Strikeforce Shotgun Forend

$29.99

Strikeforce Shotgun Forend in Black

Clear
Compare

Fits: Most 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870, and Winchester 1200/1300/SXP Shotguns

Does Not Fit: Remington 870 DM & Mossberg 590M

Note: Mossberg forends require a 6 3/4″ slide action tube, Maverick shotguns will also require the addition of a Mossberg 6 3/4″ slide action tube.

*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Forend Tubes with a Minimum Length of 6 ¼ Inches are Required for use of this Product.

  • Tactical Shotgun Picatinny Rail Package
    • One Left 2″ Picatinny Rail
    • One Right 2″ Picatinny Rail
  • Picatinny Rails Allow for Easy Installation of all Your Favorite Accessories
  • Blank Inserts for When Rails are Not in Use
  • Textured Forend
  • Very Tough, yet Extremely Lightweight
  • DuPont® Extreme Temperature Glass Reinforced Polymer
  • Manufactured in the USA
  • Limited Lifetime Warranty

Warning!!! – Do Not Over Tighten Screws
Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty

Instructions

PDFTactical Shotgun Forend

Share your thoughts!

4.74 out of 5 stars

133 review

What others are saying

  1. Gerald Lipowski

    Love ATI products
    133

    by Gerald Lipowski (verified owner)

    As always ATI product are easy to install.
    Delivery is right on time as they predicted it would

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Corey E.

    Fits great and looks good
    133

    by Corey E. (verified owner)

    Fits great and looks good

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Brian O.

    Install on H&R Pardner
    133

    by Brian O. (verified owner)

    Installation was simple and straight forward. If you have basic tools and know how to use them, this is no more than ~30-40 install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Stacey S.

    Nice upgrade to my Winchester
    133

    by Stacey S. (verified owner)

    Nice upgrade to my Winchester 1300

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Authur A.

    awesome
    133

    by Authur A. (verified owner)

    wish the loops to keep shape was already removed but get their purpose all around satisfied

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Frank H.

    Great product
    133

    by Frank H. (verified owner)

    Made in China, absolutely not! Couldn’t be happier with this company!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. JJ

    Nice Forend for Winchester SXP Defender
    133

    by JJ (verified owner)

    It’s a nice forend for Winchester SXP Defender. Customer service at ATI is very reponsive, too. I installed heatshield as well. The heatshield does get in the way of sliding the action ever so slightly but this doesn’t seem to be due to the fault of ATI. I just need to adjust the heatshield a bit. Overall, the forend is very good. Feels great and secure on hand. If there is a complaint, adding all the accessories adds weight to the shotgun. I gave ATI’s heashield, foreend and the stock. They all look and feel great. On a side note, one person mentioned the need of a spacer for installing this forend for SXP Defender. I did not run into this issue at all.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Rena L.

    Stevens Savage 320
    133

    by Rena L. (verified owner)

    Had to do minor adjustments but works great on my Savage (Older Model) 100% Satisfied with the product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Grady C.

    Awesome product!
    133

    by Grady C. (verified owner)

    Awesome product! Looks great on my mossberg 535.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Jeremy D.

    Hard to get fittings in
    133

    by Jeremy D. (verified owner)

    Hard to get fittings in

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Joshua G.

    Shipping was quicker than expected,
    133

    by Joshua G. (verified owner)

    Shipping was quicker than expected, love it

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. William L.

    You can not beat the quality, service and price
    133

    by William L. (verified owner)

    This is a great company. They have excellent quality products. Great prices. But the most important thing is their customer service. Their walk matches their talk, what they tell you will happen at the time they say! It was a 1 pleasure to do business with them. I would not hesitate to recommend them to anyone.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. BRIAN K.

    Great Forend!
    133

    by BRIAN K. (verified owner)

    Matches well with the Strikeforce foldable shotgun stock!
    Turned my Old Winchester 1200 “that just sat in the safe” into a useful Home Defense Tool!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. David G.

    I love it, feels great
    133

    by David G. (verified owner)

    I love it, feels great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. Tyler D.

    Awesome product
    133

    by Tyler D. (verified owner)

    Fit great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. Cliff W.

    I really dig it :+1:
    133

    by Cliff W. (verified owner)

    I really dig it :+1:

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. Terrence G.

    Top Notch
    133

    by Terrence G. (verified owner)

    Impressive, sturdy construction. Excellent finish

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. Steve C.

    Great product
    133

    by Steve C.

    Great product

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. Jeff W.

    Nice Forend!
    133

    by Jeff W.

    Forend went together as described. I like the look and feel, fits my hand well.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. Daniel O.

    Awesome forend
    133

    by Daniel O.

    Awesome forend

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. Matthew S.

    Good quality
    133

    by Matthew S.

    I enjoyed installing this. It was a little complex but the instructions were great. Only issue I ran into were the array of adapters were inside one another so for about 5 min I thought I was missing the one I needed for my specific gun. Great product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  22. Chris V.

    Put this on two mossberg
    133

    by Chris V.

    Put this on two mossberg 500�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��s , instal was simple. Feels great in the hand. No issues with binding while racking. Excellent buy great price fast shipping. Can go wrong with ati. Just wish ati would make a grip for some other revolvers besides a Taurus.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  23. Ryan C.

    ATI for the win
    133

    by Ryan C.

    Was looking for a new forend for my mossberg 500 and ATI delivered the best service in relation to guns I�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��ve seen so far delivery was speedy, forend was nice and undamaged, and customer service was swift to reply to any concerns.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  24. James L.

    ATI Mossberg
    133

    by James L.

    I found the fit and look of the Strikeforce forend to be awesome. The operation and rails were a step up. The instructions, though, were to generalized. I felt it took longer to install than necessary. But, the product is well worth the effort.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  25. Roger G.

    Worth the trouble?
    133

    by Roger G.

    Installed on my Winchester Defender. Great look and function, sub par (confusing/ambiguous) instructions. Good thing I like puzzles. Perfect compliment to folding stock previously installed. I like it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  26. Guest

    Great for light mounting
    133

    by Guest

    The perfect part to a new build love it easy to install wish I had on all my shotguns.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  27. Donald T.

    went on fairly easy, good
    133

    by Donald T.

    went on fairly easy, good price, functions well

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  28. Jovon B.

    Plastic rail
    133

    by Jovon B.

    The Picatinny rails are plastic… over tightening is a factor … Having that mental security of a good metal on metal fit would�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��ve been great but very solid otherwise !!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  29. David L.

    Great product, installed on my
    133

    by David L.

    Great product, installed on my Winchester 1300 with flashlight and laser.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  30. JLS Public Safety LLC

    Excellent!!!
    133

    by JLS Public Safety LLC

    The fit and feel are incredible! Installation was super easy! I’ll definitely keep these in mind for my next project!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  31. Vunrader

    Great Forend
    133

    by Vunrader

    Fits great on my 88 great service and fast shipping great company

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  32. Guest

    Great product!!!
    133

    by Guest

    Great product!!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  33. Clinton S.

    Fore grip
    133

    by Clinton S.

    Great product. Easy installation

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  34. John S.

    great product
    133

    by John S.

    first time attempting an upgrade on my own. it was fairly simple by following the instructions and watching a youtube video.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  35. Riley S.

    Good product
    133

    by Riley S.

    Good looking,tough and great ATI service as always

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  36. Guest

    Definitely A Great Buy
    133

    by Guest

    Compliments my 12 Guage very nicely. The mounts are in a perfect location. Thanks ATI

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  37. Troy H.

    ATI strike force forend
    133

    by Troy H.

    Quality product, fit and feel better than OEM. Only took off one star due to forward end of picatinny rails being angled. While it looks cool,it creates a bit of a sharp edge…not a problem once your accessories are attached

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  38. Chris M.

    It fits the Stevens 320......I promise you!!!
    133

    by Chris M.

    The key is you have to shorten the front spacer so the end screw has enough threads to tighten down. I took a sanding block and put it in a vice grip, and then just rubbed the spacer in a circular motion until it was short enough so that enough threads show. Also, you have to clip off the top of the spacers or else the slide catches. If you take your time and do it right, it fits like a glove and looks beautiful! Buy it, you�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��ll be glad you did.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  39. Michael K.

    Awesome service
    133

    by Michael K.

    Had no problem placing my order and very quick and reliable delivery. Would def order from here again.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  40. Trusy C.

    Winchester sxp defender
    133

    by Trusy C.

    I had to make my own spacer due to the adapter not being able to tighten all the way. When I installed it I couldn�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t get it tight. I used the adapter for my gun but still had to make a spacer to get it tight

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  41. Zachery M.

    Excellent customer service and grade A product
    133

    by Zachery M.

    Like many others before, I upgraded my maverick 88 action slide assembly to that of a Mossberg 500 the problem was I wasn’t sure what length and size end nut to get to fit this product, so I did the online chat and the customer service representative cleared up any confusion I had, once I got all the parts in every thing fit perfectly

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  42. Eric H.

    Liked it
    133

    by Eric H.

    Liked it

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  43. Yuri K.

    Tight fitment, grip too smooth.
    133

    by Yuri K.

    Fit was great, built very strong. Grip surface was too smooth for bare hands so i cut some stick on grip and its perfect.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  44. Tony S.

    Great service
    133

    by Tony S.

    Great service

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  45. Jason K.

    Great addition
    133

    by Jason K.

    Perfect placement for a light.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  46. Xiaobo H.

    not so good
    133

    by Xiaobo H.

    Hard to install. You need to get a wrench first or you have to disassemble the gun. No information about how to choose one of the parts in the box.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  47. Randy S.

    Randys bad boy gun
    133

    by Randy S.

    Made the perfect home defence tool with the adjustable stock. Would have given it 5 stars if it had more grip on the forearm being it’s a pump.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  48. Nikki S.

    awesome
    133

    by Nikki S.

    The fit was pefect on my mossberg 500. I love the feel and stability of this product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  49. Kevin K.

    Great looking forend, perfect for
    133

    by Kevin K.

    Great looking forend, perfect for mounting a tactical light to your shotgun!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  50. Robert

    Excellent foregrip!
    133

    by Robert

    I purchased this for my Stevens 320, not realizing it wasn’t a 100% perfect fit out of the box. That was my mistake! However, I was able to use a bench grinder to alter the interior rings slightly so they gave it a nice, tight fit. After firing it quite a bit, the forend has not slipped or come loose at all. It does get a little slick if you’ve got clammy hands, but other than that it looks awesome and performed well.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  51. James G.

    ATI creates really solid parts
    133

    by James G.

    I live in Wisconsin so I want to support it. What really helps is that they make really quality parts and have exceptional customer service. It�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��s a win-win!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  52. Donald S.

    Great Forend
    133

    by Donald S.

    I bought this for a Stevens 320 12GA even though it wasn’t listed as a shotgun this would fit. It took only slight modification to one of the adapters and it fito perfectly. It seems like a very sturdy product and matches the stock I bought perfectly. I couldn’t be happier with this product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  53. Matthew J.

    Bear mace
    133

    by Matthew J.

    This shotgun is ATI from the formarm to the stock. Handles well and completes task that I formed too. Got price and quality at ATI.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  54. Tommy H.

    A little hard to install
    133

    by Tommy H.

    A little hard to install but I can�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t wait to test it at the range.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  55. Abraham P.

    Remington 870 express
    133

    by Abraham P.

    Remington 870 express

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  56. Jesus G.

    Bad ass- anything out there!
    133

    by Jesus G.

    This fore end feels great, superior quality. Love the color. Matches well with folding stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  57. Matthew H.

    Winchester SPX
    133

    by Matthew H.

    Good forend to go onto my Winchester SPX. I’m a little disappointed in the grip of the forend, as the plastic is slicker than I would prefer. I think I may add on a piece of textured rubber to make it a bit grippier. Outside of that, it was fairly easy to install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  58. Angel O.

    ATI Destroyer Gray Forend
    133

    by Angel O.

    Awesome product! Gives my Remington 870 Tactical a badass look.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  59. Trevor B.

    Solid.
    133

    by Trevor B.

    Sturdy product, great price, easy install, looks awesome, works great. 10/10 would buy again.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  60. Nathan A.

    Awesome product that's very well
    133

    by Nathan A.

    Awesome product that’s very well constructed I would recommend it to anyone

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  61. Matthew F.

    Good addition to my firearms
    133

    by Matthew F.

    Like the forearm, only downside is a very sharp point where the picatinny rail mounts. Directions are a little difficult but adequate. Would recommend to buy.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  62. One person found this helpful
    Mark

    Mossberg 500 - Great once modified
    133

    by Mark

    Once I was able to install the forend it was a good but it did some work to make it fit. Once I installed it, the forend would get stuck on the widest part of the barrel when reloading. I filed the inside of the fired and now it fits perfectly. It would be nice if they had pre drilled holes on the bottom to add a rail.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  63. Kevin O.

    Winchester Defender forend
    133

    by Kevin O.

    Excellent product and it looks BA on the shotgun coupled with the strikeforce stock. Assembly required a little patience to figure out for sure the correct adapters as the instructions were a bit confusing on which one to use. I love it and glad I purchased it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  64. Daniel C.

    Excellent product
    133

    by Daniel C.

    The fit is very nice and it looks amazing

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  65. Hailey H.

    Excellent
    133

    by Hailey H.

    Great product! The shipping was fast and as scheduled, even around Christmas. The product was exactly what we were expecting and my boyfriend loves it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  66. Hailey H.

    Great experience!
    133

    by Hailey H.

    I received my product quickly and it was exactly what I wanted! I even ordered near Christmas time and there was no delay in delivery. My boyfriend loves it for his new shot gun!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  67. Donald B.

    Savage Stevens 320
    133

    by Donald B.

    This is a shorter Forend than whats on the Stevens. But it fits as long as you use Winchester 1300 rear adapter with no front Adapter.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  68. Andrew M.

    OMG What a great addition
    133

    by Andrew M.

    Just what the gun needed, this forend makes it easy, a flashlight at my fingertips. Easy bolt on out of box.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  69. Reason A.

    Great look and snug fit!!
    133

    by Reason A.

    I bought this forend for my Winchester 1200 and it fits great. It was not hard to install as long as you use the instructions. It comes with different spacers and fitting for different shotguns. After installing my win 1200 looks totally different. Great forend, great product and awesome fit.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  70. Luis G.

    Great product
    133

    by Luis G.

    It take a little to get used to but overall great product so far.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  71. Ray T.

    ati forarm and stock
    133

    by Ray T.

    fit great easy to install and woork just as I hoped

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  72. Matt B.

    Great value
    133

    by Matt B.

    Fit, looks and function are great for the price.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  73. Enos D.

    10
    133

    by Enos D.

    10

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  74. Paula B.

    Love ATI
    133

    by Paula B.

    I love there products they fit right on and feels comfortable in use.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  75. Leo V.

    Like it Win 1200 shotgun
    133

    by Leo V.

    Easy to install and I like the grip. Had to modify my shotgun rack for the bigger fore grip but that was easy. Bought one for my wife’s Win 1300

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  76. Marty R.

    Forearm for my 870 Remington
    133

    by Marty R.

    Was exactly what I ordered, the instructions were clear as far as assembly, just wish they would have included the little metal tab to take the ring off in front of the forearm.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  77. Christopher D.

    Quality made great fitment fast
    133

    by Christopher D.

    Quality made great fitment fast shipping

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  78. Anthony C.

    Perfect fit on Stevens 320
    133

    by Anthony C.

    The savage stevens 320 was not listed as a gun this would fit. I tried it anyway. All you need to do it put one of the Winchester spacers on the back part and none on the front and it fits like a glove. Took it out for a test drive and it works flawlessly! It really dresses up the gun nice.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  79. William J.

    Strike force shotgun forend grip
    133

    by William J.

    Addded forend grip to complete my ATI
    Strike force folding stock. Components
    Fit fine and look great. # on parts could use larger and clearer, I figured it out and it works and feel great !

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  80. Thomas V.

    Strike Force Shotgun Forend
    133

    by Thomas V.

    Looks great on my Mossberg 500. Love the FDE

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  81. Scott R.

    Stevens 320
    133

    by Scott R.

    It worked with my stevens 320 18 inch barrel. Just had to use one that i notched a tiny bit. Wasnt a big deal. Took longer to figure put the roght combination but fits great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  82. Heriberto N.

    ATI Forend for Mossberg 500
    133

    by Heriberto N.

    Install was straightforward and easy. Good instructions. I like the looks. Would’ve given 5 stars if the area for hand placement had more aggressive texture (stipling).

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  83. Ian O.

    Winchester sxp 18"
    133

    by Ian O.

    Fits perfectly! Looks amazing in tan! Can’t go wrong with ATI gun parts! The best and made in the USA!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  84. Jarrid R.

    Solid
    133

    by Jarrid R.

    Easy to install and has a good shape and fits the hand. Nice feel to it. Would like to see a third rail capability added to the underside. Haven’t fired the weapon yet with the forearm installed, but have a feeling there will be no issues. Would recommend to anyone.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  85. Richard H.

    Stevens 320
    133

    by Richard H.

    Looks great and works great. You don’t use the spacer on the top end. Just screw down the castle nut. It took me a while to figure that out. Hope this helps.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  86. Daniel C.

    An amazing product
    133

    by Daniel C.

    I got the tactical stock and forend for a Mossberg 500 loved it absolutely loved it my wife has multiple health issues and she is able to shoot a 12 gauge now

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  87. Clay H.

    Tac Forend on a 870
    133

    by Clay H.

    The installation was smooth but the forend is much wider then the regular forend on the 870. I like the slimmer feel better but if you want a wider forend this one is great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  88. Roger M.

    Winner! ATI Tactical Shotgun Forend Part #: TSG0300.c
    133

    by Roger M.

    Installed on a Savage/Stevens Model 320 (Winchester 1300 clone). Only needed the rear adapter that was called for to install. Perfect fit, flawless function. I purchased it in FDE as I planned on spraying the firearm with Cerakote C-Series Magpul FDE. The color is spot on. This replaced an over molded fore end I had installed and is really an improvement. Great feel easy to grip and less bulky, just seemsa to make the gun handle quicker. Haven’t mounted the rail system yet but will do so eventually. Great purchase of an outstanding product. I feel it’s made that little difference that means a lot. Thanks for the great fore end ATI.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  89. Roger C.

    Its awesome do you make
    133

    by Roger C.

    Its awesome do you make one for a 20ga mossberg shotgun

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  90. Kevin D.

    All items as described -
    133

    by Kevin D.

    All items as described – will buy again A�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  91. Tyler S.

    Great product
    133

    by Tyler S.

    Great product

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  92. Ravindra R.

    Awesome products, but shipping was
    133

    by Ravindra R.

    Awesome products, but shipping was horrible.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  93. Horacio R.

    Very good experience only issue
    133

    by Horacio R.

    Very good experience only issue was UPS tracking number did not work

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  94. Christopher R.

    So far... GREAT! Only thing...
    133

    by Christopher R.

    So far… GREAT!
    Only thing… jeez… that tiny screw that holds stock into slide… the first one stripped head, but I got it out… and the 2nd one – I was afraid it was going to shear but I got it up into the hole so there’s no slack in the slide… but it was close to shearing too… then I’d’ve been toast.
    I don’t know if that screw/bolt hole wasn’t predrilled, but it didn’t feel right for sure, but once about halfway, had to just finish, don’t think I’ll be able to remove this from gun easily though!
    Feels great and should allow me to easily use this one gun now for different shooters which was my goal!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  95. Chris C.

    I love it but one
    133

    by Chris C.

    I love it but one month too get it was not happy about that

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  96. David C.

    The forend fits a little
    133

    by David C.

    The forend fits a little too loose on the shotgun, allowing a little rotatation. The adapter needed on the front of the forend didn’t fit tightly.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  97. Chris G.

    Excellent product! Wonderful customer service.
    133

    by Chris G.

    Excellent product! Wonderful customer service.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  98. Noah L.

    Great design! Fits great on
    133

    by Noah L.

    Great design! Fits great on my Winchester SXP.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  99. Marvin B.

    Excellent product, fits easily, follow
    133

    by Marvin B.

    Excellent product, fits easily, follow directions and it will for perfectly

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  100. Guest

    I purchased the ati folding
    133

    by Guest

    I purchased the ati folding stock and foreend for a mossberg and an ar grip and I have to say their products are awesome. Shipping was slow probably due to holiday took me a month to receive them but worth the wait

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  101. Christopher M.

    Good quality !
    133

    by Christopher M.

    Good quality !

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  102. Anthony T.

    Well made product. Seems sturdy
    133

    by Anthony T.

    Well made product. Seems sturdy and well built and installed fairly easy. Received it quickly and as advertised.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  103. Payton P.

    I couldn't get product to
    133

    by Payton P.

    I couldn’t get product to mount on the gun. I did a little to much trimming on it to send it back. I’m running my stock forend with the foldable stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  104. Justin M.

    Best customer service. The forend
    133

    by Justin M.

    Best customer service. The forend work as described.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  105. Ernie H.

    Good grip, easy to work.
    133

    by Ernie H.

    Good grip, easy to work. The railings are conveniently places so I can mount a tactical light.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  106. Joseph M.

    Fast delivery, all product in
    133

    by Joseph M.

    Fast delivery, all product in stock, I had a great experience.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  107. Vonkucci

    Good stuff fits great
    133

    by Vonkucci

    Good stuff fits great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  108. Scott C.

    Great stuff
    133

    by Scott C.

    Great stuff

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  109. Larry P.

    I'm very happy with my
    133

    by Larry P.

    I’m very happy with my purchase. The forend was easy to install and looks great! Thanks ATI!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  110. Tom

    I had to modify it
    133

    by Tom

    I had to modify it quite a bit because I have a sidesaddle shell holder on the left side. Other than that, good product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  111. Angry F.

    excellent
    133

    by Angry F.

    took a little longer to install than expected but it works great and looks badass. h&r p.p.p.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  112. Tony J.

    Great fit,fast shipping happy
    133

    by Tony J.

    Great fit,fast shipping happy

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  113. Patrick L.

    Just what I wanted
    133

    by Patrick L.

    Just what I wanted

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  114. Travis

    Nice fit & build; does the job well. Definitely recommended.
    133

    by Travis

    The forend fit is snug and solid. Pretty darn easy to install. I’ve had the ATI tactical forend for many months now, and many many shells. Still just as solid as day 1!
    Unexpected positive: because the ATI forend is significantly lighter than the original, the already rapid pump on the SXP is now SUPER FAST (almost slides back on its own). Minor negatives: 1) you can’t mount a pic rail on the bottom (just the sides); 2) when shooting, I have to be careful not to put my thumb too close to the edge of the rail or it kinda smarts on recoil.
    I purchased this forend primarily for a light (and not into unloading $$ on a forend light). The ATI tac forend a 200 lm light = $ WAY under that other company’s WeaponLight! …and works great for the occasional nighttime need. Thanks ATI!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  115. Dan M.

    Overall, it's a good forend.
    133

    by Dan M.

    Overall, it’s a good forend. I ended up having to add some grip-tape as it’s fairly smooth. The Picatinny rails are hugely appreciated.

    My biggest complaint is the instructions. There’s a bit more removal of plastic mold-bits than is evident in the instructions. The black-and-white photos are just about impossible to see any detail. I wish they’d improve upon their visuals and step-by-step. Unlike another forend I tried (and tossed) this one fit properly with just a bit of filing to get the guide arms through. No major Dremel-surgery. It was a pleasure to have it fit as well as it does.

    It’s a great upgrade. I’ve combined it with my ATI stock and the 870 is really dressed for success.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  116. Ronnie C.

    Very well made and easy
    133

    by Ronnie C.

    Very well made and easy to install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  117. Karl L.

    Easy to mount and good
    133

    by Karl L.

    Easy to mount and good precision

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  118. Kyle B.

    It is awesome ! Works
    133

    by Kyle B.

    It is awesome ! Works great and looks awesome !

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  119. Brian G.

    This is my second forend
    133

    by Brian G.

    This is my second forend for a Mossberg 590 purchased from ATI, and as always, I am happy with my purchase!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  120. William P.

    Quality product. Installed easily.
    133

    by William P.

    Quality product. Installed easily.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  121. Gino R.

    Love it
    133

    by Gino R.

    Love it

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  122. Ruiz4251

    Well Made
    133

    by Ruiz4251

    Great piece to add to a shotgun, although I would consider the aluminum forend for more aggressive use, for home and range use this is a great add on. This forend requires some trimming to fit (nothing some snips cant handle) and after you find the proper adaptors for your specific set up it seems to be loose (simple fix = epoxy), however this issue does not effect the performance of the forend or the shotgun itself. After the fix,
    the forend has held up after extensive use at my local range.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  123. Justin S.

    Well made.looks great .not quite
    133

    by Justin S.

    Well made.looks great .not quite as much grip as id like and the picitinny rails were needle sharp..not prob.literally took me 5 seconds to nip off tips on right and left side. Do recommend and yes would buy again.the only real problem was it took 2 weeks to get. .thanks

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  124. Dorian O.

    I purchased the tactical forend
    133

    by Dorian O.

    I purchased the tactical forend to go with the Talon T2 pistol grip on a Winchester 1300. One of the nice things about a 1300 with a pistol grip is that it’s slim and handy. I searched all over the internet for pics of the ATI forend installed and found only profiles, in which the ATI tactical forend looks great. Without a top-down shot though, I had no idea how wide the piece is. The positives are that it is a super stiff, robust part with no wobble whatsoever. It fits to the slide arm snugly and indexes tight against the arms to prevent rotation. Functionally, it’s a solid piece that seems properly engineered and tough as nails. Aesthetically, I wish it were slimmer and that the rails didn’t stick out like big hooks to catch on everything.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  125. J. P.

    Great forend replacement. Fits well
    133

    by J. P.

    Great forend replacement. Fits well and feels solid. Larger diameter than stock 870 foreend so small hands might not like it. Only complaint is the width after adding side rails, and no slot for bottom rail.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  126. Andrew D.

    Outstanding quality, great price. Definitely
    133

    by Andrew D.

    Outstanding quality, great price. Definitely using your products for future projects!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  127. Christopher S.

    Decent build quality. I appreciate
    133

    by Christopher S.

    Decent build quality. I appreciate that they send the blanks cover the rails should you decide not to use them.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  128. Mark B.

    Very nice product
    133

    by Mark B.

    Very nice product

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  129. Sherry L.

    excellent quality thank you
    133

    by Sherry L.

    excellent quality thank you

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  130. Ray S.

    Minor modifications were needed to
    133

    by Ray S.

    Minor modifications were needed to install pump grip, but I love all of my ATI gear.Quality and fair prices.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  131. Eric R.

    Only thing I believe should
    133

    by Eric R.

    Only thing I believe should be stated in the specifications of the product is that the dimensions differ from original firearm components and may not be compatible with other additions (6 round side-saddle). Aside from that, great product and looks awesome!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  132. Shawn.Patrick.18

    Modification required
    133

    by Shawn.Patrick.18

    If you have a Winchester 1300 with the 6.25″ forend tube, this will not be a direct fit. The front spacer ring will not allow for the slide arm cap to be installed on the slide arm extension. I may have to trim off about 3/16 of an inch of plastic to make this thing work. It came in the nicest packaging I’ve ever seen for a gun part. And I received it 2 days after I ordered it (I did NOT pay for that!).

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  133. Shawn.Patrick.18

    Modification required
    133

    by Shawn.Patrick.18

    If you have a Winchester 1300 with the 6.25″ forend tube, this will not be a direct fit. The front spacer ring will not allow for the slide arm cap to be installed on the slide arm extension. I may have to trim off about 3/16 of an inch of plastic to make this thing work. It came in the nicest packaging I’ve ever seen for a gun part. And I received it 2 days after I ordered it (I did NOT pay for that!).

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up