T3 Shotgun Stock

$119.99

Made in the USA

Clear
Compare

Fits: Mossberg 500/535/590/835 12ga & 20ga (proud fit), Maverivk 88 12ga & 20ga (proud fit), Remington 870/887/7400 12ga, Winchester SXP 12ga, FNH USA P-12 12ga, Most Savage Stevens 320 12ga before 2016, TriStar Raptor/Cobra 12ga, Charles Daley 301 Pump-Action Field Shotgun 12ga Shotguns  

 Note: Does Not Fit .410 Gauge Shotguns, Savage 320 Shotguns produced in 2016 or after with the new trigger guard (see picture).

For the Savage 320 Shotgun adapter 2017-current click here.

  • T3 Pistol Grip Shotgun Stock
  • Compact for Transport & Carry
  • Length of Pull: 13 1/8″ to 16 5/8″
  • TactLite 6-Position Adjustable Mil-Spec Stock
  • TracLOCK System
    • Provides Smooth Secure Stock Adjustments
    • Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
    • Eliminates the Need for Secondary Locking Mechanisms
    • Dual-Sided QD Attachment Point
    • No Snag Points
  • X Series Recoil Reducing Pistol Grip
    • Buil-In X Series Recoil Absorbing Backstrap
    • Slim Ergonomic Design
    • Sure-Grip Texture for Increase Control
  • X2 Recoil Reducing Butt-Pad
    • Upgraded 1 1/4″ Thick Pad
    • Recoil Impact is Absorbed
    • Reduces Muzzle Lift
    • Eliminates the Felt Punch of the Recoil
    • Shoot Any Load Size with No Pain Transfer to the Shooter
    • Not Affected by Chemicals or Extreme Temperatures
  • Slot for Tactical Sling Attachment
  • Adjustable/Removable Cheekrest
    • Elongated Design to Fit All Users
    • Cheekrest Provides ½” of Vertical Adjustment
  • Easy Installation
  • Universal Mount System
    • Securely Fasten your Tactical Stock with no Specialized Tools
    • Mounts Included for All Supported Models in One Package
    • All Mounting Hardware Included
  • Scratchproof & Weatherproof
  • DuPont® Extreme Reinforced Polymer
  • Limited Lifetime Warranty
  • Made in the USA

Instructions

PDFT3 Adjustable Shotgun Stock

Replacement for Related Part Numbers: B.1.10.1005, B.1.20.1005, B.1.40.1005, B.1.10.1140, B.1.20.1140, B.1.40.1140, B.1.10.1141, B.1.10.1141, B.1.40.1141
Also; A.1.10.1005, A.1.20.1005, A.1.40.1005, A.1.10.1140, A.1.20.1140, A.1.40.1140, A.1.10.1141, A.1.10.1141, A.1.40.1141

Share your thoughts!

4.85 out of 5 stars

296 review

What others are saying

  1. Joe Loffredo

    296

    by Joe Loffredo (verified owner)

    Great product. Many options and perfect fit!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Alex Aguilar

    RIA VRPA40 unsure but Fit!!
    296

    by Alex Aguilar (verified owner)

    I was really unsure if it was going to fit being my shotgun wasn’t a model listed. I figured it was dang close just the trigger assembly can be released on my shotgun and the grip doesn’t allow it on the fly. Other then that it’s really comfortable.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Chris Neely

    Post 2016 Savage 320 Security 12 Gauge
    296

    by Chris Neely (verified owner)

    This awesome state of the art drastically reduced the recoil of my 12 gauge. I am not a shotgun person, however the addition of this stock has improved my shotgun accuracy, handling, and physical appearance. Development took forever, but it appears to be worth it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Brandon S.

    Love it
    296

    by Brandon S. (verified owner)

    Feels great and looks even better. Easy to install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Jon E.

    I just wish it could
    296

    by Jon E. (verified owner)

    I just wish it could have had a metal buffer tube , other than that it is a great fitting product for my Stevens 320 20 ga , fit like a glove .

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Michael G.

    T3 Shotgun Stock FDE
    296

    by Michael G. (verified owner)

    Received my T3 stock for my Winchester SXP Defender in a timely manner. The stock was easy to install with simple instructions and tool list. The shotgun is very light and this helps reduce felt recoil quite a bit. Great purchase.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. Jonathon E.

    Used this kit for my Dickinson turkish shotgun
    296

    by Jonathon E. (verified owner)

    Great kit. I used this on a custom application for a Dickinson Turkish shotgun. I wanted the adjustable stock versus the fixed. Problem with buying a no name shotgun is that no one makes parts. But this did the trick. I also like the adjustable cheek rest. Comes with all screws and good directions. Oh, I also changed out the foregrip to one from an Escort Shotgun, if you are looking to mod yours as well. And don’t forget to change out your nasty plastic follower. Get a nice metal one. Fits standard universal types. Then stand back and marvel at your Frankenstein gun and wonder why you didn’t just spend the extra money and buy the Mosberg, lol.

    Cheers ^_^

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. Robert C.

    Satisfied
    296

    by Robert C. (verified owner)

    Outstanding product and customer service.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Brad D.

    Fit well looks great
    296

    by Brad D. (verified owner)

    Easy install and looks great. Added comfort and control. Would completely recommend

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Jason M.

    One flaw
    296

    by Jason M. (verified owner)

    Great stock, fits snug and easy to install on my Mossberg 590a. Took 1 star off because you have to remove the stock to take the firing mechanism out which involves removing the rubber grip, then removing the shoulder butt, then removing the pistol grip. They could have made this easier by attaching the shoulder butt with a top mounted screw.
    Overall I’m pretty happy with the quality and product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Brian O.

    Install on H&R Pardner
    296

    by Brian O. (verified owner)

    Installation was simple and straight forward. If you have basic tools and know how to use them, this is no more than ~30-40 install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Jacob P.

    Easy installation, comfortable, Rugged, durable,
    296

    by Jacob P. (verified owner)

    Easy installation, comfortable, Rugged, durable, and looks great. Very impressive product

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. Authur A.

    awesome
    296

    by Authur A. (verified owner)

    looks and feels great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. Juan V.

    Great product
    296

    by Juan V. (verified owner)

    At first I was sceptical about this product, I received it and it felt like cheap plastic made in a 3d printer. I purchased one 5 years ago and it was made from aluminum parts. Great quality. I have yet to shoot with the new version but will update my review when I do.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. Jurney Y.

    T3 Stock
    296

    by Jurney Y. (verified owner)

    Fast delivery, easy instructions, quality material. Thanks ATI!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. Nick

    T3 stock! Yeh buddy!
    296

    by Nick (verified owner)

    So glad I chose this stock for my Mossberg 500 20 gauge! To be honest, I’ve never installed one of these before and guess what, it was incredibly easy to do. Took me under 30 minutes to do. I already had all the tools I needed, so that worked out (hex key/wrench set of all sizes and a Philip’s head screw driver.) I had a little trouble with the strip of sticky tape that you use to get the behind trigger pad to work but no big deal, I had some command strips handy and that worked great. Overall, i had little trouble and lots of satisfaction when I converted my mossberg 500 20 gauge to the T3. If you are on the fence about whether to choose that cheap walmart “tactical” stock or this awesome T3 stock, TRUST ME, the T3 from ATI Tactical is very much worth the cost. The quality is like night and day. Wish I could post a photo on here. I love it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. Rena L.

    Stevens Savage 320
    296

    by Rena L. (verified owner)

    Fits great on my Savage (Older Model) no adjustments needed, it simply screws on where the original stock screws off…

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. Jose E.

    Overall a good product.
    296

    by Jose E. (verified owner)

    I haven’t had a chance to try it out in the field yet to test feel and rigidity under fire, but seems solid. I docked a star simply for the fact that I had to shave some plastic off the edges left from molding, as well as had to dig some out of the predrilled hole attaching the grip to the buffer tube so the square washer would fit in order to drive the screw. Otherwise a great looking upgrade to my sxp.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. Lionel G.

    Excellent product
    296

    by Lionel G. (verified owner)

    The pistol grip feels really good. It’s definitely a game changer and it comes with adapters for just about every 12g shotgun. I was hesitant but I’m super happy I bought it. The butt stock is the perfect length of pull when collapsed and the padding is really soft. I couldn’t be happier.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. John E.

    Good quality
    296

    by John E. (verified owner)

    Solid. Thanks.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. Benjamin L.

    Very good quality product but
    296

    by Benjamin L. (verified owner)

    Very good quality product but the instructions leave A LOT to be desired. More transparency needed prior to purchase about what tools are needed for installation and the instructioms themselves need to be more clear (screws and adapters are mostly not labeled).

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  22. Christopher J.

    Looks and works great.
    296

    by Christopher J. (verified owner)

    Looks and works great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  23. Gale S.

    Great American made product!
    296

    by Gale S. (verified owner)

    Looks great! Feels solid and works as promised. (it does take longer to install properly than advertised)
    Keep in mind that this comes from a mold and the different stock-to-handle parts that depend on the type of gun you own, compress and the stock bolt needs to line up perfectly as to not strip the threads.
    After careful installation, this product is exactly what i wanted for my shotgun.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  24. Felix R.

    First mod on shotgun
    296

    by Felix R. (verified owner)

    I bought this stock and forend since not too many are made for the Winchester SXP. Took some time to install because I couldn’t figure out bolt went on the end and which went on the pistol grip. Through trial and error I was able to figure out the best fit. Looks good but included picture directions could be a little better.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  25. James K.

    Outstanding stock ,highly recommend it,
    296

    by James K. (verified owner)

    Outstanding stock ,highly recommend it,

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  26. THOMAS M.

    Excellent product and customer service
    296

    by THOMAS M. (verified owner)

    Ordered a stock for a stevens that i inherited from old high school friend, i thought it was a 320. Well, i had it up at the cabin when i ordered stock and brought back only to have the stock, but it was a model 67. emailed cs and told them the issue, and just to send back, if not all torn apart from opening, anyway i opened it and i just knew it wasnt the right one so i just stopped, anyway, got my money back no problem!!! Thanks guys and will always go to you!!! Have a couple 1100s might get to work on.
    Cheers!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  27. Joshua S.

    Good stock
    296

    by Joshua S. (verified owner)

    Comfortable and easy to install

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  28. Anthony S.

    Well made, great fit and
    296

    by Anthony S. (verified owner)

    Well made, great fit and function! Much better than the factory stock, and tons of adjustability!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  29. Ryan U.

    Perfect fit for my 20 gauge Mossberg 500
    296

    by Ryan U. (verified owner)

    Easy to follow instructions and a perfect fit!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  30. robert m.

    Better than first imagined
    296

    by robert m. (verified owner)

    I purchased this stock for my Stevens 320 shotgun with the purpose of making look and feel more tactical. WOW, not only did it accomplish that goal, it became so much easier to maneuver and the padding for the recoil is awesome. I’m so hapoy that I made the change from the rifle stock with the pistol grip.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  31. Sean M.

    Awesome sxp
    296

    by Sean M. (verified owner)

    Shipping was fast, even for pandemic days.takes about 20 min. To put together if you lost the tiny hex keys.soaks up recoil on the everything, 2.75-3.5, bird shot ,water fowl shells, buck shot, andTurkey loads. Thanks for a great product!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  32. Johnny L.

    It was just as advertised
    296

    by Johnny L. (verified owner)

    It was just as advertised

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  33. William H.

    I like it and it
    296

    by William H. (verified owner)

    I like it and it works well. Installation instructions could have bigger and clearer pictures. The adapters for adapting the stock to the different brands and models of shotgun should be numbered, with the instructions saying what shotguns need what number of adapter. The pictures showed which adapter I needed for my Winchester SXP, but they aren’t clear enough. I had to sort through them and try fitting several. If they were numbered, this would have saved a lot of time. Otherwise, installation went pretty well.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  34. Nathan W.

    Spot on
    296

    by Nathan W. (verified owner)

    Solid, and not surprising – ATI does not mess around!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  35. Jeremiah E.

    Quality Stock
    296

    by Jeremiah E. (verified owner)

    Easy to install and a quality product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  36. Jeremy S.

    Great product
    296

    by Jeremy S. (verified owner)

    I installed this on my Winchester SXP camp and field. Install was very easy and it made a world of a difference. I wish it would let me upload photos. Only one issue I had was the little foam piece that abuts the trigger guard looks weird and I wish it was hard plastic. But this is a product for multiple shotguns and I do understand why it’s foam. Other than that it’s a great addition to my shotgun and I love it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  37. Jay V.

    Perfect fit. Feels great. Haven't
    296

    by Jay V. (verified owner)

    Perfect fit. Feels great. Haven’t had a chance to fire yet but can’t wait.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  38. Jeremy E.

    Looks and feels great!
    296

    by Jeremy E. (verified owner)

    Due to the Covid I have not been able to use it yet but it looks good and feels great!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  39. David F.

    Fits and functions perfectly.
    296

    by David F. (verified owner)

    Fits and functions perfectly.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  40. Daniel K.

    Great fit on a stevens
    296

    by Daniel K. (verified owner)

    Great fit on a stevens 320 super easy to install

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  41. Terrence G.

    Top Notch
    296

    by Terrence G. (verified owner)

    Impressive, sturdy construction with an excellent finish.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  42. Fred H.

    customer loved it
    296

    by Fred H. (verified owner)

    the stock was easy to assemble after I figured out the instructions were written for people that have no idea what they were doing. the instructions were very useful. the pictures told me all I needed to know. the words were useless. given the opportunity to buy again for a customer, I will in a heartbeat.. for my own shotguns.. never going to happen..

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  43. Herman G.

    T3 Shotgun stock.
    296

    by Herman G.

    T3 Shotgun stock. Bought it for the recoil pad, pistol grip and the adjustable stock. Got it installed on the Rem 870 with out any issues. Shot it 8 times with 3 inch buck shot. With the pistol grip I was able to pull it into my shoulder a little tighter and hold on to it better when I shot it. I think it reduced recoil a little but 3 inch buckshot still packs a punch. Over all I think I can handle the shotgun a little better with the T3 stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  44. Mike M.

    Great Service
    296

    by Mike M.

    Smooth order process. Rapid shipment, even considering the holiday timeframe.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  45. Rebecca M.

    Great deal
    296

    by Rebecca M.

    This was a great deal and makes it easier to shoot with my short arms.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  46. William M.

    Good stuff!!!!!
    296

    by William M.

    Satisfied with my purchase.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  47. Anthony C.

    T3 stovk
    296

    by Anthony C.

    I had a little trouble. Call got help all in less then 5 minutes.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  48. Jeff W.

    Great stock!
    296

    by Jeff W.

    I purchased this stock based on previous reviews, because of recoil. My current tactical stock wasn’t getting it done. The other “like” is the length of the extension…perfect! The cheek rest is a nice addition too!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  49. Joseph R.

    Works great with 870 DM
    296

    by Joseph R.

    Fits very well and creates great tactical combo with magazine fed Remington 870 DM.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  50. Christopher H.

    Great product
    296

    by Christopher H.

    Great product. Love the quality and attachments

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  51. Daniel O.

    Awesome stock
    296

    by Daniel O.

    Awesome stock

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  52. J C.

    Absolutely perfect!
    296

    by J C.

    100 percent happy with it. Perfect fit and perfect feel 5 star all the way. :�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½:

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  53. John H.

    With minimal filing it fit
    296

    by John H.

    With minimal filing it fit my 870 20 gauge perfectly. Great solid adjustable stock!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  54. Christian

    Great stock
    296

    by Christian

    I was worried about the price being worth it. But after shooting with it a lot, it was worth the buy. Very comfortable and looks great on my mossberg 500.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  55. Zoltan P.

    Excellent,fast service Thanks
    296

    by Zoltan P.

    Excellent,fast service
    Thanks

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  56. Jason C.

    Remington 887
    296

    by Jason C.

    This stock is perfect for upgrading the Remington 887 nitro mag

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  57. James V.

    Well Made Stock
    296

    by James V.

    The stock is really good quality. All parts fit well and easy to install. Took me less than 15 minutes to install on my Mossberg 500 tactical shotgun.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  58. Roberto C.

    Great stock
    296

    by Roberto C.

    Very satisfied with the product. Well built, good price, easy installation.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  59. One person found this helpful
    Larry A.

    T3
    296

    by Larry A.

    Very nice product, was installing on Winchester SXP fit well. ATI was very nice to work with. Good Company
    I returned the T3 because I was looking for a 12.75″ LOP and the T3 was 13.125″. I had 2 additional issues:
    1. you can not remove the trigger assemble with the stock installed, the pistol grip prevents the trigger assembly form moving to the rear.
    2. The Pistol grip makes it difficult to access the bolt release.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  60. Patrick M.

    Excellent upgrade
    296

    by Patrick M.

    Purchased this stock for several reasons. Well made, came highly recommended! Easy install and fit as expected. Loved shooting my shot gun and wanted to make it more comfortable. The adjustable stock works great, I added the side saddle also. The pistol grip works great for more control. Excellent upgrade for my home defense shot gun!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  61. Maksim M.

    A Customer Service
    296

    by Maksim M.

    I could not be happier with the customer service at ATI and the quick email responses that Troy provides. I ran into a little issue and Troy was able to help me resolve it quickly. The stock is by far a 100x more comfortable then the stock one, most importantly it feels that you have better control of the gun. Thank you guys once again! Will be back for future purchases.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  62. Guest

    Awesome ad on.
    296

    by Guest

    I like the style and fit of the stock compared to the factory.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  63. Guest

    Stock
    296

    by Guest

    Badas* stock!! Best one out there !

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  64. Guest

    good product
    296

    by Guest

    i love the stock but my only issue was two small screws were not inside the packaging. one is to hold the stock adapter and the other under the psitol grip.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  65. Meridith B.

    Amazing
    296

    by Meridith B.

    Fit my SXP Defender with no issues and feels very well made. The stock is beautiful and easy to operate. Easily extended and shortened for user comfort. I�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��m a 5ft tall woman with short arms and at the shortest length this is much easier for me to hold than the original stock my shotgun came with. Between this and the pistol grip forend (also purchased through ATI with amazing customer service) I am ready for the zombie apocalypse!!! Pew pew!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  66. 05on20s

    Feels really good!
    296

    by 05on20s

    I haven’t had the opportunity to shoot it yet but it feels like it should be much comfortable and I should be able to control the gun better. Looking forward to taking it to the gun range!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  67. David W.

    Perfect fit
    296

    by David W.

    This stock fit perfectly on my mossberg 835.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  68. Alexander S.

    GREAT
    296

    by Alexander S.

    I LOVE THIS STOCK. ALLOWS FOR EVEN MY WIFE TO SHOOT THE SHOTGUN

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  69. John S.

    CZ 712
    296

    by John S.

    This �ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��universal�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�� kit contains the necessary adapter for the CZ-712.
    Need to configure a metric stud and nut adaptation to replace the long bolt that goes thru the original stock�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��pay attention to the way things disassemble for re-assembly. May need to replace some of the small attachment screws.
    Otherwise a great kit :�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½::skin-tone-2:

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  70. Derrick S.

    Nice product easy install
    296

    by Derrick S.

    Nice product easy install

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  71. Kent C.

    T3 Shotgun Stock
    296

    by Kent C.

    Stock fit perfect on the Mossberg 500. Easy install with all necessary parts included. Perfect application for a home defense shotgun.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  72. Kenneth B.

    Adj. Stock for shotgun
    296

    by Kenneth B.

    Not as easy to install as I thought to install, just took a little bit longer, nice piece though.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  73. Samuel C.

    As described
    296

    by Samuel C.

    Fits like a glove. Only draw back it makes the shotgun noticeably heavier.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  74. Frank G.

    Shotgun stock
    296

    by Frank G.

    It’s an all around good product. Easy to assemble. I was a little disappointed that it didn’t adjust down a little bit more, but a good product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  75. Gerardo C.

    Great stock
    296

    by Gerardo C.

    Fit perfectly on a 870 Remington

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  76. Michael E.

    Well made
    296

    by Michael E.

    Perfect fit for Mossberg 500. Very well constructed would highly recommend.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  77. Christopher P.

    Great stock
    296

    by Christopher P.

    Receives stock and the tube was mis drilled. Contacted ATI and Troy immediately sent out another tube no questions asked. Great company, great customer service. Second purchase. Will buy here again

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  78. Guest

    Great Stock
    296

    by Guest

    Very good stock, it is well made.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  79. Brian

    Awesome customer service
    296

    by Brian

    I had a great experience with this company regarding a customer service issue. The representative went above and beyond to solve my issue. I will definitely use ATI and their products in the future! Thank you for the level of customer service rarely enjoyed these days.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  80. Guest

    Perfect fit, easy install on
    296

    by Guest

    Perfect fit, easy install on Mossberg 835

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  81. Guest

    Works well, after a little tweaking
    296

    by Guest

    This item works very well on my Remington 870 Express, and I’m happy with it. The roll pin on the stock lock lever wasn’t pressed in properly, so the lever popped loose the first time I pressed it. After disassembling the lock and putting everything back together properly, everything is good now. Comfortable, nice grip, and nice butt pad as well. Overall I’m happy now. This was one of several mods I did to this shotgun, and it worked well with everything else I installed.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  82. Clay D.

    Stock and foregrip
    296

    by Clay D.

    Fast shipping easy to put together and looks great. Only thing I had to do is trim a little off the adapter for the foregrip looks great very happy

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  83. Kevin H.

    As advertised
    296

    by Kevin H.

    Good instructions easy to follow fit exceeded my expectations

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  84. Greg J.

    Good to go - Recommend it
    296

    by Greg J.

    Purchased to mount on my Remington 870. Easy to install, tolerances are tight on stock…..no rattling, creaking, etc. It fits perfectly flush to the weapon. Solid quality and performance, especially for the price point.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  85. Mailena M.

    Shotgun Stock
    296

    by Mailena M.

    Looks great. Like that it’s adjustable as well.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  86. Yolanda F.

    Works exactly as advertised
    296

    by Yolanda F.

    There�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��s no questioning the quality of this product, I have it for the Mossberg 500 and it works just as you expect it to.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  87. Guest

    I bought it for a
    296

    by Guest

    I bought it for a gift and they seemed very happy with it

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  88. Robert D.

    Excellent customer service
    296

    by Robert D.

    My order didn�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t arrive and ATI sent me a new stock and side-saddle

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  89. Guest

    Top notch hardware and service
    296

    by Guest

    I’ve always been impressed with ATI’s design and construction. I have stocks now for both a Mossy and a Winchester SXP. Better yet, they have a handle on something that is woefully missing these days: customer service. Had a SLIGHT problem with a recent purchase. Sent an email and received an almost IMMEDIATE response. After a brief exchange and without hesitation, a new stocked was shipped to us with zero hassle, zero charge, and 100% professionalism. I’m not just satisfied, I’m in awe.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  90. John T.

    ATI T3 SHOTGUN STOCK
    296

    by John T.

    I purchased this stock for my 870 12 gauge super mag express due to arthritis in my right hand. This is an excellent addition to this weapon. The gun shoulders nicely with no drag and my sight picture comes up level to the bead with no issues. While I haven’t put my 3 1/2 inch # 4 turkey loads through it yet, high brass 2 3/4 #4’s feel like I’m shooting a .410.
    I highly recommend this stock , it is comfortable and a pleasure to shoot with.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  91. Neil D.

    T3 Shotgun Stock
    296

    by Neil D.

    Installed this on a Winchester SXP Defender in FDE finish. Very pleased overall with the stock. Stock finish is a perfect match for the frame. Installation only took a few minutes once the original factory stock was removed. Fit was clean with no gaps. Looks great and fits the hand and shoulder well. Keep a full set of Allen wrenches handy while doing the install, some of the hardware supplied with the kit was a different size than what the instructions stated.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  92. Max S.

    Excellent buy
    296

    by Max S.

    Replaced my wood stock with this, and it is a great fit. The grip is nice, extendable stock to fit whatever arm reach you’d like – its hard to go wrong with this. I went into this having never removed/installed a stock, but the instructions were clear and well written.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  93. Guest

    Proud Fit?
    296

    by Guest

    Installed the stock on a Remington 887 Tactical…. the fit around the trigger guard is nothing to write home about, and the adapter to bolt the stock to the gun relies almost entirely on the bolt to hold it in the proper location….other than that it works as advertised.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  94. Darius M.

    Amazing quality stock, materials do
    296

    by Darius M.

    Amazing quality stock, materials do not feel cheap at all, however the instructions for the FNH P-12 were unclear.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  95. Brian S.

    Comfortable!
    296

    by Brian S.

    Put this on a Remington 887 Nitromag tactical for my youngest son. He loves it. It really made thegun super comfortable for him. He can shoot targets all day with it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  96. Michael H.

    Shotgun Stock Install
    296

    by Michael H.

    I do like the stock very much first statement for my Mossberg 500 12 GA. There are a few drawbacks that should be mentioned. First the adaptor that was needed to connect the new stock to the gun is not a precise fit and I needed to sand areas in very hard to reach areas that added a lot of time to this install. If I had a Dremel that would have certainly made it easier to make the necessary adjustments and saved time. Once the stock was installed we test fired the gun and we had to remove the adjustable cheek rest. The stock has a higher position than the original wood stock forcing you to really be down on the stock to make an accurate shot. With the position of where the handle is on the new stock installed on the gun, in order to strip the gun to clean it the handle on the new stock needs to be uninstalled to drop the trigger assembly from the shot gun. This will add a lot more time to cleaning. Positives are a very comfortable grip and I really enjoy the adjustable stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  97. Steven

    ATI T3
    296

    by Steven

    I bought this stock for an 870 build. The stock is very easy to install as per the instructions, using good quality, basic hand tools. The stock can be adjusted for various lengths of pull, and the butt pad is generous. Overall- a great addition to any of the shotguns listed in the fitment list.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  98. Guest

    As-20 stock
    296

    by Guest

    Went on like a breeze. Looks great. Feels great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  99. Albert G.

    Perfect!!
    296

    by Albert G.

    Perfect!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  100. Shawn

    Excellent Customer Service!!!!
    296

    by Shawn

    I had an issue with a stock installed at a gun shop. I contacted atioutdoors with the issue and they were on it right away. They went above and beyond for me to help get the issue resolved. It was much appreciated. The stock is great. I highly recommend ATI. I was very impressed with their customer service. Thanks guys!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  101. Michael M.

    I'd buy it again
    296

    by Michael M.

    This T3 replaced an older (circa 80s/90s) ATI tac stock on a Mossberg. The upgrade was easy to perform (i.e. everything fit fine using minimal tools for the minimal # of parts). The thicker butt pad is welcome, as is the adjustability and tightness of fit (very little wobble). Also, I purchased a set of QD sling mounts with the stock so I could move my sling to the more pleasing location in the built-in QD holes.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  102. John M.

    Nice upgrade
    296

    by John M.

    Will be a nice upgrade for my 870 Tactical shotgun.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  103. Mitchell C.

    Great so far
    296

    by Mitchell C.

    Feels good look forward to using it next hunting season

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  104. Robert M.

    Great stock
    296

    by Robert M.

    Fit my SXP perfectly and looks awesome.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  105. James S.

    T-3 shotgun stock and pistol grip
    296

    by James S.

    Very simply, the felt recoil with the T-3 versus the traditional stock the shotgun came with was SIGNIFICANT, significantly less that is! The shotgun I am referring to is the Mossberg Maverick 88 tactical home defense version with an 18.5′ barrel. I am very pleased since aside from practicing shooting it, the gun is for home defense and with the less felt recoil, it is more appealing for HD.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  106. Guest

    A great addition
    296

    by Guest

    This stock is awesome and is very comfortable when firing. Strong and durable. Thanks ATI

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  107. Nick P.

    Great product and service!
    296

    by Nick P.

    The recent purchase I made had a problem with my address not being on the order form. I was contacted very quickly about the error and it was quickly fixed and shipped. They were very helpful and product was delivered quickly and looks great! I’m very pleased and will be making more purchases in the future.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  108. Dave C.

    Quality
    296

    by Dave C.

    Perfect fit, easy install, exactly as described.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  109. Reed F.

    Easy to use and durable!
    296

    by Reed F.

    My package was delivered ahead of schedule! The directions were clear and easy to follow! Very happy with the quality of product for the price!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  110. Chuck S.

    12 or 20 gauge?
    296

    by Chuck S.

    Ok. I bought this stock because the website said it would fit my Mossberg 500 20 gauge. When it arrived, NOTHING on the box said ANYTHING ABOUT a 20 gauge. It DID SAY IT WOULD FIT A 12 gauge. I went back to the website to double check my info. Sure enough, same part number was claimed to fit the 20. So, I opened the box and installed it. It�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��s a little larger than the rear of the receiver where it bolts on, but not too bad. So I�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��m keeping it. Overall good stuff, just wish they would provide better information on what it will and won�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t fit.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  111. Jason V.

    Awesome
    296

    by Jason V.

    Very nice stock and grip…..easy to install…..worth the money

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  112. jason b.

    ATI Talon 3 stock for the Mossberg 500 platform
    296

    by jason b.

    The stock was ordered and received in a blink. It was a sinch to install and the fitment looks great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  113. Steven T.

    870 20 gauge
    296

    by Steven T.

    Nice stock had to modify alittle for safety and mounting to gun but worth it

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  114. Joshua L.

    Remington pistol grip
    296

    by Joshua L.

    Great item, fun to shoot.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  115. Douglas O.

    T3 shotgun stock Stevens 320
    296

    by Douglas O.

    I gave it a 4 because I did not use it but sold the shotgun to a friend. For the most part it was not hard to assemble and quality was good. The length adjustments fit good for all sized. The QD adapters are in a good spot also she’ll carrier…nothing negative to say for the price. Friend loved it…..

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  116. Rynkra

    Looks Great
    296

    by Rynkra

    I haven’t had a chance to go shooting yet since I installed this. It installed easy and looks great though.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  117. Larry S.

    Good product for the price.
    296

    by Larry S.

    Fits well on my Winchester SXP Defender. Fairly easy to install and adjusts nicely.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  118. Matt C.

    Mossberg 500 persuader easy install.
    296

    by Matt C.

    Mossberg 500 persuader easy install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  119. William W.

    Excellent
    296

    by William W.

    Great product, easy install! Looks professional!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  120. Guest

    nice end result
    296

    by Guest

    but… much difficulty fitting the 20g. adapter to my rem. express youth 20g. l finally realized that adapter needed some material removal at the crossbolt safety to snug it up all the way.Not a big deal to correct, just took a while to finally figure that out…it all fit well in the end, nice design and ergonomics.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  121. Guest

    Well made stock! 870 fit questionable.
    296

    by Guest

    I ordered the stock being a little bit skeptical of ATI. Previously I have used their folding stocks, and frankly I’ve never been impressed with the feel. When the T3 came out it looked pretty amazing, and after reading some reviews I went ahead and ordered it. I have to say I’m very impressed with the design! Fantastic fit and finish, and very well made! Also something may be worth noting because I couldn’t find any information on it when I ordered, is that the ATI Flat Dark Earth color is very close to Magpul’s. It is not exactly the same, but I already had the Magpul forend on my gun and I was worried that the Flat Dark Earth would clash. It does not. My initial kit was short the adapter I needed to put the stock on my Remington 870. I contacted customer service and they had one shipped out to me the next morning free of charge. They were quick to help me, then very friendly! Nothing bad to say about them. My one complaint with the stock would be the way it fits the 870. It is listed as a proud fit, and I realized it probably wasn’t going to be perfect, but with the adapter I expected it to fit snug and smooth. It feels secure, and I have no concerns about it coming off, but there is a ledge. It’s very similar to what they picture on a 20 gauge shotgun, it’s just a little too wide for the 870 receiver. Since it is probably one of the most common shotguns in the world, I would have liked the adapter to have been narrowed down to fit it perfectly. Outside of that I am loving the stock so far!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  122. Jorge B.

    ATI STOCK FOR MOSSLER SCORPION
    296

    by Jorge B.

    The very best..

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  123. Jason D.

    Adjustable LOP, Great quality, Excellent Customer service, USA made.
    296

    by Jason D.

    Being comfortable with the AR15 platform, and being a first time owner of a shotgun my search landed me to the ATI T3 stock. The adjustable stock and pistol grip, as well as large recoil pad is exactly what I was looking for!

    The installation was straight forward and the excellent build quality definitely shows. I did however have a couple of minor issues. First the Allen screw that fastens to the buffer tube not attaching securely. Second there was a bit of excess rubber in the grip not allowing the grip cover to close completely. Removing a small portion of the excess rubber was an easy fix with some pliers. As far as the Allen bolt, ATI made things right and will be sending a new bolt, not sure however if this will correct the issue.

    I would highly recommend this stock, however did have to knock off one star due to the previous issues mentioned.

    If you find that you are unable to hit the action release lever once converting your standard stock to the pistol variety, I recommend taking a look at the extended action release lever from SHOTEN Armory. This lever works perfectly with this stock. No modification necessary to the grip, and quick access to the action release.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  124. Matthew L.

    Works great
    296

    by Matthew L.

    Fit my tristar 20 gauge perfect

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  125. John C.

    887 tactical
    296

    by John C.

    Great product and a great price very happy

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  126. Steven W.

    Replacement stock
    296

    by Steven W.

    Awesome quality and price! Made a world of difference to my Stevens 320 shotgun. Parts fit perfectly and easy to mount. Thanks ATI

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  127. Guest

    Quality Product
    296

    by Guest

    Purchased this for my Moss 500, the quality is great and seems to be rugged enough for any task you might encounter.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  128. Ely A.

    Great product
    296

    by Ely A.

    Really easy to put together!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  129. Ray S.

    T 3 shotgun stock
    296

    by Ray S.

    “really love” it had to modify a little with Dremel tool for Savage 320 with improved trigger guard made after 2016. install was easy

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  130. Hubert W.

    Looks good seems to be
    296

    by Hubert W.

    Looks good seems to be well built

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  131. Kyle H.

    Mossberg 500 Stock
    296

    by Kyle H.

    Fits and looks great on my Mossy 500. Fast shipping and installation was easy to follow with the included instructions

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  132. Doubleoh D.

    2017 savage / stevens 320 20ga install successful.
    296

    by Doubleoh D.

    dremel modificafion to the pistol grip added 25 minutes to the 15 minute install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  133. Billy B.

    Descent setup , have to
    296

    by Billy B.

    Descent setup , have to buy a QD sling adapter for it . Instructions a little ify but workable. Available in different colors is a plus , overall good setup.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  134. Dustin O.

    T3 pistol grip shotgun stock
    296

    by Dustin O.

    I bought this for a Mossberg 590a1. Absolutely great feel and great fit-I was pleasantly surprised with the quality and fit of this. The stock positions have very nice and firm clicks. I was never really a fan of pistol grip shotguns until I bought this and for the price you can�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t beat it for what you�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��re getting. I have a lot of other manufacturer after market parts on my shotgun and none of them were interfered with.i was originally concerned before purchasing about being able to work the action (as stated in some videos on YouTube) but that is just not the case. Customer service guy I spoke to was extremely nice and knowledgeable. The only thing I didn�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t like were the directions and pictures they give you but if you have any sort of intelligence you can figure it out. You have to remember, they are sending you all kinds of little parts that fit different shotgun manufacturer so I can understand. Overall, an excellent product that I will recommend to anyone needing a shorter length of pull or upgrade a home defense shotgun or whatever.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  135. James M.

    Great stock
    296

    by James M.

    This tactical stock was purchased for my Mossberg 500 Mariner. It fits well and the directions were good. With me everything starts at a 5 and comes down from there and I’m giving it a 4. It’s made to fit a bunch of guns and I feel like the fit and finish by the trigger guard of the Mossberg 500 could be cleaner. There’s a piece of foam that’s supposed to fill a gap but it doesn’t really. Also the kit was missing a screw that I had to buy from a local specialty hardware place. I’m sure ATI would have sent me one right away but who wants to wait. Also an Allen wrench was mentioned in the instructions but wasn’t included. Over all it’s a nice stock and I would recommend it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  136. Joshua S.

    Great stock! Easy to install,
    296

    by Joshua S.

    Great stock! Easy to install, looks great and tuff!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  137. Jason K.

    Perfect
    296

    by Jason K.

    Great stock, fit and finish are perfect. Got it in destoryer grey.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  138. William Hennessy

    Great pistol grip adjustable stock!
    296

    by William Hennessy

    This is a great pistol grip adjustable stock. I used the T3 stock to replace the ATI 6 position adjustable stock that came with my Mossberg 500 Tactical Persuader. I liked the older stock but the T3 is definitely an improvement for a fewer reasons. The pistol grip is thicker and more comfortable especially due to the cushion of backstrap. The thicker buttpad handles recoil much better. The adjustable cheekrest is also a nice feature. If you are looking for an adjustable pistol grip stock, I highly recommend the T3.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  139. Mark T.

    Great quality
    296

    by Mark T.

    Great quality product. Fast delivery. Highly recommended to take your Maverick 88 to the next level!!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  140. Mike

    Pistol grip stop
    296

    by Mike

    Fit perfect, shotgun shoots much better and is more comfortable

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  141. Forrest W.

    Great Product!!
    296

    by Forrest W.

    Great addition to my weapon; in both form and function.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  142. Robert

    Excellent stock, easy to install!
    296

    by Robert

    Installed on my Stevens 320 in about 20 minutes. Instructions were clear and it was very easy. Shot quite a few slugs shortly after and it held up quite well so far! Adjusting the stock was very easy while at the range.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  143. Aaron K.

    Great stock!
    296

    by Aaron K.

    Great product and was easy to install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  144. Kevin B.

    Ati stock is great
    296

    by Kevin B.

    The ATI stock is great, I would recommend it. All hardware is quality. Get the tactical strap and adaptor.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  145. Robert K.

    Perfect on Mossberg
    296

    by Robert K.

    Easy with simple hand tools

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  146. Franco J.

    T3 is a one of a kind
    296

    by Franco J.

    Bought this to make my shooting more comfortable and god it was more comfortable. Was shooting on a regular 88 stock and the recoil on the shotgun made my body hurt. This T3 really did help alot

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  147. Josh

    Perfect for Tristar Raptor
    296

    by Josh

    This stock was perfect for the Tristar Raptor auto loader tactical shotgun. It comes with lots of different adapters to fit multiple other shotguns. The cheek riser could have been designed with slightly more range of motion but is seems sufficient. I also like the ambidextrous attachment for a QD single point tac sling. The whole thing feels sufficiently built but some of the injection molding could be a little cleaner, nothing a little sand paper won’t fix.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  148. Stan L.

    Great Stock
    296

    by Stan L.

    I put the T3 stock on my Remington 887 and on my Mossberg 590A1. The stocks fit great, and look fantastic. I would recomend the ATI T3 stock it is well worth the money.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  149. Antonio R.

    Stock
    296

    by Antonio R.

    Really nice buttstock

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  150. Yancey L.

    Great product
    296

    by Yancey L.

    Would buy again.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  151. Nancy F.

    Buffer tube nut depth.
    296

    by Nancy F.

    Haven’t had a chance to run the shotgun yet but looks good and shortens length of pull. Only problem was next to last step the depth of the square nut hole was alittle off. Had to scrap some of material out to get perfect alignment.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  152. Nicholas Y.

    I like my new stock.
    296

    by Nicholas Y.

    Bought it for my Maverick 88. Great product, great price, what else to say.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  153. Dezi M.

    Super awesome stock�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��! Not so
    296

    by Dezi M.

    Super awesome stock�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��! Not so excited about the shotgun heat shield

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  154. Mark A.

    replacement for ati pistol grip on mossberg
    296

    by Mark A.

    I recently bought a shotgun equipped with ati hardware including a pistol grip. as I am physically unable to fire the weapon with pistol grip I decided to replace it with a T3 shotgun stock.
    It was fairly simple to replace the pistol grip with the T3 stock – with the new stock on my shotgun I am physically able to use it now. this is a great product and highly recommend it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  155. Kyle

    Awesome quality built stock
    296

    by Kyle

    Recently purchased this stock for my Remington 887. This is the only stock for the 887 that is 1 fit without additional modification. The quality is awesome and what makes it even better is that it is built in the USA. It’s very easy to install. If you own a 887 this is a must have. I have a 887 in the 28in barrel and with the factory fixed stock it is quite long for me but after I swapped it out with the ATI T3 it’s 100x better and much more comfortable to hold and shoulder. I can compare the pistol grip to that of my magpul moe grip on my ar its very comfortable and allows a tight grip. The buttpad is 3x thicker than stock so I can definately say that I won’t get shooting shoulder with this shotgun again. I haven’t taken it out to test yet but I have no worries on its performance just by holding it. Can’t wait to take it out! Will definately be buying more ati stocks for my future shotguns.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  156. Antonio C.

    Perfect fit and easy to mount
    296

    by Antonio C.

    This stock looks and feels great. Perfect fit for my 887

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  157. Daryl G.

    Arthritic Hands
    296

    by Daryl G.

    I’m finding it’s getting harder to grip long guns with the standard wood stocks due to arthritis. When I shoulder the gun my wrist can’t bend enough to pull the trigger with my index finger and I’m forced to use the middle finger instead, a little harder to due.
    The AR platform works really well for me allowing me to hold and fire the gun easier. That is why I chose to go with the “T3 Shotgun Stock” from ATI Outdoors! Works and function well for me. It’s really easy to install, it works like a AR stock, easy to adjust length of pull and it looks “COOL”!
    I have a Moseberg 500 20ga and although it says in the description for 12ga and it will not fit the 20ga, I ask them if they have a stock that will fit my gun and they were really quick to respond back and said the T3 will fit, but, it will over hang the receiver by a small amount.
    I ordered it anyway and took a chance. I’m glad I did, the amount of over hang, at the most is about an 1/8th, function over form works for me and my arthritic hands. It’s an investment worth while for me and I am very happy with my purchase and if anyone else is thinking about a AR style stock I’m sure you will be too.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  158. Paul L.

    ATI T3
    296

    by Paul L.

    ATI T3

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  159. Robert B.

    T3 Shotgun Stock
    296

    by Robert B.

    Love the look and feel on my Remington 887 Nitro Mag. I would suggest that the adapters for each individual shotgun provided be labeled. The one dimensional black and white instruction sheet made it difficult to tell which was the correct one. Two of the adapters appeared to fit, and in fact both did but one closer to the stock than the other. Other than that, the fit, finish and feel are great. Haven’t taken it to the range yet but that will be coming up this weekend. Happy with my purchase.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  160. Stanley

    Fit and Finish
    296

    by Stanley

    Have only used it a few times, but I shoot with my girlfriend and adjust the stock in and out to adjust for our size difference. It’s stiff to move in and out, so you need to make sure it’s locked in before you shoot. Second issue is the key or guide on the bottom of adjustment tube to keep the stock from twisting has sharp edges and cuts your hand when trying to adjust it. (Because it’s stiff). So you will have to de burr it to eliminate getting cut. Other than that it looks and feels great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  161. Richard M.

    ATI T3 shotgun stock
    296

    by Richard M.

    Love this stock it looks great and very sturdy

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  162. Cory F.

    Great stock!
    296

    by Cory F.

    This is a great grip and stock for a good price! If you own a a shotgun that this stock is compatable with, get it!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  163. Terrance N.

    Turned my Tristar Raptor into a tactical beast!
    296

    by Terrance N.

    I really love this stock. The fit and finish is perfect. Handles recoil much better than it did with the old stock. Also have the AR-15 grip on my rifle. We’ll be buying more.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  164. Guillermo L.

    Looks great and works great
    296

    by Guillermo L.

    Looks great and works great too. Feels good on my shoulder and adjust bery well. Bery happy with this product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  165. Justin H.

    T3 Shotgun Stock
    296

    by Justin H.

    Easy to install on my 887 Nitro Mag.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  166. Jordan L.

    Great product. Worth the money. (HR pardner)
    296

    by Jordan L.

    I put this stock on my hr pardner. No mods needed. Works great. Looks great. Reduces recoil significantly.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  167. Kevin S.

    Awesome Product
    296

    by Kevin S.

    This was exactly as described. Was able to mount it without any problems. Everything you need ia included. I would definitely recommend.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  168. Brock W.

    Fits newer CZ 712 Utility!
    296

    by Brock W.

    Was told it didn’t fit the cz 712, but the adapters looked like they should. Took a chance and the Tristar adapter fits perfect! Only mod I did was trim maybe 3/16 off the bolt that holds it on, then it tightened down nice and snug. If ATI would include an additional bolt of possibly a slightly shorter one then there’s no reason it could fit the CZ line.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  169. Michael J.

    T3 shot gun stock
    296

    by Michael J.

    Love it, extremely easy to install on my Mossberg 535 shot gun. Love the feel when in shooting position. I can’t wait to get out in the field and do some predator hunting.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  170. Dana D.

    Nice Collapsible Stock for FN Shotgun
    296

    by Dana D.

    This collapsible stock for the FNH P-12 is nice. I bought it as a present for my wife. Once installed I really love the way it makes the shotgun look and feel. I haven’t shot it yet because my wife’s birthday isn’t until the end of the month. I would definitly recommend this product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  171. Terry

    Good stock--hardware not complete
    296

    by Terry

    The kit comes with plenty of attachment options for different guns, but the screws that come with the stock wasn’t complete. I had to make a trip to Lowe’s hardware store to get the required screws.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  172. Greg C.

    The ATI T3 stock will fit a Linberta shotgun
    296

    by Greg C.

    My first review I had misspelled manufacturer. If you have a Linberta semi auto shotgun 01LSTAC 12 gauge shotgun. This ATI T3 shotgun stock will fit perfect and will have an amazing difference in Recoil ,comfort ,adjustability. And looks great .I was actually impressed of the quality and the fit. Love this product also if you’d like to add a 3 round ATI extension you will have no problem. Thanks ATI for a great product..

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  173. Greg C.

    ATI T3 stock will fit liberta shotguns
    296

    by Greg C.

    If you have on Linderta 01LSTAC 12G shotgun. This ATI T3 shotgun stock will fit perfect and will have an amazing difference in Recoil, comfort, adjustabilit. And looks great. I was actually impressed of the quality and the fit love this product . Also if you would like to add three more rounds the ATI Mag extension will also fit perfect thanks ATI for a great product

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  174. Ko O.

    A STOCK
    296

    by Ko O.

    Tri Star Tactical Cobra:
    Liteweight, the LOP feels great collasped, exceptional feel on the pistol grip…

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  175. Greg C.

    T3 shotgun stocks
    296

    by Greg C.

    I

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  176. Morgan M.

    Great stock. Need updated version
    296

    by Morgan M.

    Great accessory to your shotgun. Just didnt fit my model because of the updated trigger on mine. Great product. Will be waiting for new designs and products!!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  177. Mark L.

    Nice product
    296

    by Mark L.

    Product seems to be working well after taking it to the range twice definitely feel less recoil. The provided instruction are a bit lacking especially when directing you on which screw or washer you’re supposed to use, in addition the paper would say one size of hex key was needed for the screw but when using that key it was almost always too big for the head.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  178. James H.

    T-3
    296

    by James H.

    Thanks for such a great product. I think you sell yourselves a little short in your applications. I was able to easily adapt the t-3 to my fianc�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�:copyright:’ Winchester 1400 20ga shotgun!
    Thanks
    Jim Hedrick

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  179. Angel O.

    T3 Shotgun Stock
    296

    by Angel O.

    Love this stock, easy install. Looks great on my Remington 870 tactical.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  180. Christopher C.

    T3 Tactlite - good....but
    296

    by Christopher C.

    Overall satisfied with the stock, however, ATI does not include any small hex head tools to install, just a pet peeve that they could have spent a little money to make it easier to install. Also the foam next to the trigger guard didn’t fit and I ended up hacking it up but it looks ok

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  181. Alberto S.

    T3 Shotgun Stock
    296

    by Alberto S.

    Ordered the T3 shotgun stock for my Remington 870, right out of the box was impressed. Installation was fairly straightforward; although, could have been slightly more detailed. Overall, installation took less than 30 min. Did have an issue with attaching QD sling to stock & not being able to retain in place, but a quick email and phone call to ATI took care of that. Was sent a replacement stock within 3 days and everything works as expected. Have not taken her out to the range, but don’t foresee any issues.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  182. Craig T.

    Craig T
    296

    by Craig T.

    Quick delivery. Easy install. Looks sharp. Carries great. Now to the range to see how it shoots with the new T3 stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  183. Andrew L.

    Pretty Good
    296

    by Andrew L.

    I purchased this as a replacement for a Blackhawk stock on a Hawk 982 (Chinese clone of 870). It is lighter than the Blackhawk, and extends to a much longer length of pull. The downside is what is shown in the standard photo is as short as it will go, which is barely shorter than a standard LOP. With soft armor, it is just barely short enough (I’m 506).

    The recoil pad is pretty soft, but I did not notice a huge recoil difference. The pad on the back of the pistol grip is a HUGE difference and is a lot more comfortable.

    It was easyish to put on(I am an 870 armorer). There is an unusual gap at the back of the trigger guard that you put this piece of stick on weatherstripping into. Kind of cheap looking, but not noticeable when firing.

    For a work shotgun (LE, Military, contractor) go with something else. Home defense, occasional shooter it is fine. Would not go “downrange” with it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  184. Khalid M.

    Very nice upgrade for my
    296

    by Khalid M.

    Very nice upgrade for my 870. Shipped with all the attachments necessary. Order was shipped promptly after submitted. Thank you ATI!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  185. Matthew A.

    Great quality and easy install.
    296

    by Matthew A.

    Could not be happier with the product. Had to make a return on another product and ATI customer service was painless. Thank you!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  186. Nathaniel W.

    Awesome stock!
    296

    by Nathaniel W.

    I read that the T3 would fit my new FN P-12 shotgun, and it did more! Lowered the recoil significantly, and the pistol grip lines up perfectly! Like it was made for the rifle. The cheek guard also improves the accuracy and stability. Overall, best customization I’ve done on a firearm.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  187. Robert P.

    Great
    296

    by Robert P.

    Good stock. Easy install. Fast shipping.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  188. john h.

    Tristar raptor Atac.
    296

    by john h.

    Put it on my raptor atac. And the fit and function was perfect. I highly recommend this stock because you can adjust the buttstock to fit anyone. Plus the pistol grip on it is very soft in the hand.so buy one you’ll like it 100% more than the one that’s on it right now.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  189. Timothy T.

    T3 Shotgun Stock
    296

    by Timothy T.

    Great change from the traditional stock on a Remington 870 Tactical. I would recommend this product.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  190. Raul G.

    T3 shotgun stock
    296

    by Raul G.

    I’m loving how my mossberg 500 feels with the T3 ATI stock, I have an overall better control on the shotgun and shooting it feels great!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  191. Barry H.

    T3 stock
    296

    by Barry H.

    Added this to my Remington 870. Well made product. Highly reccomended

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  192. Paulino G.

    Simply amazing!!!
    296

    by Paulino G.

    This rifle stick compares to no other!! Easy installation, took me less than an hour. Significantly reduces recoil, even with buck shot and slug. Really improved the appearance of my shot gun too. You will not regret purchasing this stock

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  193. Mel J.

    Awesome Tactical stock
    296

    by Mel J.

    BEAUTIFUL REALLY FEELS GREAT….. VERY COMFORTABLE AND LOOKS TACTICAL THANKS FOR THE GREAT PRODUCT!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  194. Robert I.

    Steven's320
    296

    by Robert I.

    Bought the stock to replace the regional stock yet only problem I have is that it doesn’t fit my Stevens 320 so I have to modify it to fit it

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  195. Dan P.

    Less to No Fatigue
    296

    by Dan P.

    I put this stock onto my shotgun the day it arrived. It took about 30 minutes. The first difference I noticed was the softness of the butt piece compared to my stock 870 butt. The pistol grip is comfortable with that same material on the back of the grip which also reduced sliding of my hand on the grip.

    The best part about it is the reductikn of fatigue. I took it to my local gun club, Del Co Field and Stream Association, and shot 75 shells at clay pigeons. Normally my shoulder would begin to fatigue after a single box, but to my surprisr I went through all three with no noticeable pain. The next day, no pain either.

    It feels very sturdy so I can’t see myself ever breaking it, but if I do, i’ll be sure to speak with ATI to determine an agreeable resolution.

    Im am 100% satisfied and this stock has met up to all the stellar reviews it has received.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  196. Tyler W.

    The hype is real!
    296

    by Tyler W.

    I had done a LOT of research to transform my 500 for more tactical purposes. The general consensus lead me to ATI and most specifically, the T3 stock. Install was a breeze! The x2 recoil grip and buttpad does exactly what they designed it for, AND then some. Recoil reduction is significant enough to throw any of the other amazing variables that make up this upgrade out the door. But of course we can’t do that because ATI obviously put tons of effort and research into those variables to make this what I consider the ultimate replacement stock!

    Oh… let’s not forget how AMAZING this looks! My only issue is that this rating doesn’t have more than 5 stars that I can give it, which it most certainly deserves. In fact, I was so impressed that I have now fully furnished my 500 with the remaining available ATI furniture. Great job!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  197. Scott S.

    Shotgun stock
    296

    by Scott S.

    This item is great. Exactly what was expected at the time of purchase. Assembly was easy and directions were clear and concise

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  198. Jason T.

    T3 Shotgun Stock
    296

    by Jason T.

    I bought a Savage/Steven 320 pump shotgun about year ago. It shoot great no problems for mat all but I was looking for an extendable stock solution. Given that my shotgun model doesn�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â�¢�ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â���ï�¿�½�Ã�¯�ï�¿�½�Â�¿�ï�¿�½�Â�½�ï�¿�½�Ã���ï�¿�½�Â��t support to many aftermarket option, i was lucky enough to run across the T3 shotgun stock from ATIO. The stock is awesome!! Full 6 position stock with options for a cheek riser. It hardly added any additional weight to my overall setup. The instructions as to which adapter to use were clear. DO NOT TRY TO CUT corners with the instructions though. If you follow them to a tee you will have not problems at all. Thanks ATI!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  199. Al F.

    AT I. STOCK
    296

    by Al F.

    Recently I had purchase a AtI.tac3 for my Mossberg 500 and hands down couldn’t be happier , fits like a glove and the install was easy and the directions was spot on, definitely recommended it.and the turn around time was fast!!! Get one you won’t regret it..Thanks guys to the guys at AtI..Al from Tampa FL..

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  200. Antonio B.

    Love it!!!!
    296

    by Antonio B.

    Makes the biggest difference on my shot gun, pistol grip feels great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  201. Tim S.

    Stock
    296

    by Tim S.

    The fit is amazing the recoil reduction from the grip alone is amazing let alone the added reduction from the scorpion butpad …ended up getting the whole ati package for my 590 looks like a beast but not only looks great but is built so tuff …even the packaging is great…magnetic closure in the box and foam padding.. they go all out in customer satisfaction! AAA products!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  202. Gregg

    Nice stock. Excellent product.
    296

    by Gregg

    Nice stock . Fits nicely ony Winchester Marine Defender. Wish the adapters to pick from were labeled. Took looking back and forth to assembly pic directions to narrow it down. Overall very good stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  203. Alexander A.

    First Time Modification
    296

    by Alexander A.

    This was my first time modifying a firearm and it was fairly simple. The stock and pistol grip feel comfortable so far, but I have yet to try it out in the field.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  204. Roger F.

    Great Stock
    296

    by Roger F.

    The stock looks good and the adjustible length is very convenient. Really nice pad on it. The only reason I didn’t give it 5 stars is the assembly instructions could have been a little clearer, but the product itself is excellent.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  205. Steven J.

    High Quality
    296

    by Steven J.

    This product was high quality and looks great

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  206. Agustin C.

    T3 like magic.
    296

    by Agustin C.

    Recently acquired this stock after using manufactured stock for a while. I have tried many Collapsable stock but this one felt great. So I purchased it, I also decided to install it on a budget shotgun just to see how great it feels and I was definitely impressed. There was a down side for some reason on the STEVENS 320 12G I had to shave down the trigger guard without doing so I wouldn’t have been able to flush down the pistol grip. But it wasn’t to bad it was on a budget shotgun but if it was other higher end shotgun and still have to shaved down I would of not been so happy. Overall it was great on my hand, sweet on my shoulder and looks Sexy. I am definitely satisfied.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  207. Christopher T.

    T3 Shotgun Stock
    296

    by Christopher T.

    ATI did good when they made this one! Fit my TRISTAR Cobra Pump perfectly…Haven’t got to shoot it yet, but I can tell it will be just like a new shotgun and will be my “go to” pump at home in case of it being needed…shipping was not only on time, but came a day earlier than expected! Thanks!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  208. Alejandro C.

    Great stock
    296

    by Alejandro C.

    The cushion on the butt of the gun great absorbs the shock and the pistol grip has a nice smooth but firm grip

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  209. Marcus W.

    Great buttstock
    296

    by Marcus W.

    Easy to set up and install. Looks great on the shotgun. The tan against the black makes the gun stand out.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  210. Marc

    Awesome!
    296

    by Marc

    Solid, well made with nice adjustments. Wish it had a quick connect sling swivel mount where it connects to the shotgun receiver for a single point sling.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  211. Chris G.

    Ati stock
    296

    by Chris G.

    This stock is great! I had it installed less then 20 mins after I opened the box with no problem. It is comfortable and also looks great. It’s alot nicer then the comparable versions on the market. I will definitely be buying more gear from ATI

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  212. Clifton C.

    ATI on Remington 887
    296

    by Clifton C.

    Excellent stock really improved the look of my Remington 887…

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  213. Patrick M.

    way to save the day...
    296

    by Patrick M.

    mistakes are going to happen, in this case a wrong piece was sent with my order making for a very unstable fit. my natural reaction was to be pissed off….and I was. However, after shooting an email over to customer service, Troy took care of the problem without hesitation and made things right. Excellent product, excellent service, excellent people.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  214. Linburgh G.

    T3 shotgun stock
    296

    by Linburgh G.

    Fit great look fantastic

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  215. Forest D.

    What difference!
    296

    by Forest D.

    Great product! Really reduces recoil alot! Would definitely recommend this to anyone. Easy to install. Fast shipping.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  216. Justin N.

    love this product
    296

    by Justin N.

    I love this product! It makes my Savage more tactical and more comfortable to shoot!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  217. Ken J.

    UPDATE on my T3 review
    296

    by Ken J.

    I had an installation problem with my T3 related to incorrect instructions. See my review ( Great addition to my new gun) what I left out was how the stock adapter was damaged because of this problem. Long story short, next day I received an e-mail from ATI to contact them if I had any questions or needed help. So I did. THEY GOT BACK TO ME IN LESS THAN 6 HOURS!!! That alone was unbelievable, but it went on to say, with no questions asked, that a REPLACEMENT PART was being sent to me! AMAZING! I will be a lifelong ATI customer for that. Thank you Troy, and the whole gang at ATI. Don’t buy junk, buy made in USA!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  218. Ken J.

    Great addition to my new gun
    296

    by Ken J.

    Just picked up the T3 kit for my Mossberg 500 persuader at Cabelas today. Pre read all instructions, then re read and double checked as i went. I’m very comfortable doing this kind of thing as i repair stuff for a living. The install was straight forward with the right tools and the instructions were very clear. Had it wrapped up in about 45 minutes of taking my time and enjoying my new toy. Got it all together and it looked and felt great. No wobbles and no gaps, perfect! Ok, not perfect. One minor thing and one MAJOR thing. (1) The minor, they dont tell you you need to trim the excess foam off after you tape it to the pistol grip, this may be some of the gap complaints. (2) The MAJOR, I got the whole thing together and now THE GUN WILL NOT ELEVATE A ROUND INTO THE BREACH! WTF?! Worked great before with the origional stock. Ok, so here’s the problem. In the instruction where they tell you which bolt to use to mount the stock to your gun they left ONE VERY important step out. Under the mossberg description they DO NOT tell you to put the lock washer on. This in turn allows the bolt to travel to far into the trigger assy causing this problem. So i took it back apart, put the lock washer on and the gun works flawlessly. So i checked the websites directions and they have corrected this in the instructions. But remember, I just bought this TODAY 2/5/2017 so if Cabelas doesn’t have them with the latest instructions in the box yet, yours may not either. Hope this helps somebody else with a mossy if they have the same problem. So now i just have to get out and see how it works!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  219. David R.

    Going Tactical
    296

    by David R.

    For Christmas my wife gave me an 870 Remington12gauge. Being a Marine I had to go tactical, right. ATI had exactly what I was looking for. Outstanding service all the way through ATI.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  220. Philip E.

    Icing on the cake for my 877
    296

    by Philip E.

    This was a perfect fit for my Remington 877 where there are very few add on items for the 877 in the aftermarket sites. It was an easy install and looks fabulous. Adjustability works flawlessly and butt pad is very comfortable.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  221. Philip E.

    Icing on the cake for my 877
    296

    by Philip E.

    This was a perfect fit for my Remington 877 where there are very few add on items for the 877 in the aftermarket sites. It was an easy install and looks fabulous. Adjustability works flawlessly and butt pad is very comfortable.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  222. Dustin G.

    Good stuff
    296

    by Dustin G.

    Solid stock .

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  223. Lazaros S.

    Fits Stevens 320 like a glove
    296

    by Lazaros S.

    I recently purchased this stock to go on my 320 and after looking at other options this was my best bet. It is worth every penny. It really dressed up the shotgun nicely and the quality it top notch. Also the recoil pad really does reduce felt recoil by about 80%. Overall I am very happy with the purchase.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  224. Jasmany A.

    You will not get nothing better than this
    296

    by Jasmany A.

    Perfect fit, amazing tactical look. This system is so comfortable, practical and solid. I definitely recommend

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  225. Gary Y.

    Mosburg 500
    296

    by Gary Y.

    This is a gun I bought from a coworker it only had a pistol grip and it was all black I didn’t like shooting at all saw your page on Facebook bought the parts gave it a paint job turned out phenomenal I think it performs well and I am extremely satisfied with the product I purchased hope to do business with you in the future

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  226. Tyler J.

    Love this Stock for my 870
    296

    by Tyler J.

    I have used a similar type of stock overseas in the OIF campaign on my issued shotgun. I bought an 870 for home protection and outfitted it with the T3. Not only is this stock really comfortable in the shoulder and hand but I like how it allows me to tuck in elbow and become a smaller target. The extending action is tough yet smooth. I would recommend this to anyone.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  227. Elizabeth V.

    They are exactly what we want.
    296

    by Elizabeth V.

    Thank you

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  228. Alan N.

    T3 gunstock
    296

    by Alan N.

    Excellent product definitely lives up to my expectations!!!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  229. Allan A.

    good buy, fits several models of guns , but really check it before ordering
    296

    by Allan A.