20ga (proud fit) with precision 3D manufactured mounting system adapter. - This is just the adapter, you must also have the T3 Stock system for this. [Click Here](https://www.atioutdoors.com/product/t3-stock/) for the T3 Stock ## **Product Highlights** - T3 Winchester 1200/1300 12ga & 20ga (proud fit) with precision 3D manufactured mounting system adapter. - Easy Installation - Mount System - Securely Fasten your Tactical Stock with no Specialized Tools - Mount Included for Winchester 1200/1300 12ga & 20ga (proud fit) - All Mounting Hardware Included - Weatherproof - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 20 GA Stocks, Accessories & Parts, Parts, Slings, Mounts & Adapters --- ### [T3 Shotgun Rear Pistol and Forend](https://www.atioutdoors.com/product/t3-shotgun-rear-pistol-and-forend/) **Published:** May 7, 2023 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** **Pistol Grip:** - T3 Pistol Grip - Most Comfortable Shotgun Rear Pistol Grip on the Market - X Series Recoil Reducing Pistol Grip - Buil-In X Series Recoil Absorbing Backstrap - Slim Ergonomic Design - Sure-Grip Texture for Increase Control - QD Attachment Point at the Rear of the Grip - Universal Mount System - Securely Fasten your Rear Pistol Grip with no Specialized Tools - Mounts Included for All Supported Models in One Package - All Mounting Hardware Included - Scratchproof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Forend:** - - Tactical Shotgun Picatinny Rail Package - One Left 2″ Picatinny Rail - One Right 2″ Picatinny Rail - Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories - Blank Inserts for When Rails are Not in Use - Textured Forend - Very Tough, yet Extremely Lightweight - **Note:** Mossberg forends require a 6 3/4″ slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4″ slide action tube. - The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 Inches are Required for use of this Product. - Scratchproof & Weatherproof - DuPont Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **DIRECT FITS:** - Mossberg 500/590/590S 12GA with Tapped Receiver - Mossberg Shockwave®, SBS/NFA regulations may apply **FITS WITH MODIFICATIONS\*** Maverick 88, Remington 870, Winchester SXP \*Modified fit will require gunsmithing to drill and tap receiver holes. Includes 8/32 screws with thread patch *Mossberg 500/590 Models* **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, New, Stocks, Stocks **Product ATI Colors:** Black --- ### [Winchester SXP Side-Folding Shotgun Stock Adapter](https://www.atioutdoors.com/product/winchester-sxp-side-folding-shotgun-stock-adapter/) **Published:** June 19, 2023 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Strikeforce SXP Side-Folding precision 3D manufactured mounting system adapter. - Easy Installation - Winchester SXP Universal Mount System - Securely Fasten your Tactical Stock with no Specialized Tools - Mount Included for Winchester SXP - All Mounting Hardware Included - Weatherproof - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Slings, Mounts & Adapters, Stocks, Winchester SXP --- ### [Strikeforce GEN2 Side-Folding Shotgun Stock](https://www.atioutdoors.com/product/strikeforce-shotgun-stock/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Stock Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TactLite GEN2 Six-Position Adjustable Stock with TracLOCK System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - Extreme Temperature Glass Reinforced Polymer Buffer Tube - X1 Recoil Reducing Pistol Grip - Sure-Grip Texture - Recoil Impact is Absorbed - Not Affected by Chemicals or Extreme Temperatures - X2 Recoil Reducing Butt-Pad - Upgraded 1 1/4″ Thick Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Adapters for All Supporting Models Included - All Mounting Hardware Included - Scratch Proof & Weatherproof - Limited Lifetime Warranty - Made in the USA Mount Patent # 6,374,528 B1 & Grip Patent # 8,561,338 B2 **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Stocks, Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [AR Buffer](https://www.atioutdoors.com/product/ar-15-buffer/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Compatibility - AR-15 and AR Variants ## Product Highlights - Constructed of Military Type III Anodized, 6061 T6 Aluminum - Works with Commercial, Military and Hybrid Buffer Tubes - Virtually Indestructible - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [AR Sling Swivel Adapter](https://www.atioutdoors.com/product/ar-15-sling-swivel-adapter-kit/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Compatibility - ATI’s AR-15 6 & 8-Sided Forends ## Product Highlights - Laser Etched Sling Swivel - Easy Installation - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Slings, Mounts & Adapters --- ### [QD Push Button Base to Swivel Stud Adapter](https://www.atioutdoors.com/product/qd-to-swivel-stud-adapter/) **Published:** November 23, 2016 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits QD Mounts ## **Product Highlights** - QD Quick-Disconnect Push Button Base to Swivel Stud Adapter - Converts Standard Swivel Locking Studs to Modern Push Button Swivel - Use A Push Button QD Sling on Any Rifle - Attach the Adaptor to Any Swivel Stud - Easy Installation for QD Sling Adaptation – No Drilling or Sewing Needed - Great for Use with ATI Strikeforce, Shotforce, & Monte Carlo Stocks - Pair with Single, Two, or Three Point QD Sling for Modern Functionality - 1 Pack – Adapters Sold Individually - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Slings, Mounts & Adapters **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [SKS Bipod](https://www.atioutdoors.com/product/sks-bipod/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** SKS Non-Swivel Bipod **Content:** ## **Compatibility** - All SKS Rifles ## **Product Highlights** - Mounts to Bayonet Lug. Push “Snap-N-Lock” Button to Fold Legs Forward, Rearward or Downward. - Fixed Bipod - Easily Adjusts from 9” to 13” - Weighs Only 6 Oz. - Non-Slip Rubber Feet - Will Not Scratch, Rust or Dent - Hardware Included - Weatherproof - DuPont® Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts --- ### [AR-15 Stainless Steel Shark Muzzle Brake – Recoil Reduction](https://www.atioutdoors.com/product/ar-15-223-5-56-stainless-steel-shark-muzzle-brake-w-crush-washer/) **Published:** April 4, 2018 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Product Highlights - Recoil reducing with crush washer - CNC machined out of high quality solid stainless steel block - .233 / 5.56 Shark muzzle brake – Recoil Reduction - Side and Top ported to reduce back pressure - High polish stainless steel finish - 1/2″-28 thread with crush washer included **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts --- ### [6" Aluminum Picatinny Rail](https://www.atioutdoors.com/product/strikeforce-6-inch-picatinny-rail/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits ATI’s Strikeforce Stock for Ruger® Mini-14®/Mini-Thirty® ## **Product Highlights** - Military Type III Anodized, - Mount all of Your Favorite Accessories - Loctite on Screws - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Strikeforce GEN2 Side-Folding Shotgun Stock, Stoeger](https://www.atioutdoors.com/product/strikeforce-gen2-side-folding-shotgun-stock-stoeger/) **Published:** June 24, 2026 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Stock Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TactLite GEN2 Six-Position Adjustable Stock with TracLOCK System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - Extreme Temperature Glass Reinforced Polymer Buffer Tube - X1 Recoil Reducing Pistol Grip - Sure-Grip Texture - Recoil Impact is Absorbed - Not Affected by Chemicals or Extreme Temperatures - X2 Recoil Reducing Butt-Pad - Upgraded 1 1/4″ Thick Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Precision 3D manufactured mounting system for Stoeger - All Mounting Hardware Included - Scratch Proof & Weatherproof - Limited Lifetime Warranty - Made in the USA Mount Patent # 6,374,528 B1 & Grip Patent # 8,561,338 B2 **Product brands:** ATI Outdoors **Product categories:** New, Stocks **Product ATI Colors:** Black --- ### [Tactlite Shotgun Stock and X2 Grip](https://www.atioutdoors.com/product/t3-gen2-shotgun-stock-and-x2-ar-15-grip/) **Published:** March 12, 2025 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Mossberg 590R & 590RM 12ga ## **Product Highlights** ### **Stock** - Tactlite Shotgun Stock - Compact for Transport & Carry - Length of Pull: 12″ to 15″ - TactLite GEN2 6-Position Adjustable Mil-Spec Stock - TracLOCK GEN2 System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Eliminates the Need for Secondary Locking Mechanisms - Dual-Sided QD Attachment Point - No Snag Points - X2 Recoil Reducing Butt-Pad - Upgraded 1 1/4″ Thick Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Slot for Tactical Sling Attachment - Adjustable/Removable Cheekrest - Elongated Design to Fit All Users - Cheekrest Provides ½” of Vertical Adjustment - Easy Slide on Installation ### **X2 Grip** The ATI X2 Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift. - - - V2 Sure Grip Texture - Built-In X Series Backstrap - Increased Size to Cushion/Protect Hand Through Web of Thumb - Eliminates the Punch of the Recoil - Recoil Impact is Absorbed – Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals, Load Size or Extreme Temperatures - Specifically Engineered Grip Dimensions Create the Optimal Distance from the Grip to the Trigger to Fit Most Hands - Rear Tang & Curved Base makes for Consistent Hand Placement and Reduces Muzzle Lift - Specific Contours for Repeatable Hand Placement - Finger Elevation Contour Leads Finger to Trigger - Vertical Angle of Grip Allows For Improved Comfort & Hand Positioning - Enables the Shooter to Keep Elbow Tight to the Body even with Body Armor or Fully Collapsed Adjustable Stock - Elevates Hand to the Perfect Height which Aligns the Index Finger with the Trigger - Easy Installation - Uses Original Mounting Hardware - Scratchproof & Weatherproof - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** New, Stocks **Product ATI Colors:** Black --- ### [AR 15 223/5.56 Stainless Steel Crush Washer pack – 5 pcs](https://www.atioutdoors.com/product/ar-15-223-5-56-stainless-steel-crush-washer-pack-5-pcs/) **Published:** April 4, 2018 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Product Highlights - Stainless Steel Crush Washer pack – 5 pcc - High polish stainless steel - Premium Crush Washers made of the highest quality components available - Fits over 1/2″-28 threads **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts --- ### [AR Carbine Length Black Nitride Gas Tube - 9.75"](https://www.atioutdoors.com/product/carbine-length-stainless-steel-gas-tube-9-75-2/) **Published:** March 21, 2018 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Compatibility** - AR-15 Carbine Black Nitride Steel Gas Tube – 9.75″ ## **Product Highlights** - Material: Black Nitride Steel - Mil-Spec Dimensions - Length: 9.75″ - Works with Low-Profile Gas Block for Installation - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [X2 Taurus® Small Frame Grip](https://www.atioutdoors.com/product/x2-small-frame-grip/) **Published:** May 27, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights - X2 Taurus Small-Frame Revolver Grip - V2 Sure Grip Texture - Built-In X Series Backstrap - Increased Size to Cushion/Protect Hand Through Web of Thumb - Eliminates the Punch of the Recoil - Recoil Impact is Absorbed – Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals, Load Size or Extreme Temperatures - Specifically Engineered Grip Dimensions Create the Optimal Distance from the Grip to the Trigger to Fit Most Hands - Rear Tang & Curved Base makes for Consistant Hand Placement and Reduces Muzzle Lift - Specific Contours for Repeatable Hand Placement - Finger Elevation Contour Leads Finger to Trigger - Vertical Angle of Grip Allows For Improved Comfort & Hand Positioning - Enables the Shooter to Keep Elbow Tight to the Body even with Body Armor or Fully Collapsed Adjustable Stock - Elevates Hand to the Perfect Height which Aligns the Index Finger with the Trigger - Easy Installation - Limited Lifetime Warranty - Made in the USA **Note:** Due to production variances in the frames of OEM Taurus revolvers there may be a slight difference in fit from one revolver to another. *Scorpion Grip Patent # 8,561,338 B2 Patent Pending Pistol Grip* **Product brands:** ATI Outdoors **Product categories:** Taurus **Product ATI Colors:** Black --- ### [AR-10 .308 Model Steel Shark Muzzle Brake w/Crush washer](https://www.atioutdoors.com/product/ar-10-308-model-steel-shark-muzzle-brake-w-crush-washer/) **Published:** October 15, 2019 **Author:** John Chvala **Excerpt:** AR-10 .308 Steel Shark Muzzle Brake w/Crush Washer **Content:** ## **Compatibility** - AR-10 .308 Steel Shark Muzzle Brake w/Crush washer ## **Product Highlights** - CNC machined out of high quality solid steel block. - .308 Shark muzzle brake - Side and Top ported to reduce back pressure - Black Parkerized Finish - Crush Washer Included **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [AR 15 223/5.56 Steel Crush Washer pack – 5 pcs](https://www.atioutdoors.com/product/ar-15-223-5-56-steel-crush-washer-pack-5-pcs/) **Published:** April 5, 2018 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Product Highlights - .56 Steel Crush Washer pack – 5 pcc - Black Oxide Finishing - Premium Crush Washers - Fits over 1/2″-28 threads **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts --- ### [Saiga Scorpion Recoil Pistol Grip](https://www.atioutdoors.com/product/saiga-scorpion-recoil-pistol-grip-2/) **Published:** December 26, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights The ATI Saiga Scorpion Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. The Saiga Scorpion Pistol Grip increases the shooter’s comfort while reducing the muzzle lift. - Scorpion Recoil Pistol Grip - Recoil Impact is Absorbed - Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter - Not Affected by Chemicals - Eliminates the Felt Punch of the Recoil - Removes Limitations from Spring and Piston Type Recoil Suppression Systems - Ergonomic Design - Sure-Grip Texture - Easy Installation - Virtually Indestructible - DuPont® Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts **Product ATI Colors:** Black --- ### [AR-10 .308 Military Buffer Tube Assembly](https://www.atioutdoors.com/product/ar-10-308-military-buffer-tube-assembly/) **Published:** October 15, 2019 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - AR-10 and AR Variants ## **Product Highlights** - AR-10 Military-Spec Buffer Tube - Military Diameter Threads for Maximum Fit into AR-15 Receiver - Constructed of Military Type III Anodized, 6061 T6 Aluminum - Includes Steel Military Grade E-Coated Castle Nut and Locking Ring - Includes AR-15 Recoil Plug & Buffer Spring - Virtually Indestructible - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [AR 15 223/5.56 Steel Muzzle Brake Jam Nut](https://www.atioutdoors.com/product/ar-15-223-5-56-steel-muzzle-brake-jam-nut/) **Published:** April 4, 2018 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Product Highlights - Steel Muzzle Brake Jam Nut - Fits rifles .223/5.56mm - Heat treated steel - CNC precision machined - Black oxide finish - Corrosion resistant - 1/2″x28 thread **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts --- ### [AR Carbine Length Stainless Steel Gas Tube - 9.75"](https://www.atioutdoors.com/product/carbine-length-stainless-steel-gas-tube-9-75/) **Published:** March 21, 2018 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Compatibility** - AR-15 Carbine Length Stainless Steel Gas Tube – 9.75″ ## **Product Highlights** - Material: Stainless Steel - Mil-Spec Dimensions - Length: 9.75″ - Works with Low-Profile Gas Block for Installation. - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Mauser Stock, 98](https://www.atioutdoors.com/product/mauser-98-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Futuristic Style Rifle Stock - Ergonomic Design for Increased Comfort - Built-In Weaver Scope Mount - Can Use Scout Type Scope - X Series Recoil Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Not Affected by Chemicals or Extreme Temperatures - Easy “Drop-In” Installation - No Gunsmithing Required - Sling Swivel Stud - Some minor modification may be required. - Weatherproof - Scratch Resistant - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA Turn your Surplus Mauser into a Modern Scout Rifle! **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Woodland Brown --- ### [AR-15 Commercial Buffer Tube Assembly](https://www.atioutdoors.com/product/commercial-buffer-tube-assembly/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits AR-15 and AR Variants. Not Compatible with AR-10 or .308 Rifles. ## **Product Highlights** - Commercial Diameter Tube for Optimal Fit into Commercial Buttstock - Constructed of Military Type III Anodized, 6061 T6 Aluminum - Includes Steel Castle Nut and Locking Ring - Includes AR-15 Recoil Plug and Buffer Spring - Virtually Indestructible - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [Shotforce REM7600 Stock](https://www.atioutdoors.com/product/shotforce-rem7600-stock/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Shotforce Pistol Grip Style Rifle/Shotgun Stock - TactLite Six-Position Adjustable Stock - Stock Changes Length of Pull From 9 1/4” to 13 3/4” - Compact for Transport/Carry - X1 Recoil Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Adapters for All Supported Models Incluiding - All Mounting Hardware Included - Scratch proof And Weatherproof - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty Mount Patent # 6,374,528 B1 **Product brands:** ATI Outdoors **Product categories:** Stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Fiberforce Saiga Stock](https://www.atioutdoors.com/product/fiberforce-saiga-stock/) **Published:** December 25, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights - Thumbhole Grip Stock - Dragunov/Military Style - Built-In Cheekrest - Dowel Sling Mount - Ambidextrous - DuPont® Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA ****SEC 922R:*** *Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.** **Product brands:** ATI Outdoors **Product categories:** Stocks, Stocks **Product ATI Colors:** Black --- ### [Fiberforce Recoil Pad](https://www.atioutdoors.com/product/fiberforce-recoil-pad/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Not Affected by Chemicals or Extreme Temperatures - Non-Slip Removable Rubber Recoil Pad - Simply Slip-On - Absorbs Recoil - Adds 1″ Length - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts --- ### [AR-15 Castle Nut](https://www.atioutdoors.com/product/castle-nut/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Compatibility - Steel Castle Nut - Works with Commercial, Military and Hybrid Buffer Tubes - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Shotforce Rossi Stock Package](https://www.atioutdoors.com/product/shotforce-rossi-stock-package/) **Published:** June 24, 2026 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Shotforce Pistol Grip Style Stock & Forend Package - Compact for Transport and Carry - Length of Pull: 10 3/4” to 14 3/4” - Textured Grip for Increased Control & Accuracy - Ribbed Forend Provides Stable Forward Grip for All Shooters - Swivel Stud Sling Attachment - Some Minor Modification may be Required - Easy Installation - All Mounting Hardware Included - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** New, Stocks, stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [AR Sling Adapter for Polymer Forends](https://www.atioutdoors.com/product/ar-15-sling-adapter/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Compatibility** - Fits Most AR-15 Polymer Forends ## **Product Highlights** - Laser Etched Sling Swivel - Includes Swivel Stud - Fits Round Mil-Spec Handguards - Easy Installation - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Slings, Mounts & Adapters --- ### [AR-15 / AR-10 Military Buffer Tube](https://www.atioutdoors.com/product/ar-15-ar-10-military-buffer-tube/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits AR-15 / AR-10 Rifles. ## **Product Highlights** - Military Diameter Threads for Maximum Fit into AR-15 / AR-10 Receiver - Constructed of Military Type III Anodized, 6061 T6 Aluminum - 6 Standard Mil-Spec Stock Locking Positions - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [AR-15 Commercial Buffer Tube](https://www.atioutdoors.com/product/commercial-buffer-tube/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Commercial Diameter Tube for Maximum Fit into Commercial Buttstock - Constructed of Military Type III Anodized, 6061 T6 Aluminum - 6 Standard Mil-Spec Stock Locking Positions - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [AR-15 Buffer Spring](https://www.atioutdoors.com/product/ar-15-buffer-spring/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Compatibility - AR-15 and AR Variants ## Product Highlights - Works with Commercial, Military and Hybrid Buffer Tubes - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts --- ### [AK-47 GEN2 Elite Stock](https://www.atioutdoors.com/product/ak-47-elite-stock/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Adjustable Tactlite GEN2 6-Position Mil-Spec Stock - Mil-Spec Diameter for Maximum Fit Onto Mil-Spec Buffer Tubes - Positive Locking System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Non-Slip Recoil Pad - Dual-Sided QD Attachment Point - Slot for Tactical Sling Attachment - Receiver Mount & All Mounting Hardware Included - Removable/Adjustable Tactical Cheekrest - Elongated Design to Fit All Users - Includes Cheekrest with ½” of Vertical Adjustment - Extreme Reinforced Polymer - Limited Lifetime Warranty - Manufactured in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Remington Mag-Socket](https://www.atioutdoors.com/product/remington-mag-socket/) **Published:** January 27, 2021 **Author:** John Chvala **Excerpt:** Remington 12 GA Mag-Socket Wrench Forend Removal Tool **Content:** ## Compatibility - 12 Ga Remington 870 Shotguns ## Product Highlights Change forends without having to worry about disassembling your receiver. ATI has developed the Mag Socket Wrenches that allows for quick changes of any forend, including all ATI forends, for Remington shotguns. - Allows for Easy Disassembly and Installation of Forends - Reduces the Amount of Time it Takes to Change Forends - Prevents Disassembly of Action to Change the Forend - Checkered Grip - Laser Etched Lettering - Precision CNC Machined - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Forends, Forends, Parts --- ### [AR-15 Pistol Buffer Tube Assembly](https://www.atioutdoors.com/product/pistol-buffer-tube-assembly/) **Published:** June 4, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights - AR-15 Pistol Buffer Tube Assembly - Constructed of Military Type III Anodized, 6061 T6 Aluminum - Mil-Spec Tube Diameter for Proper Fit to Specified Manufacturer’s Range for the Sig Brace, etc. - Military Diameter Threads for Maximum Fit into AR-15 Receiver - Vynafoam Padded Tube Cap - Includes Steel Military Grade E-Coated Castle Nut and Locking Ring - Includes AR-15 Recoil Plug & Buffer Spring - Virtually Indestructible - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Stocks --- ### [Fiberforce SKS Stock](https://www.atioutdoors.com/product/fiberforce-sks-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** SKS Fiberforce Thumbhole Rifle Stock **Content:** ## **Product Highlights** - Thumbhole Grip Rifle Stock - Dragunov/Military Design - Ventilated Forearm - Dowel Sling Mount - Adjustable Cheekrest - Improved Secure Cheekrest Locking Bolt - Ambidextrous - Blade Bayonet must be removed for installation of ATI Stock - Some Minor Modification may be Required - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA The Ultimate in Military Styling with the Exclusive Fiberforce Dragunov Design! **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black --- ### [Mauser Bolt Handle](https://www.atioutdoors.com/product/mauser-bolt-handle/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Product Highlights** - Stainless Steel - A “Wide-Arc” Bolt Measures 1.25” or Greater From the Flat Surface of the Stock to the Top of the Bolt Handle - Straight Bolt – Must Convert - “Wide Arc” Bolt – Must Convert - Standard Bent Bolt – No Conversion - Includes Drill Bit, Tap, Hardware and Instructions - Extreme Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [Low Profile AR-15 / AR-10 Gas Block](https://www.atioutdoors.com/product/low-profile-ar-15-ar-10-gas-block/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Compatibility** - Fits Standard size .750″ AR-15 & AR-10 Barrels ## **Product Highlights** - Low Profile Gas Block was designed to allow an extended handguard to cover the gas return area of the barrel. - Machined from Steel and Black Nitride Finish - includes 2 set screws to hold the block in place - Weight 1.5oz - Material: 105 Steel - Coating Black Nitride - Military Type - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Forend Accessories, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [CZ 512 AR-22 Kit](https://www.atioutdoors.com/product/cz-512-ar-22-kit/) **Published:** June 30, 2021 **Author:** bDAaDnXN6j **Excerpt:** CZ 512 AR-22 Adjustable TactLite Stock Kit **Content:** ## **Compatibility** - CZ 512 Rifles ## **Product Highlights** - Six Position Adjustable TactLite Stock - TracLOCK System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - X2 Recoil System - Thin X2 Recoil Pad - Non-Slip, Removable - X2 Recoil Pistol Grip - V2 Sure-Grip Texture - Recoil Impact is Absorbed - Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter - Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals\\ - Remains Flexible in Extreme Temperatures - Eliminates the Felt Punch of the Recoil - Removes Limitations from Spring and Piston Type Recoil Suppression Systems - 6-Sided Forend - Polymer Forend Mount - Barrel Block Mount – Stabilizes Forend & Improves Accuracy - Full-Length 22″ Low-Profile Picatinny Rail – Ability to Mount Optics & Accessories - Polymer Flush Stock Mount - Made in the USA - Limited Lifetime Warranty *Scorpion Grip Patent # 8,561,338 B2* *Forend Patent # 8,215,046 B2* *Patent Pending Stock System* **Product brands:** ATI Outdoors **Product categories:** CZ, New, Stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Monte Carlo SKS Stock](https://www.atioutdoors.com/product/monte-carlo-sks-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** Ideal for Sport Shooting, Hunting and More! - Monte Carlo Style Rifle Stock - Checkered Grip & Forend - Raised Cheek/Cheekrest Area - X Series Recoil Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Not Affected by Chemicals or Extreme Temperatures - Easy Drop-In Installation – No Gunsmithing Required - Some Minor Modification may be Required (Blade Bayonet must be removed to install Stock) - Swivel Stud Sling Attachment - Scratch Resistant - Weatherproof - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Woodland Brown --- ### [Shotforce H&R/NEF Stock Package](https://www.atioutdoors.com/product/shotforce-hr-nef-stock/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Shotforce Pistol Grip Style Stock & Forend Package - Compact for Transport and Carry - Length of Pull: 10 3/4” to 14 3/4” - Textured Grip for Increased Control & Accuracy - Ribbed Forend Provides Stable Forward Grip for All Shooters - Swivel Stud Sling Attachment - Some Minor Modification may be Required - Easy Installation - All Mounting Hardware Included - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks, Stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [AR-22, 2" Picatinny Rail](https://www.atioutdoors.com/product/2-inch-ar-22-picatinny-rail/) **Published:** April 20, 2017 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - ATI’s AR-22 Kit for the Ruger 10/22 Only ## **Product Highlights** - 2″ AR-22 Picatinny Rail - Military Type III Anodized, 6061 T6 Aluminum - Mount all of Your Favorite Accessories - Loctite on Screws - Limited Lifetime Warranty - Made in the USA Warning!!! – Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts --- ### [AK-47 Fiberforce Stock Package](https://www.atioutdoors.com/product/fiberforce-ak-47-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Thumbhole Grip Rifle Stock - Dragunov/Military Style - Built-In Cheekrest - Matching Ventilated Handguards - Dowel Sling Mount - Ambidextrous - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black --- ### [Strikeforce AK-47 GEN2 Stock](https://www.atioutdoors.com/product/strikeforce-ak-47-stock/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - TactLite GEN2 Six-Position Adjustable Stock - Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TracLOCK GEN2 System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - X Series Thin Recoil Pad - Non-Slip, Removable - Slot for Tactical Sling Attachment - All Mounting Hardware Included - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Fiberforce Stock fits Ruger® 10/22®](https://www.atioutdoors.com/product/fiberforce-10-22-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Thumbhole Grip Stock - Dragunov/Military Design - Lightweight – Weighs Only 26 oz! - Easy Drop-In Installation - Ventilated Forearm and Handguard - Built-In Cheekrest - Sling Swivel Studs - Dowel Sling Mount - Scratch Resistant - Weatherproof - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black --- ### [4" Aluminum Picatinny Rail](https://www.atioutdoors.com/product/4-inch-aluminum-picatinny-rail-3/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits ATI’s AR-15 6-Sided Free Float Forends ## **Product Highlights** - 4″ Picatinny Rail - Military Type III Anodized, 6061 T6 Aluminum - Mount all of Your Favorite Accessories - Loctite on Screws **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Picatinny Rails --- ### [Heavy Duty Push Button Swivels, Black](https://www.atioutdoors.com/product/push-button-swivels/) **Published:** December 5, 2016 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - 1-1.25″ Slings ## **Product Highlights** - 2 Pack – Push Button Swivels in Black - Manganese Phosphate Finish - Converts Slings to Modern Push Button Swivel - Use A Push Button QD Sling on Any RIfle - 1.25″ Loop – Attach the Push Button Swivel to Any 1″-1 1/4″ Sling - Stainless Steel Construction - Anti-Glare Finish - Pull-Tested Up to 450 Pounds of Pressure - Limited Lifetime Warranty - Manufactured in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Slings, Mounts & Adapters **Product ATI Colors:** Black --- ### [Monte Carlo Mosin Stock](https://www.atioutdoors.com/product/mosin-nagant-monte-carlo-stock/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Monte Carlo Rifle Stock with Checkered Forearm & Grip - Easy Drop-In Installation - Constructed of DuPont® Extreme Reinforced Polymer - X Series Recoil Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Not Affected by Chemicals or Extreme Temperatures - Raised Cheekrest - Two Sling Swivel Studs - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Woodland Brown --- ### [LOP Quick Stop](https://www.atioutdoors.com/product/lop-quick-stop/) **Published:** April 2, 2025 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Mil-Spec Aluminum Buffer Tubes and Mil-Spec Stocks. ## **Compatibility** - Length of Pull (LOP), the distance from the back of the stock to the trigger - LOP Quick Stop Provides Repeatable Positioning each time you adjust your stock - LOP Quick Stop, Machined out of 6061 T6 Black Anodized Aluminum - Anti-Rattle spring - Works with Mil-Spec Buffer Tubes and Stocks - Patent Pending - Limited Lifetime Warranty - Made in the USA - **\*Stock is not included** **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, New, Parts, Slings, Mounts & Adapters, Stocks, Stocks --- ### [Akita Forend](https://www.atioutdoors.com/product/akita-forend/) **Published:** February 20, 2023 **Author:** John Chvala **Excerpt:** Akita Shotgun Forend **Content:** ## Product Highlights - Ergonomic Forend Design with Sure-Grip Texture - Weatherproof - Very Tough, yet Extremely Lightweight - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Forends, Forends, Forends, Forends, Forends **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [TactLite GEN2 AR-15 / AR-10 Mil-Spec Stock](https://www.atioutdoors.com/product/tactlite-mil-spec-stock/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - AR-15 / AR-10 or any Firearm with Military Buffer Tube. (Buffer Tube is NOT Included with this Stock) ## **Product Highlights** - TactLite GEN2 Adjustable Rifle Stock - M4 Style - Weighs Only 6.20 Oz - TracLOCK GEN2 System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Locks Down Firm with One Lever – No Need for Secondary Locking Mechanisms - No Interference with the Charging Handle - No Snag Points - X Series Thin Butt-Pad - Non-Slip, Removable - Upgrade to an X1 or X2 Recoil Reducing Pad! Less Recoil and Greater Length of Pull! - Dual Sided QD Sling Attachment Points - Dual Slots for Tactical Sling Attachment - Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks, Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [SKS Gasport Cleaning Tool](https://www.atioutdoors.com/product/sks-gasport-cleaning-tool-3-pack/) **Published:** April 5, 2012 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Product Highlights - Eliminates Carbon Build Up - Kit includes 3 metal cleaning brushes. - *To Use:* - Disassemble the Rifle - Insert the Gas Port Reamer into the Gas Port of the SKS - Turn the Reamer *Clockwise* until Fouling is Removed **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Sale --- ### [Tactlite Shotgun Stock Mossberg 990](https://www.atioutdoors.com/product/t3-gen2-shotgun-stock-mossberg-990/) **Published:** October 8, 2025 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Mossberg 990 Aftershock 12ga, SBS/NFA regulations may apply. ## **Product Highlights** - Tactlite Shotgun Stock - Compact for Transport & Carry - Length of Pull: 13.25″ to 16.75″ - TactLite GEN2 6-Position Adjustable Mil-Spec Stock - TracLOCK GEN2 System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - X Series Recoil Reducing Pistol Grip - Built-In X Series Recoil Absorbing Backstrap - Slim Ergonomic Design - Sure-Grip Texture for Increase Control - X2 Recoil Reducing Butt-Pad - Upgraded 1 1/4″ Thick Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Dual Sided QD Sling Attachment Points - Dual Slots for Tactical Sling Attachment - Adjustable/Removable Cheekrest - Elongated Design to Fit All Users - Cheekrest Provides ½” of Vertical Adjustment - Easy Installation - Mount System - Presion 3D manufactured mounting system for Mossberg 990 AFTERSHOCK - Securely Fasten your Tactical Stock with no Specialized Tools - All Mounting Hardware Included - Scratch Proof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** New, Stocks **Product ATI Colors:** Black --- ### [TactLite GEN2 Cheekrest](https://www.atioutdoors.com/product/tactlite-cheekrest-kit/) **Published:** February 5, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - ATI TactLite GEN2 Stock Only ## **Product Highlights** - Removable/Adjustable Cheekrest - Elongated Design to Fit All Users - Includes Cheekrest with ½” of Adjustment - The cheekrest kit may impede the function of the charging function on AR-15 rifles unless the stock is in the fully extended position. - The cheekrest kit was designed for use on other shotgun & rifle platforms. **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [TactLite GEN2 AR-15 Mil-Spec Stock & Buffer Tube Assembly Package](https://www.atioutdoors.com/product/tactlite-mil-spec-stock-buffer-assembly/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - TactLite GEN2 Adjustable Rifle Stock - Six-Position M4 Style - Weighs Only 6.10 Oz - TracLOCK GEN2 System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Locks Down Firm with One Lever – No Need for Secondary Locking Mechanisms - No Interference with the Charging Handle - No Snag Points - X Series Thin Butt-Pad - Non-Slip, Removable - Upgrade to an X1 or X2 Recoil Reducing Pad! Less Recoil and Greater Length of Pull! - Dual Sided QD Attachment Point - Slot for Tactical Sling Attachment - Six Position, Mil-Spec (Military) Buffer Tube - Mil-Spec Diameter Tube for Maximum Fit into the Mil-Spec Stock - Constructed of Military Type III Anodized, 6061 T6 Aluminum - Includes Steel Military Grade E-Coated Castle Nut and Locking Ring - Includes AR-15 Recoil Plug & Buffer Spring - Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Shotgun Mag Clamp](https://www.atioutdoors.com/product/shotgun-mag-clamp/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits: All 12 Ga Shotguns ## **Product Highlights** - Strengthen the Connection of the Mag Extension to the Barrel - May Also be Used to Mount 1″ Diameter Light or Laser to Barrel - Includes Sling Swivel Stud - Swivel Stud is Reversible for Right or Left-Handed Shooters - Easy Installation - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts --- ### [AR-15 Military Buffer Tube Assembly](https://www.atioutdoors.com/product/military-buffer-tube-assembly/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** AR-15 Military Buffer Tube Assembly **Content:** ## **Compatibility** - Fits AR-15 and AR Variants. Not Compatible with .308 Rifles. ## **Product Highlights** - AR-15 Military-Spec Buffer Tube - Military Diameter Threads for Maximum Fit into AR-15 Receiver - Constructed of Military Type III Anodized, 6061 T6 Aluminum - Includes Steel Military Grade E-Coated Castle Nut and Locking Ring - Includes AR-15 Recoil Plug & Buffer Spring - Virtually Indestructible - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [Mosin Bolt Handle](https://www.atioutdoors.com/product/mosin-nagant-bolt-handle/) **Published:** December 31, 2011 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Compatibility** - Fits Most Round and Hex Receivers - Due to the large production quantities and variations of this rifle as well as the manufacturing principles used during the production period some modification may be needed. If you do not possess the equipment or skill set necessary for installation, we recommend that an accredited gunsmith completes the installation process. ## **Product Highlights** - Bolt Handle Made of Polished Stainless Steel - Assembly Hardware, Drill Bit, Tap and Detailed Instructions Included - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts --- ### [Universal Bipod](https://www.atioutdoors.com/product/universal-bipod/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Any Firearm with a Sling Swivel Stud - Customer assembly required to determine Swivel or Non-Swivel Configuration or AR-15 Configuration. Push “Snap-N-Lock” Button to Fold Legs Forward, Rearward or Downward. ## **Product Highlights** - Can Swivel or Remain Fixed - Easily Adjusts from 9” to 13” - Weighs Only 6 Oz. - Non-Slip Rubber Feet - Allows Use of a Sling and Extra Sling Swivel Stud Included - Mounts to Any Rifle Sling Swivel Stud - Includes Stock Protective Pad - Will Not Scratch, Rust or Dent - Hardware Included - DuPont® Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts, Sale, Slings, Mounts & Adapters --- ### [Shotforce Shotgun Forend](https://www.atioutdoors.com/product/shotforce-forend/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Shotforce Shotgun Forend **Content:** ## **Product Highlights** - No jamming! Designed not to overlap the shotgun’s receiver when cycling the pump action, thereby, reducing the chance of a momentary jam by sling or clothing - Easy removal and installation - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forends, Forends, Forends, Forends, Forends --- ### [Fiberforce SKS Cheekrest](https://www.atioutdoors.com/product/sks-fiberforce-cheekrest/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** SKS Fiberforce Stock Cheekrest **Content:** ## **Product Highlights** - Improves Comfort and Sighting - Room to Store a Cleaning Kit - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [Swivel Stud, 2pc](https://www.atioutdoors.com/product/swivel-stud-kit/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## Product Highlights - 2 Quantity Pack - Easy Installation - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Slings, Mounts & Adapters --- ### [T3 Shotgun Rear Pistol Grip, Mossberg 990](https://www.atioutdoors.com/product/t3-shotgun-rear-pistol-grip-mossberg-990/) **Published:** October 23, 2025 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## Compatibility - Mossberg 990 Aftershock 12ga, SBS/NFA regulations may apply. ## Product Highlights - T3 Shotgun Rear Pistol Grip - Most Comfortable Shotgun Rear Pistol Grip on the Market - X Series Recoil Reducing Pistol Grip - Buil-In X Series Recoil Absorbing Backstrap - Slim Ergonomic Design - Sure-Grip Texture for Increase Control - QD Attachment Point at the Rear of the Grip - Easy Mounting Installation - Securely Fasten your Rear Pistol Grip with no Specialized Tools - Precision 3D manufactured mounting system for Mossberg 990 AFTERSHOCK - All Mounting Hardware Included - Scratch Proof & Weatherproof - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Mossberg / Maverick, New, Stocks **Product ATI Colors:** Black --- ### [X2 Taurus® Large Frame Grip](https://www.atioutdoors.com/product/x2-large-frame-grip/) **Published:** February 18, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights - X2 Taurus Large-Frame Revolver Grip - V2 Sure Grip Texture - Built-In X Series Backstrap - Increased Size to Cushion/Protect Hand Through Web of Thumb - Eliminates the Punch of the Recoil - Recoil Impact is Absorbed – Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals, Load Size or Extreme Temperatures - Specifically Engineered Grip Dimensions Create the Optimal Distance from the Grip to the Trigger to Fit Most Hands - Rear Tang & Curved Base makes for Consistant Hand Placement and Reduces Muzzle Lift - Specific Contours for Repeatable Hand Placement - Finger Elevation Contour Leads Finger to Trigger - Vertical Angle of Grip Allows For Improved Comfort & Hand Positioning - Enables the Shooter to Keep Elbow Tight to the Body even with Body Armor or Fully Collapsed Adjustable Stock - Elevates Hand to the Perfect Height which Aligns the Index Finger with the Trigger - Easy Single Screw Installation - Limited Lifetime Warranty - Made in the USA *Scorpion Grip Patent # 8,561,338 B2 Patent Pending Pistol Grip* **Product brands:** ATI Outdoors **Product categories:** Taurus **Product ATI Colors:** Black --- ### [Halo Heatshield GEN2](https://www.atioutdoors.com/product/halo-heatshield-gen2/) **Published:** June 11, 2025 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** The Halo Heatshield GEN2 with new and improved anti-vibration silicone pads and redesigned picatinny rails to limit movement. The rear of the Heatshield is secured to the rear of the barrel with a Extreme Temperature Polymer Clip while the front of the Heatshield is suspended above the shotgun barrel by two Extreme Temperature Polymer V Blocks. Both the Rear Clip and Front site tab include a High Temp Resistant Silicon pad that can withstand temperatures, more than 600˚F. - The Industry’s First Ever Free Float Style Design to Prevent any Metal-to-Metal Contact Between the Heatshield and Shotgun Barrel - Heatshield is constructed of High Strength Steel With a Matte Black Powder Coating - Extreme Temperature Polymer Clip and V Blocks Secure the Heatshield to the Shotgun Preventing Sliding and Movement of the Heatshield - High Temp Resistant Silicon Pads Protect the Shotgun Barrel Finish - Includes 2 Aluminum CNC Machined Picatinny Rails - Front polymer sight - Fits With or Without an Aftermarket Mag Extension - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Heat Shields, New --- ### [Hi-Point Stock](https://www.atioutdoors.com/product/hi-point-stock/) **Published:** June 8, 2017 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Hi-Point Rifle Stock - Ergonomic Modern Design - Textured Grip Area - Ambidextrous - Includes Front & Rear Sling Studs - Some minor modification may be required. - Original receiver cover barrel bolts are required for installation of Hi-Point 9MM Carbine models - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black --- ### [Classic AR-15 / AR-10 Grip](https://www.atioutdoors.com/product/classic-grip-black/) **Published:** May 9, 2017 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Classic AR Pistol Grip - Ergonomic Design - Great for Shooters of All Hand Sizes - Finger Grooves Designed to Fit Nearly All Shooters - Sure-Grip Texture for Increased Control - Rugged 1-Piece Design - Easy Installation - Uses Original Mounting Hardware - Scratch-proof & Weatherproof - DuPont® Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Grips, Grips, Parts **Product ATI Colors:** Black --- ### [Sling Swivel](https://www.atioutdoors.com/product/ati-sling-swivel/) **Published:** June 25, 2013 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdors **Content:** ## Compatibility - Standard Sling Swivel Studs ## Product Highlights - Easy Installation - High Quality E-Coated Steel - Accepts up to 1 1/4″ Wide Slings - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Slings, Mounts & Adapters --- ### [AK-47 Strikeforce Handguard](https://www.atioutdoors.com/product/strikeforce-ak-handguard/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Strikeforce Rifle Handguards - Ergonomic Design - Non-Slip Textured - Accent Lines Provide Additional Grip - Ventilated Upper and Lower Handguards - Four Forward Picatinny Rail Locations - One 4″ Picatinny Rail - Two 2″ Picatinny Rails - One 2″ Picatinny Rails with Swivel Stud - Blank Inserts for When Rails are Not In Use - Rails are Removable and Interchangeable - Count Towards US Compliance Parts - Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Universal Cheekrest](https://www.atioutdoors.com/product/universal-cheekrest/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Easy Installation - Installs on Original Wood Stocks - Raises Eye Level Position for Improved Accuracy - Velcro Strip May be Used as an Alternative to Drilling Stock - Hardware Included - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts, Slings, Mounts & Adapters --- ### [Monte Carlo Enfield Stock, #1 MK3](https://www.atioutdoors.com/product/enfield-monte-carlo-stock-no-1-mk-3/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** Update your Enfield with a classic design! - Two Sling Swivel Studs - Raised Cheekrest - Checkered Grip & Forearm - Scratch Resistant - Easy Drop-In Installation - DuPont® Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Woodland Brown --- ### [Hunting Slings](https://www.atioutdoors.com/product/hunting-slings/) **Published:** November 11, 2024 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## Compatibility - Pick from Standard Sling Swivel connection or QD Sling swivel connection ## Product Highlights - Adjustable length from 30″ – 42″ - 1.25″ width web slings - Sewn in swivels - Non-slip shoulder grip - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Forends, H&R/NEF, New, Parts, Slings, Mounts & Adapters **Product Sling Swivel:** QD Sling Swivel, Standard Sling Swivel --- ### [Classic AR-15/10 Mil-Spec Stock](https://www.atioutdoors.com/product/classic-ar-15-10-mil-spec-stock/) **Published:** August 7, 2020 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits AR-15 / AR-10 or any Firearm with Military Buffer Tube ## **Product Highlights** - Classic Adjustable Rifle Stock - M4 Style - Weighs Only 6.10 Oz - Smooth and Secure Stock Adjustments - No Interference with the Charging Handle - No Snag Points - Upgrade to an X1 or X2 Recoil Reducing Pad! Less Recoil and Greater Length of Pull! - Sling swivel stud Attachment Point - Slot for Tactical Sling Attachment - Buffer tube is not included - Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Sale, Stocks, Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Monte Carlo Enfield Stock, #4 MK1/2/5](https://www.atioutdoors.com/product/enfield-monte-carlo-stock-no-4-mk-1-2-5/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** Update your Enfield with a classic design! - Two Sling Swivel Studs - Raised Cheekrest - Checkered Grip & Forearm - Scratch Resistant - Easy Drop-In Installation - Some Minor Modification may be Required - DuPont® Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Woodland Brown --- ### [MOS/WIN Mag-Socket](https://www.atioutdoors.com/product/mossberg-winchester-mag-socket-wrench/) **Published:** January 27, 2021 **Author:** bDAaDnXN6j **Excerpt:** Mossberg/Winchester 12 GA Mag-Socket Wrench Forend Removal Tool **Content:** ## Product Highlights Change forends without having to worry about disassembling your receiver. ATI has developed the Mag Socket Wrenches that allows for quick changes of any forend, including all ATI forends, for Mossberg and Winchester shotguns. - Allows for Easy Disassembly and Installation of Forends - Reduces the Amount of Time it Takes to Change Forends - Prevents Disassembly of Action to Change the Forend - Checkered Grip - Laser Etched Lettering - Precision CNC Machined - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Forends, Forends, Forends, Parts --- ### [AR-22, 4" Picatinny Rail](https://www.atioutdoors.com/product/4-inch-aluminum-picatinny-rail-2/) **Published:** April 20, 2017 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - ATI’s AR-22 for the Ruger 10/22 ## **Product Highlights** - 4″ AR-22 Picatinny Rail - Military Type III Anodized, 6061 T6 Aluminum - Mount all of Your Favorite Accessories - Loctite on Screws - Manufactured in the USA - Limited Lifetime Warranty Warning!!! – Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts --- ### [AK-47 GEN2 Elite Package](https://www.atioutdoors.com/product/ak-47-tactlite-elite-package-2/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Adjustable Tactlite GEN2 6-Position Mil-Spec Stock - Mil-Spec Diameter for Maximum Fit Onto Mil-Spec Buffer Tubes - Positive Locking System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - Weighs Only 5.85 Ounces - No Snag Points - Non-Slip Recoil Pad - Dual-Sided QD Attachment Point - Slot for Tactical Sling Attachment - Receiver Mount & All Mounting Hardware Included - Ventilated Upper and Lower Handguards - Ergonomic Design - Non-Slip textured - One 4″ Picatinny Rail - Two 2″ Picatinny Rails - One 2″ Picatinny Rails with Swivel Stud - Rails are Removable and Interchangeable - Blank Inserts for When Rails are Not In Use - Recoil Pistol Grip - Non-Slip Texture - Recoil Impact is Absorbed - Eliminates the Felt Punch of the Recoil - Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter - Not Affected by Chemicals, Load Size or Extreme Temperatures - Includes Steel T-Nut and Bolt - Removable/Adjustable Tactical Cheekrest - Elongated Design to Fit All Users - Includes Cheekrest with ½” of Vertical Adjustment - Extreme Reinforced Polymer - Limited Lifetime Warranty - Manufactured in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [X1 TactLite Recoil Pad Upgrade](https://www.atioutdoors.com/product/x1-recoil-pad/) **Published:** March 3, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Compatibility - ATI’s TactLite Stocks ## Product Highlights - X1 TactLite Recoil Reducing Butt-Pad - 1″ Thick Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Mounting Plate INcluded - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [X1 AK-47 Grip](https://www.atioutdoors.com/product/ak-47-x1-grip/) **Published:** December 26, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - X1 Recoil Reducing Pistol Grip - Ergonomic Design - Great for Shooters of All Hand Sizes - Sure-Grip Texture for Increased Control - Built-In X Series Recoil Absorbing Backstrap - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Includes Steel T-Nut and Steel Bolt - Scratchproof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Grips **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [2" Aluminum Picatinny Rail](https://www.atioutdoors.com/product/2-inch-aluminum-picatinny-rail/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits ATI’s AR-15 6 & 8-Sided Aluminum Free Float Forends ## **Product Highlights** - 2″ Picatinny Rail - Military Type III Anodized, 6061 T6 Aluminum - Mount all of Your Favorite Accessories - Loctite on Screws - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Parts, Picatinny Rails --- ### [Shotforce Forend Pistol Grip, FPG](https://www.atioutdoors.com/product/shotforce-fpg/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Mossberg/Remington/Winchester 12-Gauge Shotforce Shotgun Pistol Grip Forend **Content:** ## **Product Highlights** - Shotforce Forend Pistol Grip - Slim Ergonomic Design for Comfort - Textured 2-Finger Grip for Increased Control & Accuracy - Easy Installation - Adapters for All Supported Models Included - DuPont® Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Forends, Forends, Forends, Forends, Forends --- ### [SKS Handguard](https://www.atioutdoors.com/product/sks-handguard/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Ventilated to dissipate heat - Matches ATI Stocks - Protects Your Hands From the Heat of the Gun - DuPont® Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts --- ### [Strikeforce Side-Folding Stock Mossberg 990](https://www.atioutdoors.com/product/strikeforce-gen2-side-folding-stock-mossberg-990/) **Published:** October 8, 2025 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Mossberg 990 Aftershock 12ga, SBS/NFA regulations may apply. ## **Product Highlights** - Stock Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TactLite GEN2 Six-Position Adjustable Stock with TracLOCK System - Length of Pull (LOP): 14″ to 17.5″ - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - Extreme Temperature Glass Reinforced Polymer Buffer Tube - X1 Recoil Reducing Pistol Grip - Sure-Grip Texture - Recoil Impact is Absorbed - Not Affected by Chemicals or Extreme Temperatures - X2 Recoil Reducing Butt-Pad - Upgraded 1 1/4″ Thick Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Easy Mounting Installation - Precision 3D manufactured mounting system for Mossberg 990 AFTERSHOCK - All Mounting Hardware Included - Scratch Proof & Weatherproof - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** New, Stocks **Product ATI Colors:** Black --- ### [AR-15 Steel Shark Muzzle Brake – Recoil Reduction](https://www.atioutdoors.com/product/ar-15-223-5-56-steel-shark-muzzle-brake-w-crush-washer/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Product Highlights** - Recoil reducing with crush washer - CNC machined out of high quality solid steel block - .233 / 5.56 Shark muzzle brake - Side and Top ported to reduce back pressure - Black oxide finish - 1/2″-28 thread with crush washer included **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Forend Accessories, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Fiberforce Marlin Stock](https://www.atioutdoors.com/product/fiberforce-marlin-stock/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Thumbhole Grip Stock - Dragunov/Military Design - Lightweight – Weighs Only 26 oz! - Easy Drop-In Installation - Ventilated Forearm and Handguard - Built-In Cheekrest - Two Sling Swivel Studs - Dowel Sling Mount - Some Minor Modification may be Required - Scratch Resistant - Weatherproof - Extreme Temperature Glass Reinforced Polymer Stock - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, FDE (Flat Dark Earth), Urban Combat --- ### [Shotforce Pistol Grip, RPG](https://www.atioutdoors.com/product/shotforce-rpg/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Shotgun Rear Pistol Grip **Content:** ## **Product Highlights** - Shotforce Rear Pistol Grip - AR-Style Pistol Grip - Slim Ergonomic Design for Comfort - Textured Grip for Increased Control & Accuracy - Top-Mounted Sling Loop - Easy Installation - Includes Adapters for All Supported Models - Includes All Mounting Hardware - DuPont® Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA Mount Patent # 6,374,528 B1 **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [AR-15 / AR-10 Locking Ring](https://www.atioutdoors.com/product/ar-15-ar-10-locking-ring/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** AR-15 / AR-10 Locking Ring **Content:** ## Compatibility - AR-15 / AR-10 ## Product Highlights - Steel Locking Ring - Works with Commercial, Military and Hybrid Buffer Tubes - Virtually Indestructible - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Strikeforce GEN2 AK-47 Package](https://www.atioutdoors.com/product/strikeforce-ak-47-package/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Six-Position Adjustable Side-Folding Strikeforce GEN2 Stock with X2 Recoil System, Ventilated Handguards, Pistol Grip and Adjustable Cheekrest - 6-Position Adjustable Side-Folding GEN1 Stock - Can be Fired from Folded Position - TracLOCK GEN2 System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - Dual-Sided QD Attachment Point - X2 Recoil Pistol Grip - Non-Slip Texture - Recoil Impact is Absorbed - Eliminates the Felt Punch of the Recoil - Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter - Not Affected by Chemicals, Load Size or Extreme Temperatures - Includes Steel T-Nut and Bolt - Ergonomic, Textured and Ventilated Upper and Lower Handguards - 4 Picatinny Rails - One 4” Picatinny Rail - Two 2” Picatinny Rails - One 2” Picatinny Rail with Swivel Stud - Blank Inserts for when Rails are not in use - Removable/Adjustable Tactical Cheekrest - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - Slot for Tactical Sling Attachment - 1 Sling Swivel Stud - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [X2 AR-15 / AR-10 Grip](https://www.atioutdoors.com/product/x2-pistol-grip-2/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights The ATI AR-15 / AR-10 X2 AR-15 Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift. - X2 AR-15 / AR-10 Pistol Grip - V2 Sure Grip Texture - Built-In X Series Backstrap - Increased Size to Cushion/Protect Hand Through Web of Thumb - Eliminates the Punch of the Recoil - Recoil Impact is Absorbed – Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals, Load Size or Extreme Temperatures - Specifically Engineered Grip Dimensions Create the Optimal Distance from the Grip to the Trigger to Fit Most Hands - Rear Tang & Curved Base makes for Consistant Hand Placement and Reduces Muzzle Lift - Specific Contours for Repeatable Hand Placement - Finger Elevation Contour Leads Finger to Trigger - Vertical Angle of Grip Allows For Improved Comfort & Hand Positioning - Enables the Shooter to Keep Elbow Tight to the Body even with Body Armor or Fully Collapsed Adjustable Stock - Elevates Hand to the Perfect Height which Aligns the Index Finger with the Trigger - Easy Installation - Uses Original Mounting Hardware - Scratchproof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA *Scorpion Grip Patent # 8,561,338 B2* *Patent Pending AR-15 Grip* **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Grips, Grips, Parts **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Gen2 Halo Aluminum Side Saddle](https://www.atioutdoors.com/product/gen2-halo-aluminum-side-saddle-2/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** ATI Outdoors **Content:** ## **Product Highlights** - CNC Machined 6061 T6 Aluminum - Military Type III Anodized - Integrated Top Rail - Military Type III Anodizing - 9 Shell customizable configuration - Military grade reinforced synthetic material - Shell holders mount in any location on the side saddle - Mount as many or as few shell holders as desired - Sleek Skeletonized Side Saddle Design - Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty - Limited Lifetime Warranty *Side Saddle Patent US 8,316,569 B1* **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Side Saddle & Add-a-Shell, Side-Saddle, Side-Saddle, Side-Saddle & Shell Holders **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Shotforce Shotgun Stock, GEN2 and Forend](https://www.atioutdoors.com/product/shotforce-shotgun-stock-gen2-and-forend/) **Published:** August 5, 2023 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** ### **Stock:** - Shotforce Pistol Grip Style Shotgun Stock - Compact for Transport and Carry - GEN2 TactLite Six-Position Adjustable Stock - TracLOCK System - Provides Smooth Secure Stock Adjustments - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Eliminates the Need for Secondary Locking Mechanisms - Dual-Sided QD Attachment Point - No Snag Points - X1 Recoil Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Length of Pull: 12 1/8″ – 15″ - Easy Installation - Adapters for All Supported Models Included - All Mounting Hardware Included - Scratch-proof and Weatherproof - Extreme Temperature Glass Reinforced Polymer Stock - Limited Lifetime Warranty - Made in the USA ### **Forend:** - - Tactical Shotgun Picatinny Rail Package - One Left 2″ Picatinny Rail - One Right 2″ Picatinny Rail - Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories - Blank Inserts for When Rails are Not in Use - Textured Forend - Very Tough, yet Extremely Lightweight - **Note:** Mossberg forends require a 6 3/4″ slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4″ slide action tube. - The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product. - Scratch proof & Weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, New, Stocks **Product ATI Colors:** Black --- ### [Strikeforce SKS GEN2 Stock](https://www.atioutdoors.com/product/strikeforce-sks-stock/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - TactLite GEN2 Six-Position Adjustable Stock - Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TracLOCK GEN2 System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - X Series Thin Recoil Pad - Non-Slip, Removable - X1 Style Pistol Grip - Sure-Grip Texture - Recoil Impact is Absorbed - Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals or Extreme Temperatures - Four Forward Picatinny Rail Locations - One 4” Picatinny Rail - Three 2” Picatinny Rails - One 2” Swivel Stud Picatinny Rail - Blank Covers for Unused Rail Locations - Additional Ventilation in Forend and Top Cover - Slots for Tactical Sling Attachment - Two Sling Swivel Studs - All Mounting Hardware Included - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [Add-a-Shell (3 Piece)](https://www.atioutdoors.com/product/add-a-shell/) **Published:** December 7, 2012 **Author:** bDAaDnXN6j **Excerpt:** Add-a-Shell Shot Shell Holders (3 Quantity Pack) [Fits Mossberg ATI Scorpion Package] **Content:** ## Product Highlights - Modular Add-a-Shell Shotgun Shell Holders - Includes Three Add-A-Shells - Military Grade Synthetic Construction - Add as Many Individual Shell Holders as Desired in any Configuration - Secures Shotgun Shell Firmly in Place - Limited Lifetime Warranty - Made in the USA **Warning! – Do Not Over Tighten Screws** Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Parts, Side Saddle & Add-a-Shell, Side-Saddle, Side-Saddle, Side-Saddle & Shell Holders --- ### [AR-15 / AR-10 Pistol Grip Screw and Star Lock Washer](https://www.atioutdoors.com/product/ar-15-ar-10-pistol-grip-screw-and-star-lock-washer/) **Published:** February 7, 2018 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - AR-15 / AR-10 & AR Variants ## **Product Highlights** - AR-15 / AR-10 Hex Head Pistol Grip Screw Set - Use for a new build or as a replacement for that frustrating OEM flat head screw. - Steel ¼-28 x 1” Hex bolt - Steel Star washer - Military Type - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Grips, Grips, Parts **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [TactLite Stock Shell Carrier](https://www.atioutdoors.com/product/tactlite-shell-carrier/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits ATI TactLite GEN1/GEN2 Stocks with Cheekrest Attached ## **Product Highlights** - Stock-Mounted Shell Carrier - Holds 5 12 Gauge Shotgun Shells - Military Type III Anodized, Mounting Bar - Includes All 5 Shell Holders - Military Grade Synthetic Construction - Lightweight; Only 2.3 Ounces or 65 Grams - Mounts to the Cheekrest While Still Allowing the Adjustment of the Cheekrest - Can be Added to Either Side of the Stock - Limited Lifetime Warranty - Manufactured in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Side Saddle & Add-a-Shell, Side-Saddle, Side-Saddle, Side-Saddle & Shell Holders **Product ATI Colors:** Black --- ### [Forend Pistol Grip, FPG](https://www.atioutdoors.com/product/forend-pistol-grip-3/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Compatibility** - Fits Standard Picatinny Rail ## **Product Highlights** - Three-Position Forend Pistol Grip - Ergonomic Design - Textured Grip - Gives You Extra Support & Stability When Shooting - Installs Onto a Standard Picatinny Rail (Not Included) - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Grips, Grips, Grips, Parts **Product ATI Colors:** Black --- ### [Strikeforce GEN2 Stock fits Mini-14®/Mini-Thirty®](https://www.atioutdoors.com/product/strikeforce-mini-14-thirty-stock-2/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - TactLite GEN2 Six-Position Adjustable Stock - Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TracLOCK GEN2 System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - X Series Thin Recoil Pad - Non-Slip, Removable - X1 Style Pistol Grip - Sure-Grip Texture - Recoil Impact is Absorbed - Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals or Extreme Temperatures - Four Forward Picatinny Rail Locations - One 7″ Picatinny Top Rail - Two 2″ Pictinny Rails - One 2″ Swivel Stud Picatinny Rail - Blank Covers for When Rails are Not in Use - Additional Ventilation in Forend and Top Cover - Slot for Tactical Sling Attachment - Two Sling Swivel Studs - Mounting Hardware Included - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Ruger Mini-14®/Mini-Thirty® Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [Shotforce Pistol Grip Stock, PGS](https://www.atioutdoors.com/product/shotforce-pgs/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Shotforce Shotgun Pistol Grip Stock w/X Series Recoil Reducing Butt-Pad **Content:** ## **Product Highlights** - Shotforce Pistol Grip Shotgun Stock - Slim Ergonomic Design - Length of Pull: 14″ - Non-Slip Pistol Grip Texture - Increased Control & Accuracy - X Series Reducing Butt-Pad - Recoil Impact is Absorbed - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Shoot Any Load Size with No Pain Transfer to the Shooter - Not Affected by Chemicals or Extreme Temperatures - Reduces Fatigue When Shooting Slugs and Turkey Loads - Easy Installation - Includes Adapters for All Supported Models - Uses Factory Stock Bolt - Swivel Stud Sling Attachment - Scratch proof & Weatherproof - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA Mount Patent # 6,374,528 B1 **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Stocks **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Strikeforce GEN2 Stock fits Ruger® 10/22®](https://www.atioutdoors.com/product/strikeforce-10-22-stock/) **Published:** May 3, 2019 **Author:** John Chvala **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - TactLite GEN2 Six-Position Adjustable Stock - Side-Folds to the Left of the Receiver - Can be Fired from Folded Position - TracLOCK GEN2 System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - No Snag Points - Dual Sided QD Attachment Point - Removable/Adjustable Cheekrest System - Elongated Design to Fit All Users - Includes Short Cheekrest with ½” of Adjustment - X Series Thin Recoil Pad - Non-Slip, Removable - X1 Style Pistol Grip - Sure-Grip Texture - Recoil Impact is Absorbed - Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift - Not Affected by Chemicals or Extreme Temperatures - Three Forward Picatinny Rail Locations - One 4” Picatinny Rail Blank Covers for When Rails are Not in Use - Three 2” Picatinny Rails - One 2″ Swivel Stud Picatinny Rail - Blank Covers for When Rails are Not in Use - Additional Ventilation in Forend and Top Cover - Slots and QD Mounts for Tactical Sling Attachment - Two Sling Swivel Studs - Mounting Hardware Included - Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [X1 AR-15 / AR-10 Grip](https://www.atioutdoors.com/product/x1-pistol-grip/) **Published:** December 30, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights The ATI X1 Recoil Reducing Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift. - X1 Recoil Reducing Pistol Grip - Ergonomic Design - Great for Shooters of All Hand Sizes - Sure-Grip Texture for Increased Control - Built-In X Series Recoil Absorbing Backstrap - Reduces Muzzle Lift - Eliminates the Felt Punch of the Recoil - Not Affected by Chemicals or Extreme Temperatures - Easy Installation - Uses Original Mounting Hardware - Scratchproof & Weatherproof - DuPont® Extreme Temperature Glass Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Grips, Grips, Parts **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth) --- ### [Classic Heatshield with Sights](https://www.atioutdoors.com/product/classic-deluxe-heatshield-with-sights/) **Published:** December 2, 2011 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - Steel Formed Shotgun Heatshield - Elongated Cooling Slots for Maximum Dissipation of Heat - Easy Installation – Simply Slide Over Barrel and Secure With Supplied Hardware - AR-15 Style Fixed Nylon Ghost Ring Sights - 13-1/2″ Long - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Accessories & Parts, Heat Shields --- ### [Strikeforce Shotgun Forend](https://www.atioutdoors.com/product/strikeforce-shotgun-forend-black/) **Published:** April 2, 2025 **Author:** bDAaDnXN6j **Excerpt:** Strikeforce Shotgun Forend in Black **Content:** ## **Product Highlights** - Tactical Shotgun Picatinny Rail Package - One Left 2″ Picatinny Rail - One Right 2″ Picatinny Rail - Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories - Blank Inserts for When Rails are Not in Use - Textured Forend - Very Tough, yet Extremely Lightweight - Extreme Temperature Glass Reinforced Polymer - Manufactured in the USA - Limited Lifetime Warranty **Product brands:** ATI Outdoors **Product categories:** Accessories & Parts, Accessories & Parts, Accessories & Parts, Forends, Forends, Forends, Forends, Forends **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [AR-22 GEN2, fits Ruger® 10/22®](https://www.atioutdoors.com/product/ar-22-10-22-kit/) **Published:** January 20, 2015 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## **Product Highlights** - AR-22 GEN2 Stock system - AR-15 Style Polymer Receiver Chassis - Receiver Shroud is Comprised of Two Polymer Halves - Includes All Intricate Features of the AR-15 - Components Mount to the Receiver for Added Support - Invisible Parting Lines - Accepts any 10-25 Round Magazine - 6-Sided Tactlite GEN2 Synthetic Forend - Customize with the ability to mount ATI picatinny rails anywhere on the Forend - 21″ Aluminum Picatinny Top Rail for Optics and Accessories - Military Grade Synthetic Handguard Nose Cone - Note: The barrel of the 10/22 will exit the nose cone at the 12 o’clock position & sit top-center, not directly in the middle - TactLite GEN2 Six-Position Adjustable Stock - No Snag Points - Dual Sided QD Attachment Point - TracLock GEN2 System - Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube - Provides Smooth Secure Stock Adjustments - Eliminates the Need for Secondary Locking Mechanisms - X Series Thin Recoil Pad - Non-Slip, Removable - X2 Style Pistol Grip - X Series Recoil Backstrap - Sure-Grip Texture - Ergonomic Design Fits All Hands - Limited Lifetime Warranty - Made in the USA *Grip Patent # 8,561,338 82, Forend Patent # 8,215,046, Patent Pending Stock System* **Product brands:** ATI Outdoors **Product categories:** Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [T3 GEN2 Shotgun Stock](https://www.atioutdoors.com/product/t3-stock/) **Published:** June 4, 2019 **Author:** bDAaDnXN6j **Excerpt:** Made in the USA **Content:** ## Product Highlights ### T3 GEN2 Pistol Grip Shotgun Stock - Compact design for transport and carry - Adjustable length of pull from **13 1/8″ to 16 5/8″** ### TactLite GEN2 6-Position Adjustable Mil-Spec Stock - TracLOCK GEN2 system provides smooth, secure stock adjustments - Eliminates horizontal and vertical movement of the stock on the buffer tube - Eliminates the need for secondary locking mechanisms - No snag points ### X Series Recoil-Reducing Pistol Grip - Built-in X Series recoil-absorbing backstrap - Slim ergonomic design - Sure-Grip texture for increased control ### X2 Recoil-Reducing Butt-Pad - Upgraded 1 1/4″ thick pad - Absorbs recoil impact - Reduces muzzle lift - Eliminates the felt punch of recoil - Shoot any load size with no pain transfer to the shooter - Not affected by chemicals or extreme temperatures ### Comfort & Sling Features - Dual-sided QD sling attachment points - Dual slots for tactical sling attachment - Adjustable and removable cheekrest - Elongated design to fit all users - Cheekrest provides 1/2″ of vertical adjustment ### Easy Installation - Universal mount system - Securely fastens with no specialized tools required - Mounts included for all supported models in one package - All mounting hardware included ### Durable Construction - Scratch Proof and weatherproof - DuPont® Extreme Reinforced Polymer - Limited Lifetime Warranty - Made in the USA **Product brands:** ATI Outdoors **Product categories:** 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12 GA Stocks, 12ga Stocks, 20 GA Stocks, 20 GA Stocks, 20 GA Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks, Stocks **Product ATI Colors:** Black, Destroyer Gray, FDE (Flat Dark Earth), Urban Combat --- ### [.50 Cal Rifle, 1/3 Scale Replica](https://www.atioutdoors.com/product/50-cal-rifle-1-3-scale-replica/) **Published:** August 7, 2020 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## .50 Cal Rifle, 1/3 Scale Replica - **Features** - All metal construction - Functioning features: - Charge handle Pulls back - Flip up iron sights - Optional Scope, included - Spring loaded trigger - BiPod - Adjustable Sites - Removable magazine with 3 brass rounds to load - Mag release button - .50 Cal Mini is 13.75″ long and weighs 1 lbs. This is a 1/3 scale model toy. - RW Minis are non-firing 1/3 scale toy models that cannot be altered to shoot - 30 Day Warranty - WARNING CHOKING HAZARD. Not For Children Under 12. **Product brands:** ATI Outdoors **Product categories:** Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Rubber Band Gun, Blue](https://www.atioutdoors.com/product/rubber-band-gun-blue/) **Published:** November 9, 2021 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## **Pocket Size** Rubber Band Gun - **Features** - All metal construction - Adjustable for concealed carrying - Key Chain Loop - Load up to 7 rubber bands at a time - Semi-auto fire - Bag of rubber bands included - Size Closed: 1.50″ x 2.79″ Open : 1.50″ x 2.70″ 8oz - 30 Day Warranty - Note: This is toy model - WARNING CHOKING HAZARD. Not For Children Under 12. **Product brands:** ATI Outdoors **Product categories:** Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Rubber Band Gun, Red](https://www.atioutdoors.com/product/rubber-band-gun-red/) **Published:** November 9, 2021 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## **Pocket Size** Rubber Band Gun - ### **Features** - All metal construction - Adjustable for concealed carrying - Key Chain Loop - Load up to 7 rubber bands at a time - Semi-auto fire - Bag of rubber bands included - Size Closed: 1.50″ x 2.79″ Open : 1.50″ x 2.70″ 8oz - 30 Day Warranty - Note: This is toy model - WARNING CHOKING HAZARD. Not For Children Under 12. **Product brands:** ATI Outdoors **Product categories:** Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Drab Green Tactical Vest Drink Cooler](https://www.atioutdoors.com/product/drab-green-tactical-vest-drink-cooler/) **Published:** August 7, 2020 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## Drab Green Tactical Vest Drink Cooler - **Features** - Hand Stitched Drink Cooler - Handles all sizes from, 12oz cans, 12-16 oz bottles and 12 oz water bottles and more - Velcro adjustable sides and shoulders straps handle a multitude of beverage sizes - Contoured to fit your hand - Patent Pending bottom strap so your beverage stays in place - Customize by adding your own velcro patches - Size: 5.50″ x 4.00″ - 30 Day Warranty **Product brands:** ATI Outdoors **Product categories:** Parts, Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [.44 Magnum Bullet Knife](https://www.atioutdoors.com/product/44-magnum-bullet-knife/) **Published:** November 17, 2021 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## .44 Magnum Bullet Knife #### Features - .75″ long when closed - 2.75″ Long when opened - Stainless Steel blade - Positive Blade Locking Action - Convenient Keychain Included - Very Sharp edge - 30 Day Warranty - WARNING: Not For Children - WARNING CHOKING HAZARD. Not For Children Under 12. **Product brands:** ATI Outdoors **Product categories:** Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Grey Tactical Vest Drink Cooler](https://www.atioutdoors.com/product/grey-tactical-vest-drink-cooler/) **Published:** January 9, 2022 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## Grey Tactical Vest Drink Cooler - **Features** - Hand Stitched Drink Cooler - Handles all sizes from, 12oz cans, 12-16 oz bottles and 12 oz water bottles and more - Velcro adjustable sides and shoulders straps handle a multitude of beverage sizes - Contoured to fit your hand - Patent Pending bottom strap so your beverage stays in place - Customize by adding your own velcro patches - Size: 5.50″ x 4.00″ - 30 Day Warranty **Product brands:** ATI Outdoors **Product categories:** Parts, Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [FDE Tan Tactical Vest Drink Cooler](https://www.atioutdoors.com/product/fde-tan-tactical-vest-koozie/) **Published:** August 7, 2023 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## FDE Tan Tactical Vest Drink Cooler - **Features** - Hand Stitched Drink Cooler - Handles all sizes from, 12oz cans, 12-16 oz bottles and 12 oz water bottles and more - Velcro adjustable sides and shoulders straps handle a multitude of beverage sizes - Contoured to fit your hand - Patent Pending bottom strap so your beverage stays in place - Customize by adding your own velcro patches - Size: 5.50″ x 4.00″ - 30 Day Warranty **Product brands:** ATI Outdoors **Product categories:** Parts, Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ### [Blaze Orange Hunting Vest Drink Cooler](https://www.atioutdoors.com/product/blaze-orange-hunting-vest-koozie/) **Published:** August 7, 2023 **Author:** John Chvala **Excerpt:** RW Minis **Content:** ## Blaze Orange Hunting Vest Drink Cooler - **Features** - Hand Stitched Drink Cooler - Handles all sizes from, 12oz cans, 12-16 oz bottles and 12 oz water bottles and more - Velcro adjustable sides and shoulders straps handle a multitude of beverage sizes - Contoured to fit your hand - Patent Pending bottom strap so your beverage stays in place - Customize by adding your own velcro patches - Size: 5.50″ x 4.00″ - 30 Day Warranty **Product brands:** ATI Outdoors **Product categories:** Parts, Sale **Product iGlobal Dimension Units:** in **Product iGlobal Weight Units:** lbs --- ## HTML Block Categories ### [Uncategorized](https://www.atioutdoors.com/cms_block_cat/uncategorized/) --- ## Popup Categories ### [PopUp](https://www.atioutdoors.com/wd_popup_cat/popup/) --- ## Product brands ### [ATI Outdoors](https://www.atioutdoors.com/brand/ati-outdoors/) --- ## Product categories ### [New](https://www.atioutdoors.com/product-category/new-products/) **Description:** ATI Outdoors Selection of Stocks, Grips, Slings, Q.D. Mounts, Cleaning Kits, Targets, and Accessories. --- ### [Shotguns](https://www.atioutdoors.com/product-category/shotguns/) **Description:** Advanced Technology International's Shotgun Stock, Forend, Heatshield, Shell Carrier, Side Saddle, Recoil Pad, Rails, Sling, and Accessory Selection. --- ### [Handguns](https://www.atioutdoors.com/product-category/handguns/) **Description:** Advanced Technology International's Handgun Grips and Accessories, Featuring ATI's Scorpion Recoil System. --- ### [Accessories](https://www.atioutdoors.com/product-category/accessories/) **Description:** Advanced Technology International's Selection off Slings, Heat Shields, Shell Holders, Cleaning Kits & Targets. --- ### [Sale](https://www.atioutdoors.com/product-category/sale/) **Description:** Advanced Technology International's Sale, Discount, or Clearance Stocks, Grips, and Accessories for Handguns, Rifles, and Shotguns. --- ### [AR-15](https://www.atioutdoors.com/product-category/rifles/ar-15/) **Description:** ATI Outdoors' AR-15 Stock, Forend, Handgaurd, Rail. Grip, Sling, and Accessory Selection. --- ### [Taurus](https://www.atioutdoors.com/product-category/handguns/taurus/) **Description:** Advanced Technology International's Taurus Revolver Grips and Accessories, Featuring ATI's Scorpion Recoil System. --- ### [Heat Shields](https://www.atioutdoors.com/product-category/accessories/heat-shields/) **Description:** Advanced Technology International's Selection of .410/20/16/12 Ga. Shotgun Heat Shields by ATI --- ### [AR-10](https://www.atioutdoors.com/product-category/rifles/ar-10/) **Description:** ATI Outdoors' AR-10 Stock, Forend, Handgaurd, Rail. Grip, Sling, and Accessory Selection. --- ### [AK-47](https://www.atioutdoors.com/product-category/rifles/ak-47/) **Description:** Advanced Technology International's AK-47 Stock, Handgaurd, Rail. Grip, Sling, and Accessory Selection. --- ### [Side-Saddle & Shell Holders](https://www.atioutdoors.com/product-category/accessories/side-saddle-shell-holders/) **Description:** Advanced Technology International's Selection of Shotgun/Rifle/Universal Shell Holders by ATI --- ### [CZ](https://www.atioutdoors.com/product-category/rifles/czusa/) **Description:** Advanced Technology International's CZ USA 512 Rifle Stock and Accessory Selection. --- ### [Slings, Mounts & Adapters](https://www.atioutdoors.com/product-category/accessories/slings-mounts-adapters/) **Description:** ATI Outdoors Selection of Slings, Mounts & Adapters by ATIoutdoors and GrovTec --- ### [Enfield](https://www.atioutdoors.com/product-category/rifles/enfield/) **Description:** Advanced Technology International's Enfield Stock, Mount, Sling, and Accessory Selection. --- ### [FNH USA P-12](https://www.atioutdoors.com/product-category/shotguns/fnh-usa/) **Description:** Advanced Technology International's FNH USA P-12 Stocks, Sling, Recoil Pad, Shell Holder and Accessory Selection. --- ### [Hi-Point](https://www.atioutdoors.com/product-category/rifles/hi-point/) **Description:** Advanced Technology International's 9mm Hi-Point Carbine Stock and Accessory Selection from ATIoutdoors.com --- ### [Mossberg Shockwave](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-12ga-shockwave/) **Description:** ATI Outdoors Mossberg 12ga Shockwave Quad Rail and Side Shell Holder --- ### [Maverick 88](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/) **Description:** Advanced Technology International's Maverick 88 12 Gauge Stocks, Sling, Recoil Pad, Shell Holder and Accessory Selection. --- ### [H&R/NEF](https://www.atioutdoors.com/product-category/rifles/h-r-nef/) **Description:** Advanced Technology International's Harrison and Richardson H&R/NEF Stock, Heatshield, Sling, and Accessory Selection. --- ### [Mossberg 500/590/835](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/) **Description:** ATI Outdoors Mossberg 12 Gauge Stock, Forends, Side Saddle, Heat Shield, Recoil Pad, Sling and Accessory Selection. --- ### [Marlin](https://www.atioutdoors.com/product-category/rifles/marlin/) **Description:** Advanced Technology International's Marlin Stock and Accessory Selection. --- ### [Rossi](https://www.atioutdoors.com/product-category/shotguns/rossi/) --- ### [Mauser 98](https://www.atioutdoors.com/product-category/rifles/mauser/) **Description:** Advanced Technology International's Mauser 98 Stock, Mount, Sling, and Accessory Selection. --- ### [Saiga](https://www.atioutdoors.com/product-category/shotguns/saiga/) **Description:** Advanced Technology International's Saiga Shotgun Stocks, Sling, Recoil Pad, Shell Holder, Rear Pistol Grip, and Accessory Selection. --- ### [Savage / Stevens 320](https://www.atioutdoors.com/product-category/shotguns/savage-and-stevens/) **Description:** Advanced Technology International's Savage and Stevens 320 12-Gauge Stocks, Grips, Slings, Mounts, and Accessories. --- ### [Mosin Nagant](https://www.atioutdoors.com/product-category/rifles/mosin-nagant/) **Description:** Advanced Technology International's Mosin Nagant Stock, Mount, Sling, and Accessory Selection. --- ### [Winchester](https://www.atioutdoors.com/product-category/shotguns/winchester/) **Description:** Advanced Technology International's Selection of Winchester SXP/1200/1300 Stocks, Tactical Packages, Forends, Picatinny Rails, Accessories, and Parts by ATI. --- ### [Remington 7600](https://www.atioutdoors.com/product-category/rifles/remington-7600/) **Description:** Advanced Technology International's Remington 7600 Rifle Stock, Sling, and Accessory Selection. --- ### [Rossi](https://www.atioutdoors.com/product-category/rifles/rossi-1/) **Description:** Advanced Technology International's Rossi Shotgun Stocks, Forend, Shell Holder and Accessory Selection. --- ### [Saiga](https://www.atioutdoors.com/product-category/rifles/saiga-1/) **Description:** Advanced Technology International's Saiga Rifle Stocks, Sling, Recoil Pad, Shell Holder, Rear Pistol Grip, and Accessory Selection. --- ### [SKS](https://www.atioutdoors.com/product-category/rifles/sks/) **Description:** Advanced Technology International's SKS Stock and Accessory Selection. --- ### [12 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/mossberg-12-gauge/) **Description:** Advanced Technology International's Mossberg 500, 535, 590, 835, 12 Gauge Aluminum Adjustable Stock Selection, Hunting and Sporting, Rear Pistol Grip --- ### [Ruger® 10/22®](https://www.atioutdoors.com/product-category/rifles/ruger/10-22/) **Description:** Advanced Technology International's Ruger 10/22 Stock, Forend, Rail, Sling, and Accessory Selection. --- ### [Winchester SXP](https://www.atioutdoors.com/product-category/shotguns/winchester/sxp/) **Description:** Advanced Technology International's Selection of Winchester SXP Stocks, Tactical Packages, Forends, Picatinny Rails, Accessories, and Parts by ATI. --- ### [TriStar Raptor](https://www.atioutdoors.com/product-category/shotguns/tristar/raptor/) **Description:** Advanced Technology International's TriStar Raptor Stock, Forend, Magazine Extension, and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/remington-7600/stocks/) **Description:** Advanced Technology International's Remington 7600/760/7400/740 Pistol Grip and Adjustable Stock Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/hi-point/stocks-1/) **Description:** Advanced Technology International's Hi-Point Stock Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-10/accessories-and-parts/) **Description:** ATI Outdoors' AR-15 Part and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/ak-47/stocks-1-ak-47/) **Description:** Advanced Technology International's AK-47 Adjustable Stock Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/enfield/stocks-1-enfield/) **Description:** Advanced Technology International's Enfield No. 4 Mk 1, 2 & 5 & No. 1 Mk 3 Monte Carlo Stock Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/h-r-nef/stocks-1-h-r-nef/) **Description:** Advanced Technology International's H&R/NEF Adjustable Stock Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/marlin/stocks-1-marlin/) **Description:** Advanced Technology International's Marlin Fiberforce Dragunov Style Stock Selection. --- ### [12 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/maverick-88-12-gauge/) **Description:** ATI Outdoors Maverick 88 12 Gauge Adjustable Stocks --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/mosin-nagant/stocks-1-mosin-nagant/) **Description:** Advanced Technology International's Mosin Nagant Monte Carlo Stock Selection. --- ### [870](https://www.atioutdoors.com/product-category/shotguns/remington/870/) **Description:** Advanced Technology International's Remington 870 Shotgun Stock, Tactical Package, Forend, and Accessory Selection. --- ### [Ruger® Mini-14®/Mini-Thirty®](https://www.atioutdoors.com/product-category/rifles/ruger/mini-14-thirty/) **Description:** Advanced Technology International's Ruger Mini-14 & Mini-Thirty Stock, Forend, Rail, Sling, and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/sks/stocks-1-sks/) **Description:** Advanced Technology International's SKS Adjustable Stock Selection | Strikeforce | Monte Carlo | Fiberforce| by ATIoutdoors.com --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/saiga/stocks-1-saiga/) **Description:** Advanced Technology International's Saiga 12 Gauge Aluminum Adjustable Sporting Stock Selection. Dragunov Style Fiberforce Stock. --- ### [1200/1300](https://www.atioutdoors.com/product-category/shotguns/winchester/1200-1300/) **Description:** Advanced Technology International's Winchester 1200/1300 Stocks, Sling, Recoil Pad, Shell Holder and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/savage-and-stevens/stocks-1-savage-and-stevens/) **Description:** Advanced Technology International's Savage and Stevens 320 12-Gauge Adjustable Stocks and Rear Pistol Grips. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/saiga-1/stocks-1-saiga-1/) **Description:** Advanced Technology International's Saiga Rifle Aluminum Adjustable Sporting Stock Selection. Dragunov Style Fiberforce Stock. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/czusa/stocks-1-czusa/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/fnh-usa/stocks-1-fnh-usa/) **Description:** Advanced Technology International's FN P-12 12 Gauge Adjustable Stocks --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/remington-7600/accessories-and-parts-1/) **Description:** Advanced Technology International's Remington 7600 Part, and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/hi-point/accessories-and-parts-1-hi-point/) **Description:** Advanced Technology International's Hi-Point Part and Accessory Selection. --- ### [20 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/20-gauge-stocks/) **Description:** Mossberg 20 Gauge Accessories from ATI Outdoors | ATIOutdoors.com --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/ar-10/stocks-1-ar-10/) **Description:** ATI Outdoors' AR-10 Adjustable Stock Selection --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/ar-15/stocks-1-ar-15/) **Description:** ATI Outdoors' AR-15 Adjustable Stock Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/enfield/accessories-and-parts-1-enfield/) **Description:** Advanced Technology International's Enfield No. 4 Mk 1, 2 & 5 & No. 1 Mk 3 Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/h-r-nef/accessories-and-parts-1-h-r-nef/) **Description:** Advanced Technology International's H&R/NEF Heatshield, Sling, Part, and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/marlin/accessories-and-parts-1-marlin/) **Description:** Advanced Technology International's Marlin Sling, Part, and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/mauser/stocks-1-mauser/) **Description:** Advanced Technology International's Mauser 98 Monte Carlo Stock Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/mosin-nagant/accessories-and-parts-1-mosin-nagant/) **Description:** Shop Advanced Technology International's Mosin Nagant Mount, Part, and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/rossi-1/accessories-and-parts-1-rossi-1/) **Description:** Advanced Technology International's Rossi Sling, Shell Holder, Recoil Pad, and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/sks/accessories-and-parts-1-sks/) **Description:** Advanced Technology International's SKS Sling, Part, and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/saiga/accessories-parts-1/) **Description:** Advanced Technology International's Saiga 12 Gauge Shotgun Sling, Recoil Pad, Shell Holder, Rear Pistol Grip, and Accessory Selection. --- ### [Remington 887](https://www.atioutdoors.com/product-category/shotguns/remington/887/) **Description:** Advanced Technology International's Remington 887 Shotgun Stock and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/savage-and-stevens/accessories-1/) **Description:** Advanced Technology International's Savage and Stevens 320 12-Gauge Slings, Mounts, Shell Holders, Accessories & Parts --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/saiga-1/accessories-1-saiga-1/) **Description:** Advanced Technology International's Saiga Rifle Sling, Recoil Pad, Shell Holder, Rear Pistol Grip, and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/rossi/accessories-1-rossi/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/czusa/accessories-1-czusa/) **Description:** Advanced Technology International's CZ 512 Parts and Accessory Selection. --- ### [Grips](https://www.atioutdoors.com/product-category/rifles/ak-47/grips/) **Description:** Advanced Technology International's AK-47 Scorpion Recoil Pistol Grip Selection. --- ### [20 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/20-gauge-stocks-1/) **Description:** ATI Outdoors Maverick 88 20 Gauge stocks from ATI Outdoors | ATIOutdoors.com --- ### [Grips](https://www.atioutdoors.com/product-category/rifles/ar-10/grips-1/) **Description:** ATI Outdoors' AR-10 X1 X2 Scorpion Recoil Pistol Grip Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ak-47/accessories-and-parts-1-ak-47/) **Description:** Advanced Technology International's AK-47 Part and Accessory Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/mauser/accessories-and-parts-1-mauser/) **Description:** Advanced Technology International's Mauser 98 Mount, Part, and Accessory Selection. --- ### [1100/11-87](https://www.atioutdoors.com/product-category/shotguns/remington/1100-11-87/) **Description:** Advanced Technology International's Remington 100/11-87 Shotgun Stock and Accessory Selection. --- ### [Grips](https://www.atioutdoors.com/product-category/rifles/ar-15/grips-1-ar-15/) **Description:** ATI Outdoors' AR-15 X1 X2 Scorpion Recoil Pistol Grip Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/fnh-usa/accessories-parts-1-fnh-usa/) **Description:** ATI Outdoors FNH P-12 12 Gauge Slings, Shell Holders Carriers, Accessories, & Parts --- ### [Forend Accessories](https://www.atioutdoors.com/product-category/rifles/ar-15/forend-accessories/) **Description:** ATI Outdoors AR-15 Forend, Handgaurd, and Rail Selection. --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/accessories-and-parts-1-maverick/) **Description:** Advanced Technology International's Maverick 88 12 Gauge Slings, Shell Holders Carriers, Accessories, and Parts --- ### [Side-Saddle](https://www.atioutdoors.com/product-category/shotguns/mossberg/maverick/side-saddle/) **Description:** Mossberg 500 & 590 & Maverick 88 Side-Saddle from Advanced Technology International | ATIoutdoors.com --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ar-15/accessories-and-parts-1-ar-15/) **Description:** ATI Outdoors' AR-15 Part and Accessory Selection. --- ### [Forends](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/forends-and-picatinny-rails/) **Description:** Mossberg 500/535/590/835 Forends from Advanced Technology International | ATIGunStocks.com --- ### [Side-Saddle](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/side-saddle-1/) **Description:** Mossberg 500 & 590 & Maverick 88 Side-Saddle from Advanced Technology International | ATIoutdoors.com --- ### [Picatinny Rails](https://www.atioutdoors.com/product-category/rifles/ar-15/picatinny-rails/) **Description:** ATI Outdoors Picatinny Rails --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-500-590-835/accessories-and-parts-1-mossberg/) **Description:** Mossberg 500/535/590/835 Accessories from Advanced Technology International | ATIoutdoors.com --- ### [12 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/remington/870/remington-870-12-gauge/) --- ### [Ruger Mini-14®/Mini-Thirty® Stocks](https://www.atioutdoors.com/product-category/rifles/ruger/mini-14-thirty/stocks-1-mini-14-thirty/) --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/ruger/10-22/stocks-1-10-22/) --- ### [12 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/winchester/1200-1300/winchester-1200-1300-12-gauge/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/tristar/raptor/stocks-1-raptor/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/winchester/sxp/stocks-1-sxp/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/remington/887/stocks-1-887/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ruger/mini-14-thirty/accessories-and-parts-1-mini-14-thirty/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/1100-11-87/accessories-1-1100-11-87/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/tristar/raptor/accessories-parts-1-raptor/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/887/accessories-1-887/) --- ### [20 GA Stocks](https://www.atioutdoors.com/product-category/shotguns/winchester/1200-1300/winchester-1200-1300-20-gauge-stocks/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/winchester/1200-1300/accessories-parts-1-1200-1300/) --- ### [Forends](https://www.atioutdoors.com/product-category/shotguns/winchester/sxp/forends-picatinny-rails/) --- ### [Forends](https://www.atioutdoors.com/product-category/shotguns/remington/870/forends-and-picatinny-rails-1/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/rifles/ruger/10-22/accessories-and-parts-1-10-22/) --- ### [Forends](https://www.atioutdoors.com/product-category/shotguns/winchester/1200-1300/forends-picatinny-rails-1/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/winchester/sxp/accessories-parts-1-sxp/) --- ### [Side Saddle & Add-a-Shell](https://www.atioutdoors.com/product-category/shotguns/remington/870/side-saddle-add-a-shell/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/remington/870/accessories-and-parts-1-870/) --- ### [Parts](https://www.atioutdoors.com/product-category/accessories/parts/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-12ga-shockwave/stocks-mossberg-12ga-shockwave/) **Description:** Mossberg 12ga Shockwave Stock & Accessories --- ### [Mossberg 590R/590RM](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-590r-590rm/) **Description:** ATI Outdoors Mossberg 12 Gauge Stock, Forends, Side Saddle, Heat Shield, Recoil Pad, Sling and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-590r-590rm/mossberg-590r-590rm-stocks/) --- ### [Mossberg 990 Aftershock](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-990-aftershock/) **Description:** ATI Outdoors Mossberg 12 Gauge Stock, Forends, Side Saddle, Heat Shield, Recoil Pad, Sling and Accessory Selection. --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-990-aftershock/mossberg-990-aftershock-stocks/) --- ### [Rifles](https://www.atioutdoors.com/product-category/rifles/) --- ### [Mossberg / Maverick](https://www.atioutdoors.com/product-category/shotguns/mossberg/) --- ### [H&R/NEF](https://www.atioutdoors.com/product-category/shotguns/hr-nef/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/hr-nef/stocks-hr-nef/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/hr-nef/accessories-parts/) --- ### [Charles Daly](https://www.atioutdoors.com/product-category/shotguns/charles-daly/) --- ### [CZ](https://www.atioutdoors.com/product-category/shotguns/cz-usa-712/) --- ### [Stoeger](https://www.atioutdoors.com/product-category/shotguns/stoeger/) --- ### [Weatherby](https://www.atioutdoors.com/product-category/shotguns/weatherby/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/cz-usa-712/stocks-cz-usa-712/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/cz-usa-712/accessories-cz-usa-712/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/charles-daly/accessories-charles-daly/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/charles-daly/stocks-charles-daly/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/weatherby/stocks-weatherby/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/weatherby/accessories-weatherby/) --- ### [Stocks](https://www.atioutdoors.com/product-category/shotguns/stoeger/stocks-stoeger/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/stoeger/accessories-stoeger/) --- ### [Stocks](https://www.atioutdoors.com/product-category/rifles/rossi-1/stocks-r/) --- ### [stocks](https://www.atioutdoors.com/product-category/shotguns/rossi/stocks-s/) --- ### [12ga Stocks](https://www.atioutdoors.com/product-category/shotguns/palmetto-state-armory-psa/palmetto-state-armory-570/psa-12ga-stocks/) --- ### [Forends](https://www.atioutdoors.com/product-category/shotguns/palmetto-state-armory-psa/palmetto-state-armory-570/psa-forends/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/palmetto-state-armory-psa/palmetto-state-armory-570/psa-accessories/) --- ### [Palmetto State Armory 570](https://www.atioutdoors.com/product-category/shotguns/palmetto-state-armory-psa/palmetto-state-armory-570/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-12ga-shockwave/accessories-parts-mossberg-12ga-shockwave/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-990-aftershock/accessories-parts-mossberg-990-aftershock/) --- ### [Accessories & Parts](https://www.atioutdoors.com/product-category/shotguns/mossberg/mossberg-590r-590rm/accessories-parts-mossberg-590r-590rm/) ---