Roll over image to zoom in
TactLite AR-15 / AR-10 Mil-Spec Stock
$36.88
AR-15 / AR-10 TactLite Six-Position Adjustable Mil-Spec Stock
Fits: AR-15 / AR-10 Firearms with Military Buffer Tube. (No Buffer Tube is Included with this Stock)
- TactLite Adjustable Rifle Stock
- M4 Style
- Weighs Only 6.10 Oz
- TracLOCK System
- Provides Smooth Secure Stock Adjustments
- Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
- Locks Down Firm with One Lever – No Need for Secondary Locking Mechanisms
- No Interference with the Charging Handle
- No Snag Points
- X Series Thin Butt-Pad
- Non-Slip, Removable
- Upgrade to an X1 or X2 Recoil Reducing Pad! Less Recoil and Greater Length of Pull!
- Dual Sided QD Attachment Point
- Slot for Tactical Sling Attachment
- Weatherproof
- DuPont® Extreme Reinforced Polymer
- Limited Lifetime Warranty
- Made in the USA
Notes – TactLite Stock Upgrades:
The ATI X1 & X2 Recoil Reducing Pads Provide Recoil Reduction & Increase Length of Pull! Part #’s A.5.10.2531 & A.5.10.2530
The TactLite Stock will Accept the ATI TactLite Adjustable Cheekrest Kit to Increase Cheekrest Hight Up to 1 1/4″, However the Stock Must Be In the Fully Extended Position to Avoid Charging Handle Interference. Also Great for Use with Side-Charging AR-15’s!
AR TactLite Six Position Mil-Spec Stock
Great!!!Rated 5 out of 5 67
by Lynn W. (verified owner)
Very happy
(0) (0)
Great stockRated 5 out of 5 67
by Manuel M. (verified owner)
I’ve had great experiences with ATI products before and this was no different. I bought the optional cheek risers for my ar 308 build. Looks great and it functions perfectly.
(0) (0)
Great StockRated 5 out of 5 67
by Larry F.
Just what the Doctor ordered. Fit perfect
(0) (0)
Nice stockRated 5 out of 5 67
by Ed B.
Nice stock not a cheap flimsy noisy stock great fit
(0) (0)
Nice fitRated 5 out of 5 67
by Jason Y.
It has a nice tight fit on the buffer tube and with the addition of the recoil pad it is very nice.
(0) (0)
ButtstockRated 5 out of 5 67
by Garvin A.
Super light and top quality. My 3rd one to purchase
(0) (0)
Good productRated 5 out of 5 67
by Guest
Good product
(0) (0)
Light weight, good buildRated 4 out of 5 67
by Brian W.
I like this but stock, it seems s strong, no side wiggle but does seem to tilt when it’s I’ll the last two positions. You don’t notice when shouldered though.
(0) (0)
A high class stock for the AR 15.Rated 5 out of 5 67
by Richard M.
This is the way to go when you are trying to get a stock build that can be used by all shaped people. Cheek rests and different butt pads available.
(0) (0)
very goog stockRated 5 out of 5 67
by Arthur P.
it fit like it was supposed to with no trouble and works fine.
(0) (0)
Hard to install, but zeroRated 4 out of 5 67
by Bud H.
Hard to install, but zero wiggle.
(0) (0)
Replaced my MFT Minimalist stockRated 5 out of 5 67
by Barkeater
I replaced my MFT Minimalist stock that came on my POF Revolution with this ATI stock. Lock up is tighter and I have the option to add a cheek riser. I like the matte finish of the ATI better as well.
(0) (0)
Not your everyday stock.Rated 5 out of 5 67
by Dennis A.
This stock is perfect choice for any AR build, great fit and comfortable. Please consider this stock, you won�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t regret it.
(0) (0)
Great stockRated 5 out of 5 67
by Brandon G.
Stock is well made and the only issue I had was getting it on my buffer tube. It has spacers that are very stiff to get on so if you are little it may take you a little longer to get it on but once it�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��s on there is no play or movement, up or down, on the stock and has a great grip pad on the end so when you shoot it stays in place. All in all great product, I always buy stocks when they are available from ATI and they work!
(0) (0)
So far so goodRated 5 out of 5 67
by Ryan G.
The stock was a bit difficult to install and I wasn’t able to get it on following the instructions. I had to remove both screws that secure the adjusting lever and slide the assembly forward, removing it from the stock. I then placed the assembly on the bottom of my buffer tube with the metal pin seated in one of the 6 holes for adjusting stock length. I then slide the stock forward onto the buffer tube and the adjusting lever assembly until the holes were aligned and screwed the pieces back together. Not too bad once I have up trying to get it on following the directions.
It’s very tight on the buffer tube but there is no play/wobble as advertised which is probably why it was hard to install. It initially took quite a bit of force to adjust but has loosened up a bit with use and is getting smoother.
I’m also a bit unsure of the material it is made from but only time will tell there. It doesn’t appear to be Fiber Reinforced Nylon (FRN) like Magpul looks to be made from. It looks almost dried out like some plastic that has been in the sun. It may be fine but is a new material to me.
Once on and as of now, it appears to be a nice lightweight stock that looks better than the original and I’m happy so far, especially at the sale price.
(0) (0)
Lightweight, affordable, and sturdyRated 5 out of 5 67
by Jordan C.
The reason I bought this stock was it’s weight and it certainly is light. The build quality is good and it is solid. At full extension there is some wiggle because there isn’t a lot of material to engage the buffer tube. But the weight savings make it worthwhile. I don’t see it having any reliability issues in operation.
(0) (0)
ATI Buffer StockRated 5 out of 5 67
by Keyun L.
Fits really tight! Super light weight, very nice product.
(0) (0)
AR stockRated 4 out of 5 67
by Guest
Nice way to extend the length of your adjustable stock on an AR
(0) (0)
Super light, great priceRated 4 out of 5 67
by Dante D.
I got this on sale with free shipping, I think it was like 22$ shipped which is just damn good for any AR stock probably even a milspec one. This thing is very good, I love how tightly it fits the buffer tube, my only complaint is that the lever to adjust the length feels a little cheap like it could break. but so far no issues with it. the pros outweigh the only con that I can think of.
Pros:
lightweight
snug to the buffer tube
QD attachments
Looks great
Price is great
CON:
Lever feels semi cheap.
(0) (0)
Ati stockRated 5 out of 5 67
by Whitsel J.
This is the perfect lightweight stock. I usually choose magpul but this will be my new go to stock!
(0) (0)
Simple and great.Rated 5 out of 5 67
by Guest
This is a great lightweight stock option. It feels solid against the shoulder with little to no wiggle. For being one of the lightest available, it seems very tough. Also, its a great value!
(0) (0)
Awesome as alwaysRated 5 out of 5 67
by Richard B.
ATI never lets me down. Awesome product, great value
(0) (0)
StockRated 5 out of 5 67
by Rusty P.
I have these on all 3 of my 15’s and very impressed with the fit and the comfort with with the stock pad.
(0) (0)
Tac lite mil-spec stockRated 5 out of 5 67
by David J.
Nice tight fit on the ATI buffer tube
Easy to install
Will be buying again for more builds
(0) (0)
Great StockRated 5 out of 5 67
by M.E.
Was a little difficult getting the stock over the tube, but it has absolutely no play at all. Its very light weight and functions as advertised. For the price, you can’t beat it.
(0) (0)
Good no nonsense stockRated 5 out of 5 67
by Cailin C.
Good no nonsense stock. Only thing I didn’t like was I ordered the extra recoil pad (458 socom) and it’s fit was not as nice as I wold of liked. However it’s probably the most affective recoil pad I’ve ever used.
(0) (0)
Just what you expectRated 5 out of 5 67
by Jeffrey H.
Just what you expect from ati. Good quality, simple to use, and works perfectly every time. I have never had an issue with anything I have purchased from ati. Wll be ordering parts for my next build
(0) (0)
WeightRated 4 out of 5 67
by Jonathan R.
I like this a lot, it is sturdy on my buffer tube. It feels and looks good, especially for the price I paid. The only reason I did not give it 5 stars is because I weighed mine when it arrived and weighed 6.1 oz on two different scales that were accurate. It’s not a big deal to me but if you boast that it is one of the lightest stocks at 5.85 oz, then it should be that. It’s only a .25 oz difference and it should not affect performance. I still like mine though!
(0) (0)
Great StockRated 5 out of 5 67
by Mateen G.
Buttstock is great, nice and light and I got the grip the grip to color match very happy!
(0) (0)
Good stockRated 4 out of 5 67
by James S.
Light, very little wobble, great position for QD mount. Some rough edges.
(0) (0)
Tactlite mil-spec stock reviewRated 4 out of 5 67
by Austin B.
I had a problem with the stock fitting the buffer tube I had to file the tube down quite a bit to finally get it to fit. However I believe this was due to the buffer tube not the stock. The reason for 4 stars is I’m not a huge fan of the finish. It seems as if it was sandblasted and then shipped there does not seem tone any finish done to the stock. I’m going to cerakote it so not a big deal for me but others may like to know. Stock is super light wait and looks great shipping was smooth as well.
(0) (0)
SatisfiedRated 4 out of 5 67
by Tony G.
Very good product; fits perfect; feels and looks great; only reason its not a 5 is because of the minimal pad. You can purchase an upgrade but just thought the stock would be a little better
(0) (0)
Awesome!Rated 5 out of 5 67
by Scott
I love this stock this is my second one. I can’t wait to order more products from ati.
(0) (0)
Great productsRated 5 out of 5 67
by Guest
Ati has great products at reasonable prices I will be purchasing more in the future
(0) (0)
AWESOMERated 5 out of 5 67
by Edwin C.
Great product, fit like a glove, very comfortable and utilitarian.
(0) (0)
One of the lightest AR stocks on the market!Rated 5 out of 5 67
by Zachery S.
Super happy with this lightweight stock from ATI. Super fast shipping as well.
(0) (0)
Lightest stock on the marketRated 5 out of 5 67
by Alejandro M.
Great stock, lightweight, easy to install. I Purchased this with the buttstock pad and the cheek riser. Did i mention it is affordable as well.
(0) (0)
TactLite AR-15 Mil-Spec StockRated 5 out of 5 67
by Bill K.
I like it so much, i am buying another for my Eagle-15
(0) (0)
BEAUTIFUL STOCKRated 5 out of 5 67
by John M.
SIMPLY THE BEST A
(0) (0)
Sleek StockRated 5 out of 5 67
by John B.
I was first introduced to ATI accessories when I purchased a CZ 512 with an ATI rail, pistol grip and stock w/cheek rest on it. I like the stock so much on my CZ that I had to purchase this FDE stock for my next AR build. It satisfies all the functionality of any other stock, but its streamline in comparison to most stocks and very light. The tight fit is awesome as well. If you’re looking for a sleek, yet functional light weight stock, this stock is the one for you. The price is right too.
(0) (0)
Excellent UpgradeRated 5 out of 5 67
by Dave H.
Great looks and functions admirably. A little wobble on tube but tighter than some Magpul MOE stocks I’ve had. Robust material, and I like the QD sling mounts. I have three of these, so………!
(0) (0)
Very light, solid little stockRated 4 out of 5 67
by Derek W.
Have not put the stock through its paces yet as I’m waiting on backordered parts to complete my build. I have mounted on the tube and it feels solid. Very light. Time will tell how it holds up but so far I am pleased with the purchase
(0) (0)
Ati stockRated 4 out of 5 67
by Chris T.
Super lightweight stock. Tight fit for all components
(0) (0)
Amazingly Light Amazingly SimpleRated 5 out of 5 67
by Tanner B.
Very light and looks great. I got destroyer grey and added some black cheekrest’s fro ATI and the grey and black combo is awesome! stock is tight without any play at all.
(0) (0)
Taclite stock in grayRated 5 out of 5 67
by Grant L.
Very nice stock. Fit and finish is what you would expect from a top notch company. Color goes perfect with nickel boron parts. Zero slop in play on the buffer tube and the additional butt pad they offer really finishes it off nicely.
(0) (0)
AR StockRated 5 out of 5 67
by Peter M.
Love the tight fit and look. Great product and price.
(0) (0)
GreatRated 5 out of 5 67
by Jeremy M.
Fits great looks even better
(0) (0)
Great StockRated 4 out of 5 67
by Casey S.
This is a tight fitting stock and it feels solid when shooting. The optional additional rubber butt pad is a good addition if you want a little extra LOP. The release lever is a little sharp in front and doesn’t feel as sturdy as I would like. Overall, I’m happy with it and would recommend over the competition at the same price point.
(0) (0)
perfect fitRated 5 out of 5 67
by Randy D.
the stock and grip were a perfect fit. I love the stock , very snug, no wiggle. The hand grip is very comfortable. would recommend these to anyone.
(0) (0)
Ati AR stockRated 5 out of 5 67
by James M.
Awesome stock. Fits tight with no slop. Lightweight great stock option
(0) (0)
AwesomeRated 3 out of 5 67
by Robert R.
Awesome
(0) (0)
Great product!Rated 5 out of 5 67
by Mark K.
Great product!
(0) (0)
Nice and very lightRated 5 out of 5 67
by Thomas P.
Nice and very light
(0) (0)
There is no better stockRated 5 out of 5 67
by Allen L.
There is no better stock and pistol grip for the money. First thing I do with any AR platform rifles I buy, is remove the magpul and put on ATI. Have them on my AK and AR’s. The pistol grip is fantastic in reducing the recoil of my AK and gives a lot of relief to my hand after a long day of shooting.
I also recommend the recoil pad from ATI, plus they have an adjustable foregrip that is top shelf.
Everything fits perfect.
(0) (0)
The system is great, andRated 4 out of 5 67
by Joshua C.
The system is great, and customer service is excellent.
(0) (0)
Stock is money. Awesome. LightestRated 5 out of 5 67
by Arthur V.
Stock is money. Awesome. Lightest weight adjustable stock on the market as far as I can find. And looks better than the alternative through my eyes. Have it on all my 15s now.
(0) (0)
Gteat productRated 5 out of 5 67
by Anthony R.
Gteat product
(0) (0)
Very nice unit. Fit myRated 5 out of 5 67
by Robert M.
Very nice unit. Fit my Mil-spec BT on my CMMG just fine. No more slop, much lighter and not to mention great looks!
(0) (0)
Freakin awesome and light weightRated 5 out of 5 67
by Zachary T.
Freakin awesome and light weight
(0) (0)
Very good and tight fit,Rated 5 out of 5 67
by Cleve B.
Very good and tight fit, and looks good you
(0) (0)
This stock is very nice.Rated 5 out of 5 67
by Taylor W.
This stock is very nice. Lightweight. Comfortable. Just an all around good product.
(0) (0)
This product exceded my expectations.Rated 5 out of 5 67
by Michael S.
This product exceded my expectations. I researched several other ar-15 stocks and the tactlite looks and feels well designed. Fits everything i was looking for in a stock.
(0) (0)
Love the stock. I boughtRated 5 out of 5 67
by Eric H.
Love the stock. I bought just the stock and it would not fit on my buffer tube. Contacted ATI and they sent me everything so that it would fit. Works well with my 2 pt sling.
(0) (0)
One of the best designRated 5 out of 5 67
by Emmanuel C.
One of the best design accessories for AR builds. Highly recommend!
(0) (0)
I loved it great fitRated 5 out of 5 67
by Nathan S.
I loved it great fit great company they had a shipping problem they emailedme to tell me what was going on will definitely oder from them agin
(0) (0)
Excellent stock. Really nothing elseRated 5 out of 5 67
by Chris T.
Excellent stock. Really nothing else to say. Great product. Nuff Said.
(0) (0)
rock solid and awesomeRated 5 out of 5 67
by Travis L.
this butt stock is awesome not only is it rock solid but because of the way it’s designed it feels better and your transitions are smoother. Like putting a lock on your AR15 to your shoulder!
(0) (0)