TactLite GEN2 AR-15 Mil-Spec Stock & Buffer Tube Assembly Package

$94.99

Made in the USA

Clear
Compare
SKU: C.2.10.2214 Categories: ,

Fits:

  • Most AR-15 variants.
  •  Does Not fit AR-10 or .308 Variants

Features:

  • TactLite GEN2Adjustable Rifle Stock
  • Six-Position M4 Style
  • Weighs Only 6.10 Oz
  • TracLOCK GEN2 System
    • Provides Smooth Secure Stock Adjustments
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Locks Down Firm with One Lever – No Need for Secondary Locking Mechanisms
  • No Interference with the Charging Handle
  • No Snag Points
  • X Series Thin Butt-Pad
    • Non-Slip, Removable
    • Upgrade to an X1 or X2 Recoil Reducing Pad! Less Recoil and Greater Length of Pull!
  • Dual Sided QD Attachment Point
  • Slot for Tactical Sling Attachment
  • Six Position, Mil-Spec (Military) Buffer Tube
    • Mil-Spec Diameter Tube for Maximum Fit into the Mil-Spec Stock
    • Constructed of Military Type III Anodized, 6061 T6 Aluminum
  • Includes Steel Military Grade E-Coated Castle Nut and Locking Ring
  • Includes AR-15 Recoil Plug & Buffer Spring
  • Weatherproof
  • DuPont® Extreme Reinforced Polymer
  • Limited Lifetime Warranty
  • Made in the USA

Notes – TactLite Stock Upgrades:

The ATI X1 & X2 Recoil Reducing Pads Provide Recoil Reduction & Increase Length of Pull! Part #’s A.5.10.2531 & A.5.10.2530

The TactLite Stock will Accept the ATI TactLite Adjustable Cheekrest Kit to Increase Cheekrest Hight Up to 1 1/4″, However the Stock Must Be In the Fully Extended Position to Avoid Charging Handle Interference. Also Great for Use with Side-Charging AR-15’s!

Instructions:

AR-15 TactLite GEN2 Six Position Mil-Spec Stock with Military Buffer Tube Assembly

Share your thoughts!

4.87 out of 5 stars

52 review

What others are saying

  1. Gerald S.

    Two ATI Telescoping Stocks
    52

    by Gerald S.

    I purchased two telescoping buttstocks from ATI in early October; one for a Mossberg 591 and one for an FN AR-15. Both arrived in a timely manner and after a month of frequently shooting these firearms, I can report they have exceeded my expectations. They are stoutly constructed and wholly without the loose wobble so often found in telescoping buttstocks. I am well pleased with them and I am glad to recommend ATI products to my friends. GVS: Bozeman, Montana

    253417 (0) 253417 (0) 253417

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Michael M.

    Exactly what I was looking for
    52

    by Michael M.

    Inexpensive and very well made. It’s very light, but that has a lot to do with the absence of a butt stock pad. The only reason I gave it 4 stars instead of 5 is because I had to purchase a thicker one to install. It was a little difficult to slide on the buffer tube at first but after working back and forth a few times it was perfect. I would definitely buy this package again.

    253416 (0) 253416 (0) 253416

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Paul F.

    Great stocks and grips
    52

    by Paul F.

    I bought the stock assembly and grip and couldn’t be happier. The grip really eases recoil and the stock looks sharp and is light

    253415 (0) 253415 (0) 253415

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Shawn

    Awesome
    52

    by Shawn

    No extra noise, no wobble like most 6 position stocks this stock feels better than any other stock out there looks great to I would switch to this on almost any of my ARs

    253414 (0) 253414 (0) 253414

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Richard L.

    Delivered ahead of schedule. Very
    52

    by Richard L.

    Delivered ahead of schedule. Very easy install. Functions exactly as described.

    253413 (0) 253413 (0) 253413

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Rueben G.

    Love the look and feel
    52

    by Rueben G.

    Love the look and feel haven’t put a round down range but so far it’s great.

    253412 (0) 253412 (0) 253412

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Patrick B.

    Easy to install,no different than
    52

    by Patrick B.

    Easy to install,no different than any other assembly, but the look and feel are awesome. Has to be the lightest stock I’ve ever used. Plus you get the ability to add cheek rest and the even different recoil pads . Awesome product. ATI knocked it out of the park on this one.

    253411 (0) 253411 (0) 253411

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Don S.

    Stock seems pretty good. 1st
    52

    by Don S.

    Stock seems pretty good. 1st time using an ATI Stock on my AR Builds and I am pleased.

    253410 (0) 253410 (0) 253410

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Tim T.

    it was the best investment
    52

    by Tim T.

    it was the best investment I made its my first build.works very good would by again and will.

    253409 (0) 253409 (0) 253409

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Darien B.

    love it
    52

    by Darien B.

    love it

    253406 (0) 253406 (0) 253406

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Continue as a Guest

Don't have an account? Sign Up