Fits: Any ATI Shotforce Top Folding or Full Length Wood or Synthetic Stocks
*Will not fit ATI TactLite Stocks
- Shotforce Stock Shell Holder
- Holds Five Rounds
- Quick & Easy Access to Extra 12 Ga Rounds
- DuPont® Extreme Reinforced Polymer
- Limited Lifetime Warranty
- Made in the USA
Fits well...Rated 4 out of 5 27
by Jeffrey F. (verified owner)
Needed this to compliment the folding stock on my Maverick 88. It was easy to install but seems a little flimsy. Only time will tell if this holds up.
(0) (0)
Great productsRated 5 out of 5 27
by alex w. (verified owner)
Great add on
(0) (0)
AwesomeRated 5 out of 5 27
by Michael B.
Just like in Jurassic Park.
(0) (0)
Works great on Synthetic StockRated 5 out of 5 27
by Lcg
I mounted this to my Mossberg Maverick HS12. I read the reviews here and on Amazon and agree that the template holes are not spot on. Just make sure you check before doing anything. I also went ahead like others and bought a bolt and nut set to use instead of the provided screws. Using them resulted with a very snug and secure fit. Lastly, I used a little purple loctite to make sure they do not back themselves out.
As for function, it does the job well. Shotshells are held firmly but removal is not too hard albeit a touch slow. For me it is just a good way to carry extra ammo at the range or in the field.
(0) (0)
Excellent buying experienceRated 5 out of 5 27
by Troy M.
Product was exactly as described online. Ordering process very easy and efficient; product arrived on or before the stated time; installed just as expected. All went very well.
(0) (0)
PerfectRated 5 out of 5 27
by Seth
Perfect fit and holds shells beautifully.
(0) (0)
Shell HolderRated 5 out of 5 27
by Bruce V.
Perfect fit for my folding stock. Well built for years of use.
(0) (0)
resent purchaseRated 5 out of 5 27
by Ronald P.
great prices well stocked inventory and great service will be back again
(0) (0)
Folding stock and shell holderRated 5 out of 5 27
by Mark T.
I installed the folding stock on a Remington 870. It looks and functions perfectly. It adds very little weight and is extremely strong.
(0) (0)
Flexible, durableRated 5 out of 5 27
by Guest
I’m surprised how flexible the shell holder is, but in a good way. It’s made of tough rubber-type compound that flexes enough to tightly fit different shells but not fatigue by doing so. I haven’t had it long (and installation was a breeze) but can tell that it will last through plenty of use and weather. Lightweight and tough but plenty flexible so you it will hold strong without feeling like you’re fighting to get shells in or out.
(0) (0)
Shell HolderRated 5 out of 5 27
by George B.
Purchased this aux. shell holder to compliment the folding stock I also purchased for my 870 clone. The fit and finish were perfect, it looks good and I couldn’t be happier. I would recommend this accessory to everyone.
(0) (0)
Shell HolderRated 5 out of 5 27
by Guest
Perfect fit works great
(0) (0)
Missing a screw on delivery.Rated 3 out of 5 27
by Guest
Was corrected. Mailed me the missing screw.
(0) (0)
The shell holder fit greatRated 5 out of 5 27
by Joe P.
The shell holder fit great on my Winchester Defender. A perfect addition to my folding stock…Great product.
(0) (0)
Great productRated 4 out of 5 27
by Nicholas F.
Was easy to install on my ATI fold over stock on my Mossberg. It holds the shells pretty tight so they won’t fall out but almost to tight that they are hard to remove. I’m hoping they loosen over time. As a side note the added height of the shell holder and fold over the top stock makes the shotgun to tall for a standard soft case.
(0) (0)
nice shell holder, very lightRated 5 out of 5 27
by Jingliang S.
nice shell holder, very light weighted , fit my ATI foldable stock precisely. One thing need to noted is the screws need to be put to the lowest end so that they won’t scratch the shells.
(0) (0)
good product!Rated 5 out of 5 27
by Dbean73
Would buy again!
(0) (0)
Good stuffRated 5 out of 5 27
by Chris B.
Good stuff
(0) (0)
Very nice. Will buy againRated 5 out of 5 27
by Miguel M.
Very nice. Will buy again
(0) (0)
I ordered the shot shellRated 5 out of 5 27
by Charles E.
I ordered the shot shell holder, top folding stock and sling. The order and shipping was quick and painless. The products and fit are great and I am very satisfied. Would recommend to anyone and will buy from this company again.
(0) (0)
Good valueRated 5 out of 5 27
by Paul M.
Good value
(0) (0)
I installed this on aRated 5 out of 5 27
by Gordy G.
I installed this on a Stevens 320 security and it is a perfect fit. Easy to install and looks good.
(0) (0)
Works great! I have itRated 5 out of 5 27
by Isaac K.
Works great! I have it on the folding stock of my shotgun, as was my first one. Very convenient.
(0) (0)
excellentRated 5 out of 5 27
by Angry F.
worked great with top folding stock. h&r p.p.p.
(0) (0)
Very nice, fit well, greatRated 5 out of 5 27
by Chris M.
Very nice, fit well, great price. Very happy!
(0) (0)
perfect fit, no problems. GreatRated 5 out of 5 27
by Francis H.
perfect fit, no problems. Great add on to my fold-over stock.
(0) (0)
Work's great, holds the shellsRated 5 out of 5 27
by Tyler R.
Work’s great, holds the shells very tight! installed quickly and easily and is really secure to the buttstock!!
(0) (0)