Roll over image to zoom in
Strikeforce SKS GEN2 Stock
$139.99
Made in the USA
- Made in the USA
- Limited Lifetime Warranty
Fits:
- SKS Rifles (Minor modification may be required in some cases. Blade bayonet must be removed.)
Features:
- TactLite GEN2 Six-Position Adjustable Stock
- Side-Folds to the Left of the Receiver
- Can be Fired from Folded Position
- TracLOCK GEN2 System
- Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
- Provides Smooth Secure Stock Adjustments
- Eliminates the Need for Secondary Locking Mechanisms
- No Snag Points
- Dual Sided QD Attachment Point
- Removable/Adjustable Cheekrest System
- Elongated Design to Fit All Users
- Includes Short Cheekrest with ½” of Adjustment
- X Series Thin Recoil Pad
- Non-Slip, Removable
- X1 Style Pistol Grip
- Sure-Grip Texture
- Recoil Impact is Absorbed
- Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
- Not Affected by Chemicals or Extreme Temperatures
- Four Forward Picatinny Rail Locations
- One 4” Picatinny Rail
- Three 2” Picatinny Rails
- One 2” Swivel Stud Picatinny Rail
- Blank Covers for Unused Rail Locations
- Additional Ventilation in Forend and Top Cover
- Slots for Tactical Sling Attachment
- Two Sling Swivel Studs
- All Mounting Hardware Included
- Extreme Temperature Glass Reinforced Polymer
- Limited Lifetime Warranty
- Made in the USA
Available Extras & Upgrades:
Upgrade to the ATI X1 or X2 Recoil Reducing Butt Pad for More Comfort and Length of Pull – A.5.10.2530 & A.5.10.2531
Notes:
SKS Scope Mount Not Included/Sold Separately.
Sling Swivel Studs Accepts ATI’s Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel
SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.
Great product and great customer serviceRated 5 out of 5 4.77
by Chad Cowan (verified owner)
This stock fit my SKS great. Had to dremel a couple spots but was very easy and fits great now. Made my SKS look awesome! Would buy again.
(0) (0)
Great StockRated 5 out of 5 4.77
by Travis Hart (verified owner)
Great tight fitting stock, little difficult to put on due to the tightness but very well built and looks amazing
(0) (0)
GREAT FOLDING STOCKRated 5 out of 5 4.77
by Clarence Robinson (verified owner)
LOVE IT, perfect
(0) (0)
Happy customer!Rated 5 out of 5 4.77
by Lance L. (verified owner)
Really well built stock! I ordered and received it in FDE, not destroyer grey as this review says. Fits well and is much more comfortable than the old aftermarket stock I had on my SKS. Works well with my removable mags and vertical foregrip. Had to notch it a little with a dremel near the back of the receiver cover to work with my Matador full length SKS rail. Made shooting my SKS a lot more enjoyable.
(0) (0)
As described. Fit perfect. NiceRated 5 out of 5 4.77
by Jody V. (verified owner)
As described. Fit perfect. Nice finish
(0) (0)
Excellent Folding Stock!Rated 5 out of 5 4.77
by Matthew R. (verified owner)
Inherited my Dad’s old Chinese SKS with a folding stock. It had seen better days: the old stock was cracked at the fold. This new folding stock replaced the old one, and is MUCH better!!
The things I like about this stock are:
– The adjustable stock – No more awkward bending of my arm/shoulder.
– The top-mounted sling swivel attachment. SKS now hangs upright when slung over shoulder. (Old stock was at bottom of grip…)
– Picatinny rails galore: “Fudd” heaven? I slapped a forward grip on it, and will eventually get a flashlight.
– Rubber pistol grip. MUCH more comfortable than my old stock.
Things that should be mentioned:
– Took a bit of filing for a perfect fit. The magazine entrance towards the front needed about 1/4in removed for my drum. The interior sides needed a tiny bit taken off to slide the receiver in easier (still a snug fit!). The single grip screw post needed a bit taken off to be flush with the recess for the rest of grip. All in all, it took minimal time to do this with basic tools, and made for a PERFECT fit.
– Instructions were in “engrish” and missed a couple things (Swivel mount location)
The last thing to mention is about ATI: They have wonderful customer service! I forgot something before ordering; so I contacted their support.
The issue was fixed QUICKLY, even during the pandemic. They have made a lifetime customer! THANK YOU!
(0) (0)
Great product, two issuesRated 4 out of 5 4.77
by Nathan Q. (verified owner)
Overall great feel and look. Super tight fit. Had to “shave” a little to accommodate after market magazines. Biggest complaint, and I didn’t know before I bought, can’t remove bolt cover while in stock. Regretful. Have to remove trigger assembly to get bolt cover out. No field stripping.
(0) (0)
Great productRated 4 out of 5 4.77
by Tyler C. (verified owner)
Had do some slight polymer removal and the grip is a tiny tiny bit movent but looks and looks fantastic
(0) (0)
Strikeforce stockRated 5 out of 5 4.77
by Charles j. (verified owner)
Easy to install and I had a question about the shipping and emailed company and within 45 mins they responded back to me. I’m happy with the customer service and the product.
(0) (0)
Great!!Rated 5 out of 5 4.77
by Stephen F. (verified owner)
Very nice upgrade. Snug fit (required some trimming) and sturdy construction.
(0) (0)