AK-47 Strikeforce Handguard

$44.99 $29.88

Made in the USA

Clear
Compare
SKU: AKA3500 Category:

Fits: Most AK stamped receivers

Note: Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)

  • Strikeforce Rifle Handguards
  • Ergonomic Design
  • Non-Slip Textured
  • Accent Lines Provide Additional Grip
  • Ventilated Upper and Lower Handguards
  • Four Forward Picatinny Rail Locations
    • One 4″ Picatinny Rail
    • Two 2″ Picatinny Rails
    • One 2″ Picatinny Rails with Swivel Stud
    • Blank Inserts for When Rails are Not In Use
    • Rails are Removable and Interchangeable
  • Count Towards US Compliance Parts
  • DuPont® Extreme Reinforced Polymer
  • Limited Lifetime Warranty
  • Made in the USA

Notes:

Sling Swivel Studs Accepts ATI’s Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

Warning! – Do Not Over Tighten  Screws (Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty)

Instructions

PDFAK-47 Handguards with Picatinny Rails

Share your thoughts!

4.86 out of 5 stars

21 review

What others are saying

  1. Edward Youngblood

    Slight rework
    21

    by Edward Youngblood (verified owner)

    I had to use a rotozip to open up the forward slot on the lower piece to fit the sling mount/forest lock. After that it fit my 74 perfect.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Manny O.

    AK
    21

    by Manny O.

    nice set up

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Joseph N.

    Excellent to do business with
    21

    by Joseph N.

    Excellent to do business with

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Angel B.

    Install
    21

    by Angel B.

    The top part of hand guard had to be shaved abit to install onto the gas tube. Other than that I would of gave it 5 :star:�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¯�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¸�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Guest

    Excellent
    21

    by Guest

    This is an excellent handguard set. I like the way it fits. It took a bit of modification but that was super easy.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Kurt S.

    Great item
    21

    by Kurt S.

    Fit well looks great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Brad R.

    AK47 handguard
    21

    by Brad R.

    Got the handguard for my PSAK 47 from Palmetto State Armory. Had to do a bit of trimming to get exact fit- this was anticipated and minimal time with a dremel. Came out looking great and now I have a red dot sight on my AK! Nice job ATI.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Bill H.

    Strikeforce AK-47 Handguard
    21

    by Bill H.

    High quality. Optional rail system is the best. Required minor fitting
    on MAK 90 to achieve perfect fit. Highly recommend.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Freddy R.

    Ak-47 handguard
    21

    by Freddy R.

    I purchased a handguard for my ak-47 and I am very pleased with it. It fits nice and it has a comfortable grip. Love the picatinny rails that come with it so you could add many different accessories. Definitely would recommend ATI

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Michael L.

    Really nice upgrade great price.
    21

    by Michael L.

    It took a little trimming with a dremel. It looks great. Very nice upgrade to a low budget rifle.shipping was really fast and cheap!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Earl A.

    ATI Handguard
    21

    by Earl A.

    Upper handguard was well made fit great on my Bulgarian SLR95. I bought it to mount a red dot sight.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Bill C.

    Strikeforce AK handguard
    21

    by Bill C.

    Shipping was on time and packaged well. Installation was easy and didn’t need a lot of adjustment to make it fit. Overall I am very satisfied and will consider more of their products in the future.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. Steve S.

    Handguard
    21

    by Steve S.

    This is a replacement for the same item I already had on my WASR10. I had lost some of the rails and pieces that go where the rails would go. The hand guard is easy to mount. I like that I can still mount the cleaning rod. The only change I would make is to reduce the height of the top piece. I would like to mount a red dot there and still be able to use the iron sights. Still, a good product. Feels good under my hand. Good control of the weapon.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. Charlie B.

    Handguards
    21

    by Charlie B.

    Handguards

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. Chezar S.

    ATI AK handguard
    21

    by Chezar S.

    I love the look and feel of this handguard. I hate the wood look. I have full ATI furniture on my ak now, I have a century arms, had to file it down a bit to makeep it fit. Only took me about 30 mins or install. Definitely worth it. Love the finished product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. Gary V.

    Final product was just what I wanted!
    21

    by Gary V.

    Took me a whole week of on and off grinding and dozens of trial fits. Good thing I had my dependable dremel rotor grinder. But the final fit is very secure and looks very impressive. I have already mounted a red dot Vortex on the upper rail and it feels very sold. Quite happy!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. Steve G.

    I like the handguard. I
    21

    by Steve G.

    I like the handguard. I have a saiga, that handguard was uncomfortable and I did not like how it felt when grasping it. the handguard I have from ati is more comfortable. thank you

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. Quinn C.

    It was a good experience
    21

    by Quinn C.

    It was a good experience working with ATI

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. Mark G.

    Think they were easy to
    21

    by Mark G.

    Think they were easy to install made the gun look great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. John C.

    I returned these. They did not fit my Zastava NPAP. However I like your products and have them on other weapons.
    21

    by John C.

    See above

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. Matthew H.

    REALLY GREAT PRODUCTS!!!!!!!!!!!!
    21

    by Matthew H.

    I purchased these to finish my AK 47 upgrades. They were easy to install, worked great and looked really good too. I would recommend these products to anyone looking to upgrade their weapons capabilities, and looks!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up