AK-47 Strikeforce Handguard

$34.99 $29.88

Made in the USA

Clear
Compare
SKU: AKA3500 Category:

Fits: Most AK stamped receivers

Note: Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)

  • Strikeforce Rifle Handguards
  • Ergonomic Design
  • Non-Slip Textured
  • Accent Lines Provide Additional Grip
  • Ventilated Upper and Lower Handguards
  • Four Forward Picatinny Rail Locations
    • One 4″ Picatinny Rail
    • Two 2″ Picatinny Rails
    • One 2″ Picatinny Rails with Swivel Stud
    • Blank Inserts for When Rails are Not In Use
    • Rails are Removable and Interchangeable
  • Count Towards US Compliance Parts
  • DuPont® Extreme Reinforced Polymer
  • Limited Lifetime Warranty
  • Made in the USA

Notes:

Sling Swivel Studs Accepts ATI’s Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

Warning! – Do Not Over Tighten Screws (Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty)

Instructions

AK-47 Handguards with Picatinny Rails

Share your thoughts!

4.83 out of 5 stars

23 review

8 reviews with a 5-star rating

  1. David wallace

    5 stars00
    23

    by David wallace (verified owner)

    Great product it works . looks good an rugged

    341808 (0) 341808 (0) 341808

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Edward Youngblood

    Slight rework
    23

    by Edward Youngblood (verified owner)

    I had to use a rotozip to open up the forward slot on the lower piece to fit the sling mount/forest lock. After that it fit my 74 perfect.

    255600 (0) 255600 (0) 255600

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Manny O.

    AK
    23

    by Manny O.

    nice set up

    250678 (0) 250678 (0) 250678

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Joseph N.

    Excellent to do business with
    23

    by Joseph N.

    Excellent to do business with

    250677 (0) 250677 (0) 250677

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Guest

    Excellent
    23

    by Guest

    This is an excellent handguard set. I like the way it fits. It took a bit of modification but that was super easy.

    250676 (0) 250676 (0) 250676

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Kurt S.

    Great item
    23

    by Kurt S.

    Fit well looks great

    250675 (0) 250675 (0) 250675

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Brad R.

    AK47 handguard
    23

    by Brad R.

    Got the handguard for my PSAK 47 from Palmetto State Armory. Had to do a bit of trimming to get exact fit- this was anticipated and minimal time with a dremel. Came out looking great and now I have a red dot sight on my AK! Nice job ATI.

    250674 (0) 250674 (0) 250674

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Bill H.

    Strikeforce AK-47 Handguard
    23

    by Bill H.

    High quality. Optional rail system is the best. Required minor fitting
    on MAK 90 to achieve perfect fit. Highly recommend.

    250673 (0) 250673 (0) 250673

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up